1 files changed, 65 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/cfg-noctigon-k9.3.h b/spaghetti-monster/anduril/cfg-noctigon-k9.3.h
new file mode 100644
index 0000000..17c3c00
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-noctigon-k9.3.h
@@ -0,0 +1,65 @@
+// Noctigon KR4 config options for Anduril
+// (and Emisar D4v2.5, which uses KR4 driver plus a button LED)
+#define MODEL_NUMBER "0211"
+#include "hwdef-Noctigon_KR4.h"
+// ATTINY: 1634
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+//#define USE_AUX_RGB_LEDS_WHILE_ON
+// it also has an independent LED in the button (D4v2.5 titanium/brass only)
+#define USE_BUTTON_LED
+// TODO: the whole "indicator LED" thing needs to be refactored into
+//       "aux LED(s)" and "button LED(s)" since they work a bit differently
+// enabling this option breaks the button LED on D4v2.5
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+// enable blinking aux LEDs
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3  // every 0.128 s
+
+
+// brightness w/ SST-20 4000K LEDs:
+// 0/1023: 0.35 lm
+// 1/1023: 2.56 lm
+// max regulated: 1740 lm
+// FET: ~3700 lm
+// maxreg at 130: level_calc.py cube 2 150 7135 0 2.5 1740 FET 1 10 2565
+// maxreg at 120: level_calc.py cube 2 150 7135 0 2.5 1740 FET 1 10 3190
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 0,0,1,1,2,2,3,3,4,4,5,6,7,8,9,10,11,13,14,15,17,19,20,22,24,26,28,30,33,35,38,40,43,46,49,52,55,59,62,66,70,74,78,82,86,91,96,100,105,111,116,121,127,133,139,145,151,158,165,172,179,186,193,201,209,217,225,234,243,251,261,270,280,289,299,310,320,331,342,353,364,376,388,400,412,425,438,451,464,478,492,506,521,536,551,566,582,597,614,630,647,664,681,699,717,735,754,772,792,811,831,851,871,892,913,935,956,978,1001,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,22,51,79,109,138,168,198,229,260,292,324,357,390,423,457,492,527,562,598,634,671,708,746,784,822,861,901,941,982,1023
+#define DEFAULT_LEVEL 46
+#define MAX_1x7135 120
+#define HALFSPEED_LEVEL 10
+#define QUARTERSPEED_LEVEL 2
+
+#define RAMP_SMOOTH_FLOOR 3  // level 1 is unreliable
+#define RAMP_SMOOTH_CEIL  120
+// 10, 28, [46], 65, 83, 101, [120]
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// safe limit ~30% power / ~1400 lm (can sustain 900 lm)
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL 110
+#define SIMPLE_UI_STEPS 5
+
+// stop panicking at ~25% power or ~1000 lm
+#define THERM_FASTER_LEVEL 100
+#define MIN_THERM_STEPDOWN DEFAULT_LEVEL
+#define THERM_NEXT_WARNING_THRESHOLD 16  // accumulate less error before adjusting
+#define THERM_RESPONSE_MAGNITUDE 128  // bigger adjustments
+
+// slow down party strobe; this driver can't pulse for 1ms or less
+// (only needed on no-FET build)
+//#define PARTY_STROBE_ONTIME 2
+
+#define THERM_CAL_OFFSET 5
+
+// can't reset the normal way because power is connected before the button
+#define USE_SOFT_FACTORY_RESET