diff options
Diffstat (limited to '')
| -rw-r--r-- | spaghetti-monster/anduril/cfg-noctigon-k9.3.c | 79 | ||||
| -rw-r--r-- | spaghetti-monster/anduril/cfg-noctigon-k9.3.h | 8 | ||||
| -rw-r--r-- | spaghetti-monster/anduril/misc.c | 5 | ||||
| -rw-r--r-- | spaghetti-monster/fsm-ramping.c | 4 |
4 files changed, 87 insertions, 9 deletions
diff --git a/spaghetti-monster/anduril/cfg-noctigon-k9.3.c b/spaghetti-monster/anduril/cfg-noctigon-k9.3.c index 5e3350a..5cb027a 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-k9.3.c +++ b/spaghetti-monster/anduril/cfg-noctigon-k9.3.c @@ -1,13 +1,28 @@ -#ifdef USE_SET_LEVEL_GRADUALLY +/* + * K9.3 has unusual power channels, so it must override some of FSM's code. + * There are two sets of LEDs: + * 1. Main LEDs: (9 x white LEDs) + * PWM1 (10-bit, linear) + * PWM2 (8-bit, FET, only used on some K9.3 models) + * 2. 2nd LEDs: (3 x white or color LEDs) + * PWM3 (10-bit, linear) + * + * The two sets are not used at the same time... just one or the other, + * depending on the "tint" variable. (0 = main LEDs, other value = 2nd LEDs) + */ +// if the gradual adjustment mechanism doesn't work, disable it here: +//#ifdef USE_SET_LEVEL_GRADUALLY //#undef USE_SET_LEVEL_GRADUALLY -#endif +//#endif +// this is inserted into fsm-ramping.c :: set_level() +// (it overrides part of the function, but not all of it) inline void set_level_override(uint8_t level) { - if (level == 0) { + if (level == 0) { // off PWM1_LVL = 0; PWM2_LVL = 0; PWM3_LVL = 0; - // disable the power channel + // disable both power channels LED_ENABLE_PORT &= ~(1 << LED_ENABLE_PIN); LED2_ENABLE_PORT &= ~(1 << LED2_ENABLE_PIN); } else { @@ -20,7 +35,9 @@ inline void set_level_override(uint8_t level) { LED2_ENABLE_PORT &= ~(1 << LED2_ENABLE_PIN); // set levels PWM1_LVL = PWM_GET(pwm1_levels, level); - PWM2_LVL = (uint8_t)(PWM_GET(pwm2_levels, level) >> 2); + #ifndef K93_NO_FET + PWM2_LVL = (uint8_t)(PWM_GET(pwm2_levels, level) >> 2); // 8 bits + #endif PWM3_LVL = 0; } else { // 2nd LEDs // disable other power channel @@ -34,3 +51,55 @@ inline void set_level_override(uint8_t level) { } } } + +// override fsm-ramping.c :: gradual_tick() +// (because the power handling on this light is weird) +// call this every frame or every few frames to change brightness very smoothly +void gradual_tick() { + // go by only one ramp level at a time instead of directly to the target + uint8_t gt = gradual_target; + if (gt < actual_level) gt = actual_level - 1; + else if (gt > actual_level) gt = actual_level + 1; + + gt --; // convert 1-based number to 0-based + + PWM_DATATYPE target; + + if (! tint) { // main LED channel + target = PWM_GET(pwm1_levels, gt); + if ((gt < actual_level) // special case for FET-only turbo + && (PWM1_LVL == 0) // (bypass adjustment period for first step) + && (target == PWM_TOP)) PWM1_LVL = PWM_TOP; + else if (PWM1_LVL < target) PWM1_LVL ++; + else if (PWM1_LVL > target) PWM1_LVL --; + + #ifndef K93_NO_FET // skip this on E21A model + target = PWM_GET(pwm2_levels, gt) >> 2; // 8 bits, not 10 + if (PWM2_LVL < target) PWM2_LVL ++; + else if (PWM2_LVL > target) PWM2_LVL --; + #endif + + // did we go far enough to hit the next defined ramp level? + // if so, update the main ramp level tracking var + if ((PWM1_LVL == PWM_GET(pwm1_levels, gt)) + #ifndef K93_NO_FET + && (PWM2_LVL == (PWM_GET(pwm2_levels, gt) >> 2)) + #endif + ) + { actual_level = gt + 1; } + } else { // 2nd LED channel + target = PWM_GET(pwm3_levels, gt); + if (PWM3_LVL < target) PWM3_LVL ++; + else if (PWM3_LVL > target) PWM3_LVL --; + + // did we go far enough to hit the next defined ramp level? + // if so, update the main ramp level tracking var + if ( PWM3_LVL == PWM_GET(pwm3_levels, gt) ) + { actual_level = gt + 1; } + } + + #ifdef USE_DYNAMIC_UNDERCLOCKING + auto_clock_speed(); + #endif +} + diff --git a/spaghetti-monster/anduril/cfg-noctigon-k9.3.h b/spaghetti-monster/anduril/cfg-noctigon-k9.3.h index 123dabe..e4524ec 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-k9.3.h +++ b/spaghetti-monster/anduril/cfg-noctigon-k9.3.h @@ -5,6 +5,7 @@ // this model requires some special code #define OVERRIDES_FILE cfg-noctigon-k9.3.c #define OVERRIDE_SET_LEVEL +#define OVERRIDE_GRADUAL_TICK inline void set_level_override(uint8_t level); @@ -66,9 +67,12 @@ inline void set_level_override(uint8_t level); //#define THERM_NEXT_WARNING_THRESHOLD 16 // accumulate less error before adjusting //#define THERM_RESPONSE_MAGNITUDE 128 // bigger adjustments +// use the brightest setting for strobe +#define STROBE_BRIGHTNESS MAX_LEVEL // slow down party strobe; this driver can't pulse for 1ms or less -// (only needed on no-FET build) -//#define PARTY_STROBE_ONTIME 2 +#define PARTY_STROBE_ONTIME 2 + +#define BLINK_ONCE_TIME 12 // longer blink, since main LEDs are slow #define THERM_CAL_OFFSET 5 diff --git a/spaghetti-monster/anduril/misc.c b/spaghetti-monster/anduril/misc.c index 63b8f48..523bbf0 100644 --- a/spaghetti-monster/anduril/misc.c +++ b/spaghetti-monster/anduril/misc.c @@ -38,13 +38,16 @@ void blink_confirm(uint8_t num) { // make a short, visible pulse // (either brighter or darker, depending on current brightness) +#ifndef BLINK_ONCE_TIME +#define BLINK_ONCE_TIME 10 +#endif void blink_once() { uint8_t brightness = actual_level; uint8_t bump = brightness + (MAX_LEVEL/6); if (bump > MAX_LEVEL) bump = 0; set_level(bump); - delay_4ms(10/4); + delay_4ms(BLINK_ONCE_TIME/4); set_level(brightness); } diff --git a/spaghetti-monster/fsm-ramping.c b/spaghetti-monster/fsm-ramping.c index 16bffe3..f092204 100644 --- a/spaghetti-monster/fsm-ramping.c +++ b/spaghetti-monster/fsm-ramping.c @@ -154,6 +154,7 @@ inline void set_level_gradually(uint8_t lvl) { gradual_target = lvl; } +#ifndef OVERRIDE_GRADUAL_TICK // call this every frame or every few frames to change brightness very smoothly void gradual_tick() { // go by only one ramp level at a time instead of directly to the target @@ -209,7 +210,8 @@ void gradual_tick() { auto_clock_speed(); #endif } -#endif +#endif // ifdef OVERRIDE_GRADUAL_TICK +#endif // ifdef USE_SET_LEVEL_GRADUALLY #endif // ifdef USE_RAMPING #endif |