1 files changed, 0 insertions, 88 deletions
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h b/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h
deleted file mode 100644
index c9a0b4f..0000000
--- a/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h
+++ /dev/null
@@ -1,88 +0,0 @@
-// Emisar D4S V2 tint-ramping config options for Anduril (based on Noctigon K9.3)
-// Copyright (C) 2021-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0135"
-#include "hwdef-Emisar_D4Sv2-tintramp.h"
-#include "hank-cfg.h"
-// ATTINY: 1634
-
-// this light has three aux LED channels: R, G, B
-#define USE_AUX_RGB_LEDS
-// the aux LEDs are front-facing, so turn them off while main LEDs are on
-// it also has an independent LED in the button
-#define USE_BUTTON_LED
-// TODO: the whole "indicator LED" thing needs to be refactored into
-//       "aux LED(s)" and "button LED(s)" since they work a bit differently
-// enabling this option breaks the button LED on D4v2.5
-#ifdef USE_INDICATOR_LED_WHILE_RAMPING
-#undef USE_INDICATOR_LED_WHILE_RAMPING
-#endif
-
-// has two channels of independent LEDs
-#define USE_TINT_RAMPING
-// how much to increase total brightness at middle tint
-// (0 = 100% brightness, 64 = 200% brightness)
-#define TINT_RAMPING_CORRECTION 0  // none, linear regulator doesn't need it
-
-// main LEDs
-//   output: unknown, 2000 lm?
-//   FET: absent / unused?
-// 2nd LEDs
-//   output: unknown, 2000 lm?
-#define RAMP_LENGTH 150
-// abstract ramp (power is split between both sets of LEDs)
-// 1-130: 0 to 100% power
-// level_calc.py 5.01 1 130 7135 2 0.2 2000 --pwm dyn:64:16383:511
-// 131 to 150: 101% to 200% power
-// level_calc.py 6.44 1 150 7135 1 0.2 2000 --pwm dyn:74:16383:1022
-#define PWM1_LEVELS 2,2,2,3,3,4,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,28,30,33,35,38,41,44,47,50,54,57,60,64,67,71,74,78,81,84,88,91,94,97,99,101,103,105,106,107,107,107,106,105,102,99,95,90,84,77,68,58,47,34,36,38,40,42,44,47,49,52,54,57,60,63,66,69,73,76,80,83,87,91,96,100,104,109,114,119,124,130,135,141,147,153,160,166,173,180,187,195,203,211,219,228,236,245,255,264,274,285,295,306,317,329,340,353,365,378,391,405,419,433,448,463,479,495,511,530,550,570,591,612,634,657,680,705,730,755,782,809,837,865,895,925,957,989,1022
-#define PWM_TOPS 16383,13234,9781,13826,9593,13434,9973,12021,12900,13193,13150,12899,12508,12023,12666,11982,12181,11422,11393,11247,11018,10731,10826,10434,10365,9927,9767,9565,9332,9076,8806,8693,8395,8096,7928,7626,7439,7143,6948,6665,6393,6203,5946,5700,5465,5187,4926,4681,4451,4195,3957,3700,3463,3213,2983,2718,2476,2231,1986,1742,1501,1245,997,756,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511
-#define DEFAULT_LEVEL 70
-#define MAX_1x7135 150
-#define HALFSPEED_LEVEL 10
-#define QUARTERSPEED_LEVEL 2
-
-#define USE_MANUAL_MEMORY_TIMER_FOR_TINT
-//#define DEFAULT_MANUAL_MEMORY        DEFAULT_LEVEL
-//#define DEFAULT_MANUAL_MEMORY_TIMER  10
-
-#define RAMP_SMOOTH_FLOOR 10  // level 1 is unreliable (?)
-#define RAMP_SMOOTH_CEIL  130
-// 10, 30, 50, [70], 90, 110, [130]
-#define RAMP_DISCRETE_FLOOR 10
-#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
-#define RAMP_DISCRETE_STEPS 7
-
-// safe limit highest regulated power (no FET or turbo)
-#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
-#define SIMPLE_UI_STEPS 5
-
-// stop panicking at ~1500 lm
-#define THERM_FASTER_LEVEL 130
-#define MIN_THERM_STEPDOWN 65  // should be above highest dyn_pwm level
-
-// use the brightest setting for strobe
-#define STROBE_BRIGHTNESS MAX_LEVEL
-// slow down party strobe; this driver can't pulse for 1ms or less
-#define PARTY_STROBE_ONTIME 2
-
-// the default of 26 looks a bit flat, so increase it
-#define CANDLE_AMPLITUDE 33
-
-// the power regulator is a bit slow, so push it harder for a quick response from off
-#define DEFAULT_JUMP_START_LEVEL 21
-#define BLINK_BRIGHTNESS DEFAULT_LEVEL
-#define BLINK_ONCE_TIME 12  // longer blink, since main LEDs are slow
-
-#define THERM_CAL_OFFSET 5
-
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-
-// for consistency with KR4 (not otherwise necessary though)
-#define USE_SOFT_FACTORY_RESET
-