2 files changed, 109 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/cfg-ff-pl47g2.h b/spaghetti-monster/anduril/cfg-ff-pl47g2.h
new file mode 100644
index 0000000..d5dd79d
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-ff-pl47g2.h
@@ -0,0 +1,60 @@
+// Fireflies PL47 G2 config options for Anduril
+#include "hwdef-FF_PL47.h"
+
+// the button lights up
+#define USE_INDICATOR_LED
+// the aux LEDs are in the same place as the main LEDs
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+// enable blinking indicator LED while off?
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3  // every 0.128 s
+#define USE_FANCIER_BLINKING_INDICATOR
+
+// If TICK_DURING_STANDBY is enabled...
+// off mode: low (1)
+// lockout: blinking (3)
+#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
+
+
+#define RAMP_LENGTH 150
+
+// driver is a FET + 3x7135, ~400 lm at highest regulated level
+// ramp copied from Emisar D4S ramp
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,5,6,6,7,8,8,9,10,10,11,12,13,14,15,16,17,18,19,21,22,23,25,26,27,29,31,32,34,36,38,40,42,44,46,49,51,54,56,59,62,65,68,71,74,78,81,85,89,93,97,101,106,110,115,120,125,130,136,141,147,153,160,166,173,180,187,195,202,210,219,227,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,5,7,8,10,11,13,14,16,18,19,21,23,25,27,29,31,34,36,38,41,43,46,48,51,54,57,60,63,66,69,72,76,79,83,87,91,95,99,103,107,112,116,121,126,131,136,141,146,152,158,163,169,175,182,188,195,202,209,216,223,231,239,247,255
+#define MAX_1x7135 83
+#define HALFSPEED_LEVEL 13
+#define QUARTERSPEED_LEVEL 6
+
+// thermal regulation parameters
+#ifdef MIN_THERM_STEPDOWN
+#undef MIN_THERM_STEPDOWN  // this should be lower, because 3x7135 instead of 1x7135
+#endif
+#define MIN_THERM_STEPDOWN 60  // lowest value it'll step down to
+
+// ceiling is level 120/150
+#define RAMP_SMOOTH_CEIL 120
+
+// 10, 28, 46, 65, [83], 101, 120
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL 120
+#define RAMP_DISCRETE_STEPS 7
+
+// ~25 lm to ~300 lm
+#define MUGGLE_FLOOR 30
+#define MUGGLE_CEILING MAX_1x7135
+
+// regulate down faster when the FET is active, slower otherwise
+#define THERM_FASTER_LEVEL 135  // throttle back faster when high
+
+// hard drop doesn't seem to be needed on this light
+#ifdef THERM_HARD_TURBO_DROP
+#undef THERM_HARD_TURBO_DROP
+#endif
+
+// don't do this
+#undef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_CEILING
+
diff --git a/spaghetti-monster/anduril/cfg-ff-rot66g2.h b/spaghetti-monster/anduril/cfg-ff-rot66g2.h
new file mode 100644
index 0000000..4e353a8
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-ff-rot66g2.h
@@ -0,0 +1,49 @@
+// Fireflies ROT66 G2 config options for Anduril
+#include "cfg-ff-rot66.h"
+
+// if the "low" mode was disabled, turn it back on
+#ifdef INDICATOR_LED_SKIP_LOW
+#undef INDICATOR_LED_SKIP_LOW
+#endif
+// enable blinking indicator LED while off
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3  // every 0.128 s
+#define USE_FANCIER_BLINKING_INDICATOR
+
+// lockout: blinking (3), off: low (1)
+#ifdef INDICATOR_LED_DEFAULT_MODE
+#undef INDICATOR_LED_DEFAULT_MODE
+#endif
+#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
+
+// ramp shape is different than original ROT66
+// 1x7135: 150 lm
+// Nx7135: 1200 lm
+// FET: 4500 lm
+// ../../../bin/level_calc.py 7.0 3 150 7135 1 4 180.16 7135 8 1 1374.48 FET 1 10 4000
+// (plus some manual tweaks)
+#undef PWM1_LEVELS
+#undef PWM2_LEVELS
+#undef PWM3_LEVELS
+#define PWM1_LEVELS 1,1,2,3,3,4,4,5,6,7,7,8,9,10,11,12,16,17,18,19,20,21,22,24,26,28,30,32,35,37,40,42,45,48,51,55,58,62,65,69,74,78,83,87,92,98,103,109,115,121,128,134,142,149,157,165,173,182,191,201,211,221,232,243,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,11,13,14,16,18,20,22,24,26,28,30,33,35,38,41,43,46,49,52,55,59,62,66,69,73,77,81,85,89,94,98,103,108,113,118,124,129,135,141,147,153,160,166,173,180,188,195,203,211,219,228,237,246,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM3_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,6,11,17,23,29,36,42,49,56,63,71,78,86,94,102,111,119,128,137,147,156,166,176,187,197,208,219,231,243,255
+
+#undef MAX_1x7135
+#undef MAX_Nx7135
+#define MAX_1x7135 65  // ~150 lm
+#define MAX_Nx7135 120  // ~1200 m
+#undef HALFSPEED_LEVEL
+#undef QUARTERSPEED_LEVEL
+#define HALFSPEED_LEVEL 17
+#define QUARTERSPEED_LEVEL 6
+
+// higher floor than default, and stop at highest regulated level
+#define RAMP_SMOOTH_FLOOR 1   // ~0.3 lm
+#define RAMP_SMOOTH_CEIL MAX_Nx7135  // ~1200 lm
+// 10, 28, 46, [65], 83, 101, [120]
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL MAX_Nx7135
+#define RAMP_DISCRETE_STEPS 7
+
+