7 files changed, 139 insertions, 7 deletions
diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index 01904dc..085f4a3 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -105,6 +105,11 @@
 #include incfile(CONFIGFILE)
 
 
+// brightness to use when no memory is set
+#ifndef DEFAULT_LEVEL
+#define DEFAULT_LEVEL MAX_1x7135
+#endif
+
 // thermal properties, if not defined per-driver
 #ifndef MIN_THERM_STEPDOWN
 #define MIN_THERM_STEPDOWN MAX_1x7135  // lowest value it'll step down to
@@ -415,9 +420,6 @@ void save_config_wl();
 #endif
 
 // brightness control
-#ifndef DEFAULT_LEVEL
-#define DEFAULT_LEVEL MAX_1x7135
-#endif
 uint8_t memorized_level = DEFAULT_LEVEL;
 #ifdef USE_MANUAL_MEMORY
 uint8_t manual_memory = 0;
diff --git a/spaghetti-monster/anduril/cfg-emisar-d18.h b/spaghetti-monster/anduril/cfg-emisar-d18.h
index 155a747..72f0589 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d18.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d18.h
@@ -28,7 +28,7 @@
 #define QUARTERSPEED_LEVEL 6
 
 // start at ~2000 lm after battery change, not ~150 lm (at Emisar's request)
-#define DEFAULT_LEVEL MAX_Nx7135
+//#define DEFAULT_LEVEL MAX_Nx7135
 
 // higher floor than default, and stop at highest regulated level
 #define RAMP_DISCRETE_FLOOR 25
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4sv2.h b/spaghetti-monster/anduril/cfg-emisar-d4sv2.h
index c578c4a..0f3a217 100644
--- a/spaghetti-monster/anduril/cfg-emisar-d4sv2.h
+++ b/spaghetti-monster/anduril/cfg-emisar-d4sv2.h
@@ -33,7 +33,7 @@
 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
 #define RAMP_DISCRETE_STEPS 7
 
-#define DEFAULT_LEVEL MAX_Nx7135
+//#define DEFAULT_LEVEL MAX_Nx7135
 #define STROBE_BRIGHTNESS MAX_LEVEL
 
