diff options
Diffstat (limited to 'spaghetti-monster')
| -rw-r--r-- | spaghetti-monster/anduril/cfg-noctigon-k1-boost.h (renamed from spaghetti-monster/anduril/cfg-noctigon-k1-12v.h) | 58 |
1 files changed, 43 insertions, 15 deletions
diff --git a/spaghetti-monster/anduril/cfg-noctigon-k1-12v.h b/spaghetti-monster/anduril/cfg-noctigon-k1-boost.h index dbd0353..0684ce7 100644 --- a/spaghetti-monster/anduril/cfg-noctigon-k1-12v.h +++ b/spaghetti-monster/anduril/cfg-noctigon-k1-boost.h @@ -1,10 +1,10 @@ -// Noctigon K1 12V config options for Anduril +// Noctigon K1 boost config options for Anduril // Copyright (C) 2019-2023 Selene ToyKeeper // SPDX-License-Identifier: GPL-3.0-or-later #pragma once #define MODEL_NUMBER "0253" -#include "hwdef-Noctigon_K1-12V.h" +#include "hwdef-noctigon-k1-boost.h" #include "hank-cfg.h" // ATTINY: 1634 @@ -18,31 +18,39 @@ // this light has three aux LED channels: R, G, B #define USE_AUX_RGB_LEDS -#define USE_AUX_RGB_LEDS_WHILE_ON +#define USE_AUX_RGB_LEDS_WHILE_ON 25 #define USE_INDICATOR_LED_WHILE_RAMPING - +#if 0 // old, 10-bit PWM method // level_calc.py cube 1 150 7135 0 4 1300 // (with max_pwm set to 1023) // (level 0 is usable on this light) #define RAMP_LENGTH 150 #define PWM1_LEVELS 0,0,1,1,2,2,3,3,4,5,5,6,7,8,9,10,11,12,13,14,15,16,17,19,20,22,23,25,26,28,30,31,33,35,37,39,42,44,46,48,51,53,56,59,61,64,67,70,73,76,80,83,86,90,94,97,101,105,109,113,117,122,126,130,135,140,144,149,154,159,165,170,175,181,187,193,198,204,211,217,223,230,236,243,250,257,264,271,279,286,294,302,310,318,326,334,343,351,360,369,378,387,397,406,416,426,436,446,456,466,477,488,499,510,521,532,544,555,567,579,591,604,616,629,642,655,668,682,695,709,723,737,751,766,780,795,810,825,841,856,872,888,904,921,937,954,971,988,1005,1023 #define MAX_1x7135 50 - -// the entire ramp is regulated; don't blink halfway up -#ifdef BLINK_AT_RAMP_MIDDLE -#undef BLINK_AT_RAMP_MIDDLE -#endif - // don't slow down at low levels; this isn't that sort of light // (it needs to stay at full speed for the 10-bit PWM to work) #ifdef USE_DYNAMIC_UNDERCLOCKING #undef USE_DYNAMIC_UNDERCLOCKING #endif +#endif + +#define RAMP_SIZE 150 +// delta-sigma modulated PWM (0b0HHHHHHHHLLLLLLL = 0, 8xHigh, 7xLow bits) +// level_calc.py 5.01 1 150 7135 0 0.2 2000 --pwm 32640 +// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM) +#define PWM1_LEVELS 0,1,2,3,4,5,6,7,9,10,12,14,17,19,22,25,28,32,36,41,45,50,56,62,69,76,84,92,101,110,121,132,143,156,169,184,199,215,232,251,270,291,313,336,360,386,414,442,473,505,539,574,612,651,693,736,782,829,880,932,987,1045,1105,1168,1233,1302,1374,1449,1527,1608,1693,1781,1873,1969,2068,2172,2279,2391,2507,2628,2753,2883,3018,3158,3303,3454,3609,3771,3938,4111,4289,4475,4666,4864,5068,5280,5498,5724,5957,6197,6445,6701,6965,7237,7518,7808,8106,8413,8730,9056,9392,9737,10093,10459,10835,11223,11621,12031,12452,12884,13329,13786,14255,14737,15232,15741,16262,16798,17347,17911,18489,19082,19691,20314,20954,21609,22281,22969,23674,24397,25137,25895,26671,27465,28279,29111,29963,30835,31727,32640 +#define MIN_THERM_STEPDOWN 50 +#define DEFAULT_LEVEL 70 +#define MAX_1x7135 150 +// always run at 1/4th speed, because 4 kHz PWM is enough for this circuit +// and speed changes make a big visible bump +#define HALFSPEED_LEVEL 255 +#define QUARTERSPEED_LEVEL 255 #define RAMP_SMOOTH_FLOOR 1 #define RAMP_SMOOTH_CEIL 130 -// 10, 30, [50], 70, 90, 110, 130 +// 10, 30, 50, [70], 90, 110, 130 #define RAMP_DISCRETE_FLOOR 10 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL #define RAMP_DISCRETE_STEPS 7 @@ -52,17 +60,37 @@ #define SIMPLE_UI_CEIL 120 #define SIMPLE_UI_STEPS 5 -// make candle mode wobble more -#define CANDLE_AMPLITUDE 32 - // stop panicking at ~70% power or ~600 lm #define THERM_FASTER_LEVEL 130 +#define THERM_CAL_OFFSET 5 + #define THERM_RESPONSE_MAGNITUDE 32 // smaller adjustments, this host changes temperature slowly #define THERM_NEXT_WARNING_THRESHOLD 32 // more error tolerance before adjusting +// show each channel while it scroll by in the menu +#define USE_CONFIG_COLORS + +// blink numbers on the main LEDs by default (but allow user to change it) +#define DEFAULT_BLINK_CHANNEL CM_MAIN + // slow down party strobe; this driver can't pulse for 1ms or less #define PARTY_STROBE_ONTIME 4 -#define THERM_CAL_OFFSET 5 +// use aux red + aux blue for police strobe +#define USE_POLICE_COLOR_STROBE_MODE +#define POLICE_STROBE_USES_AUX +#define POLICE_COLOR_STROBE_CH1 CM_AUXRED +#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU + +// make candle mode wobble more +#define CANDLE_AMPLITUDE 33 + +// the entire ramp is regulated; don't blink halfway up +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +// added for convenience +#define USE_SOFT_FACTORY_RESET |