1 files changed, 51 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/cfg-emisar-d1sv2.h b/spaghetti-monster/anduril/cfg-emisar-d1sv2.h
new file mode 100644
index 0000000..45424b3
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-emisar-d1sv2.h
@@ -0,0 +1,51 @@
+// Emisar D1S v2 config options for Anduril
+#include "hwdef-Emisar_D1Sv2.h"
+// ATTINY: 1634
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+#define USE_AUX_RGB_LEDS_WHILE_RAMPING
+
+// enable blinking aux LEDs
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3  // every 0.128 s
+
+
+// ../../bin/level_calc.py cube 1 150 7135 1 4 1300
+// (with max_pwm set to 1023)
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,32,34,36,38,40,43,45,47,49,52,54,57,60,62,65,68,71,74,77,81,84,87,91,95,98,102,106,110,114,118,122,127,131,136,141,145,150,155,160,166,171,176,182,188,193,199,205,211,218,224,231,237,244,251,258,265,272,280,287,295,303,310,319,327,335,344,352,361,370,379,388,397,407,416,426,436,446,457,467,477,488,499,510,521,533,544,556,568,580,592,604,617,629,642,655,668,682,695,709,723,737,751,766,781,795,810,826,841,857,872,888,904,921,937,954,971,988,1005,1023
+#define MAX_1x7135 65
+
+// the entire ramp is regulated; don't blink halfway up
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// don't slow down at low levels; this isn't that sort of light
+// (it needs to stay at full speed for the 10-bit PWM to work)
+#ifdef USE_DYNAMIC_UNDERCLOCKING
+#undef USE_DYNAMIC_UNDERCLOCKING
+#endif
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 130
+#define RAMP_DISCRETE_FLOOR 20
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// optional, makes initial turbo step-down faster so first peak isn't as hot
+// the D4 runs very very hot, so be extra careful
+//#define THERM_HARD_TURBO_DROP
+
+// stop panicking at ~70% power or ~900 lm
+#define THERM_FASTER_LEVEL 130
+// respond to thermal changes faster
+#define THERMAL_WARNING_SECONDS 3
+#define THERMAL_UPDATE_SPEED 1
+#define THERM_PREDICTION_STRENGTH 4
+
+// easier access to thermal config mode, for Emisar
+#define USE_TENCLICK_THERMAL_CONFIG
+
+#define THERM_CAL_OFFSET 5