 #define MUGGLE_FLOOR RAMP_DISCRETE_FLOOR
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4v2.5-219.h b/spaghetti-monster/anduril/cfg-emisar-d4v2.5-219.h
new file mode 100644
index 0000000..c0a5b17
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-emisar-d4v2.5-219.h
@@ -0,0 +1,12 @@
+// Emisar D4v2.5 (75% FET) config options for Anduril
+// (adapted from cfg-noctigon-kr4-219.h)
+#include "cfg-emisar-d4v2.5.h"
+// ATTINY: 1634
+
+// don't turn off first channel at turbo level
+#undef PWM1_LEVELS
+#define PWM1_LEVELS 0,0,1,1,2,2,3,3,4,4,5,6,7,8,9,10,11,13,14,15,17,19,20,22,24,26,28,30,33,35,38,40,43,46,49,52,55,59,62,66,70,74,78,82,86,91,96,100,105,111,116,121,127,133,139,145,151,158,165,172,179,186,193,201,209,217,225,234,243,251,261,270,280,289,299,310,320,331,342,353,364,376,388,400,412,425,438,451,464,478,492,506,521,536,551,566,582,597,614,630,647,664,681,699,717,735,754,772,792,811,831,851,871,892,913,935,956,978,1001,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023
+// 75% FET power
+#undef PWM2_LEVELS
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,17,39,60,82,104,126,149,172,195,219,243,268,293,318,343,369,396,422,449,476,504,531,560,588,617,646,676,706,737,768
+
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4v2.5-nofet.h b/spaghetti-monster/anduril/cfg-emisar-d4v2.5-nofet.h
new file mode 100644
index 0000000..175774c
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-emisar-d4v2.5-nofet.h
@@ -0,0 +1,48 @@
+// Emisar D4v2.5 (fetless) config options for Anduril
+// (adapted from cfg-noctigon-kr4-nofet.h)
+#include "cfg-emisar-d4v2.5.h"
+// ATTINY: 1634
+
+// brightness w/ SST-20 4000K LEDs:
+// 0/1023: 0.35 lm
+// 1/1023: 2.56 lm
+// max regulated: 1740 lm
+// level_calc.py 3.0 1 150 7135 0 5 1740
+#undef PWM_CHANNELS
+#define PWM_CHANNELS 1
+#define RAMP_LENGTH 150
+#undef PWM1_LEVELS
+#define PWM1_LEVELS 0,0,1,1,2,2,3,3,4,4,5,5,6,7,8,9,10,11,12,13,15,16,17,18,20,21,23,24,26,27,29,31,33,35,37,39,41,43,45,48,50,53,55,58,61,63,66,69,72,75,79,82,85,89,92,96,100,104,108,112,116,120,125,129,134,138,143,148,153,158,163,169,174,180,185,191,197,203,209,215,222,228,235,242,248,255,263,270,277,285,292,300,308,316,324,333,341,350,359,368,377,386,395,405,414,424,434,444,454,465,475,486,497,508,519,531,542,554,566,578,590,603,615,628,641,654,667,680,694,708,722,736,750,765,779,794,809,825,840,856,872,888,904,920,937,954,971,988,1005,1023
+#undef PWM2_LEVELS
+#undef DEFAULT_LEVEL
+#define DEFAULT_LEVEL 50
+#undef MAX_1x7135
+#define MAX_1x7135 150
+
+#undef RAMP_SMOOTH_FLOOR
+#undef RAMP_SMOOTH_CEIL
+#undef RAMP_DISCRETE_FLOOR
+#undef RAMP_DISCRETE_CEIL
+#undef RAMP_DISCRETE_STEPS
+
+#define RAMP_SMOOTH_FLOOR 3  // level 1 is unreliable
+#define RAMP_SMOOTH_CEIL 130
+// 10, 30, [50], 70, 90, 110, 130  (plus [150] on turbo)
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+#undef MUGGLE_FLOOR
+#undef MUGGLE_CEILING
+#define MUGGLE_FLOOR RAMP_DISCRETE_FLOOR
+#define MUGGLE_CEILING 70
+
+// make candle mode wobble more
+#define CANDLE_AMPLITUDE 32
+
+// stop panicking at ~90% power or ~1600 lm
+#undef THERM_FASTER_LEVEL
+#define THERM_FASTER_LEVEL 143
+#undef MIN_THERM_STEPDOWN
+#define MIN_THERM_STEPDOWN DEFAULT_LEVEL
+
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4v2.5.h b/spaghetti-monster/anduril/cfg-emisar-d4v2.5.h
new file mode 100644
index 0000000..bc0cf60
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-emisar-d4v2.5.h
@@ -0,0 +1,70 @@
+// Emisar D4v2.5 config options for Anduril
+// (uses KR4 driver, plus a button LED)
+#include "hwdef-Noctigon_KR4.h"
+// ATTINY: 1634
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+// it also has an independent LED in the button
+#define USE_BUTTON_LED
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+// TODO: the whole "indicator LED" thing needs to be refactored into
+//       "aux LED(s)" and "button LED(s)" since they work a bit differently
+//#define USE_AUX_RGB_LEDS_WHILE_ON
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+#define RGB_LED_OFF_DEFAULT 0x17  // low, rainbow
+#define RGB_LED_LOCKOUT_DEFAULT 0x37  // blinking, rainbow
+#define RGB_RAINBOW_SPEED 0x03  // half a second per color
+
+// enable blinking aux LEDs
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3  // every 0.128 s
+//#define STANDBY_TICK_SPEED 4  // every 0.256 s
+//#define STANDBY_TICK_SPEED 5  // every 0.512 s
+
+
+// copied from Noctigon KR4
+// brightness w/ SST-20 4000K LEDs:
+// 0/1023: 0.35 lm
+// 1/1023: 2.56 lm
+// max regulated: 1740 lm
+// FET: ~3700 lm
+// maxreg at 130: level_calc.py cube 2 150 7135 0 2.5 1740 FET 1 10 2565
+// maxreg at 120: level_calc.py cube 2 150 7135 0 2.5 1740 FET 1 10 3190
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 0,0,1,1,2,2,3,3,4,4,5,6,7,8,9,10,11,13,14,15,17,19,20,22,24,26,28,30,33,35,38,40,43,46,49,52,55,59,62,66,70,74,78,82,86,91,96,100,105,111,116,121,127,133,139,145,151,158,165,172,179,186,193,201,209,217,225,234,243,251,261,270,280,289,299,310,320,331,342,353,364,376,388,400,412,425,438,451,464,478,492,506,521,536,551,566,582,597,614,630,647,664,681,699,717,735,754,772,792,811,831,851,871,892,913,935,956,978,1001,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,22,51,79,109,138,168,198,229,260,292,324,357,390,423,457,492,527,562,598,634,671,708,746,784,822,861,901,941,982,1023
+#define DEFAULT_LEVEL 46
+#define MAX_1x7135 120
+#define HALFSPEED_LEVEL 10
+#define QUARTERSPEED_LEVEL 2
+
+#define RAMP_SMOOTH_FLOOR 3  // level 1 is unreliable
+#define RAMP_SMOOTH_CEIL 120
+// 10, 28, [46], 65, 83, 101, [120]
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+#define MUGGLE_FLOOR RAMP_DISCRETE_FLOOR
+#define MUGGLE_CEILING 65
+
+// stop panicking at ~25% power or ~1000 lm
+#define THERM_FASTER_LEVEL 100
+#define MIN_THERM_STEPDOWN DEFAULT_LEVEL
+#define THERM_NEXT_WARNING_THRESHOLD 16  // accumulate less error before adjusting
+#define THERM_RESPONSE_MAGNITUDE 128  // bigger adjustments
+
+// easier access to thermal config mode
+#define USE_TENCLICK_THERMAL_CONFIG
+
+// slow down party strobe; this driver can't pulse for 1ms or less
+// (only needed on no-FET build)
+//#define PARTY_STROBE_ONTIME 2
+
+#define THERM_CAL_OFFSET 5
+
+// allow 13H reset for consistency with KR4
+#define USE_SOFT_FACTORY_RESET
diff --git a/spaghetti-monster/fsm-ramping.c b/spaghetti-monster/fsm-ramping.c
index bae601e..c3ad8b4 100644
--- a/spaghetti-monster/fsm-ramping.c
+++ b/spaghetti-monster/fsm-ramping.c
@@ -33,7 +33,7 @@ void set_level(uint8_t level) {
     #ifdef USE_INDICATOR_LED_WHILE_RAMPING
         #ifdef USE_INDICATOR_LED
         if (! go_to_standby)
-            indicator_led((level > 0) + (level > MAX_1x7135));
+            indicator_led((level > 0) + (level > DEFAULT_LEVEL));
         #endif
         //if (level > MAX_1x7135) indicator_led(2);
         //else if (level > 0) indicator_led(1);
@@ -47,7 +47,7 @@ void set_level(uint8_t level) {
             #ifdef USE_AUX_RGB_LEDS
                 rgb_led_set(0);
                 #ifdef USE_BUTTON_LED
-                    button_led_set((level > 0) + (level > MAX_1x7135));
+                    button_led_set((level > 0) + (level > DEFAULT_LEVEL));
                 #endif
             #endif
         }