diff options
Diffstat (limited to 'spaghetti-monster')
| -rw-r--r-- | spaghetti-monster/anduril/anduril-manual.txt | 84 |
1 files changed, 64 insertions, 20 deletions
diff --git a/spaghetti-monster/anduril/anduril-manual.txt b/spaghetti-monster/anduril/anduril-manual.txt index 74ca0c7..ef0ad5f 100644 --- a/spaghetti-monster/anduril/anduril-manual.txt +++ b/spaghetti-monster/anduril/anduril-manual.txt @@ -51,8 +51,8 @@ light to someone else, or if you just don't want to bother with any crazy disco modes. Simple UI has all the basic functions needed to work as a flashlight, -but the minimum and maximum brightness are limited to make it safer, and -any complex or advanced functions are blocked. +but the minimum and maximum brightness are limited by default to make it +safer, and any complex or advanced functions are blocked. Functions available in Simple UI include: @@ -112,6 +112,29 @@ counting it like music to make it easier: Simple UI is enabled after each factory reset. +Simple UI can be configured in several ways, but not while Simple UI is +active. So go to the Advanced UI, configure things, then go back to +Simple UI. + +Configurable options include: + + - floor level + - ceiling level + - number of steps (in stepped ramp) + - turbo style + +Other options are inherited from Advanced UI: + + - ramp style (smooth / stepped) + - smooth ramp speed + - ramp-after-moon style + - memory settings + - auto-lock settings + - aux LED settings + - voltage calibration + - thermal regulation settings + - hardware-specific "misc menu" settings + Advanced UI ----------- @@ -168,15 +191,30 @@ While the light is on, a few actions are available: - 7H: Ramp config menu. - Item 1: Floor level. - Item 2: Ceiling level. - - Item 3: Number of steps (except for smooth ramp). + - Item 3: + Stepped ramp: Number of steps. Can be 1 to 150. + Smooth ramp: Ramp speed. + 1 = Full speed, ~2.5s from end to end. + 2 = Half speed, ~5s from end to end. + 3 = Third speed, ~7.5s. + 4 = Quarter speed, ~10s. - 10C: Activate manual memory and save the current brightness. - - 10H: Manual memory config menu. + - 10H: Ramp extras config menu. - Item 1: Disable manual memory and go back to automatic memory. (doesn't matter what value the user enters at the prompt) - Item 2: Configure the manual memory timer. Sets the timer to N minutes, where N is the number of clicks. A value of 0 (no clicks) turns the timer off. + - Item 3: Configure whether to ramp up after "Off -> 1H". + 0: Ramp up after moon. + 1: Don't ramp up, just stay at the floor level. + - Item 4: Configure Advanced UI's turbo style: + 0: No turbo, only ceiling. + 1: Anduril 1 style. Ramp -> 2C goes to full power. + 2: Anduril 2 style. Ramp -> 2C goes to ceiling, + or goes to full power if user ramped up to ceiling first. + This value also affects momentary turbo in Ramp and Off modes. Memory determines which brightness level the light goes to with 1 click from off. There are three types of brightness memory to choose from: @@ -240,6 +278,7 @@ more than 2 times when the light is off: - 4C: Lockout mode. - 5C: Momentary mode. - 7C / 7H: Aux LED configuration. + - 9H: Misc configuration menu. (only on some lights) - 10H: Simple UI configuration menu. - 13H: Factory reset (on some lights). - 15C or more: Version check. @@ -508,10 +547,11 @@ final click) to access the config menu for the current ramp. Or, to access the ramp config for Simple UI, make sure the Simple UI is not active, then do a 10H action from Off. -For smooth ramping mode, there are two menu options: +For smooth ramping mode, there are three menu options: 1. Floor. (default = 1/150) 2. Ceiling. (default = 120/150) + 3. Ramp speed. (default = 1, fastest speed) For the stepped ramping mode, there are three menu options: @@ -519,12 +559,13 @@ For the stepped ramping mode, there are three menu options: 2. Ceiling. (default = 120/150) 3. Number of steps. (default = 7) -For the Simple UI mode, there are three menu options. They are the same -as stepped ramping mode. +For the Simple UI mode, there are four menu options. The first three +are the same as stepped ramping mode. 1. Floor. (default = 20/150) 2. Ceiling. (default = 120/150) 3. Number of steps. (default = 5) + 4. Turbo style. (default = 0, no turbo) Default values are different for each model of flashlight. The numbers above are only examples. @@ -639,17 +680,12 @@ when the main emitters are on, and when the light is otherwise awake. The aux LEDs on most lights only turn on when the light is asleep. -Global Config Menu ------------------- +Misc Config Menu +---------------- Some models may have an extra config menu for settings which don't fit anywhere else. These settings are, in order: - - 2C style: (not yet implemented) - - 1: 2C goes to turbo (Anduril V1 style) - 2: 2C goes to ramp ceiling (Anduril V2 style) - - Jump Start level: Some lights are prone to starting up slowly at low levels, so they @@ -657,9 +693,9 @@ anywhere else. These settings are, in order: level for a few milliseconds when changing from off to a low level. This setting specifies how bright that pulse should be. - The value can be from 1 to 150, but is usually between 10 and 30. + The value can be from 1 to 150, but is usually between 20 and 50. -Some settings are hardware-specific and may not be present on all +These settings are hardware-specific and may not be present on all lights. The number of settings in the global menu depends on the hardware model and the firmware version. @@ -705,10 +741,14 @@ Off Any 4C Lockout mode Off Full 5C Momentary mode Off Full 7C Aux LEDs: Next pattern Off Full 7H Aux LEDs: Next color -Off Full 9H Global config menu +Off Full 9H Misc config menu (varies per light) Off Full 10C Enable Simple UI Off Simple 10H Disable Simple UI -Off Full 10H Simple UI ramp config menu (1: floor, 2: ceiling, [3: steps]) +Off Full 10H Simple UI ramp config menu: + 1: floor + 2: ceiling + 3: steps + 4: turbo style Off Any 13H Factory reset (on some lights) Off Any 15+C Version check @@ -723,9 +763,13 @@ Ramp Full 3H Momentary turbo (on lights without tint ramping) Ramp Any 4C Lockout mode Ramp Full 5C Momentary mode Ramp Full 5H Sunset timer on, and add 5 minutes -Ramp Full 7H Ramp config menu (1: floor, 2: ceiling, [3: steps]) +Ramp Full 7H Ramp config menu (1: floor, 2: ceiling, 3: speed/steps) Ramp Full 10C Turn on manual memory and save current brightness -Ramp Full 10H Manual memory config menu (1: off, 2: set timeout) +Ramp Full 10H Ramp Extras config menu: + 1: enable automatic mem + 2: set manual mem timeout + 3: ramp after moon or not + 4: advanced UI turbo style Lockout Any 1C/1H Momentary moon (lowest floor) Lockout Any 2C/2H Momentary moon (highest floor, or manual mem level) |