aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster
diff options
context:
space:
mode:
Diffstat (limited to 'spaghetti-monster')
-rw-r--r--spaghetti-monster/anduril/MODELS1
-rw-r--r--spaghetti-monster/anduril/anduril-manual.txt2
-rw-r--r--spaghetti-monster/anduril/anduril-ui.pngbin281904 -> 282516 bytes
-rw-r--r--spaghetti-monster/anduril/anduril.c1
-rw-r--r--spaghetti-monster/anduril/anduril.svg32
-rw-r--r--spaghetti-monster/anduril/cfg-fw3x-lume1.h94
-rw-r--r--spaghetti-monster/anduril/ramp-mode.c14
-rw-r--r--spaghetti-monster/fsm-adc.c14
-rw-r--r--spaghetti-monster/fsm-ramping.c24
9 files changed, 152 insertions, 30 deletions
diff --git a/spaghetti-monster/anduril/MODELS b/spaghetti-monster/anduril/MODELS
index 96ec795..173620a 100644
--- a/spaghetti-monster/anduril/MODELS
+++ b/spaghetti-monster/anduril/MODELS
@@ -22,6 +22,7 @@ Model numbers:
0311 fw3a
0312 fw3a-219
0313 fw3a-nofet
+0314 fw3x-lume1
0321 blf-gt
0322 blf-gt-mini
0411 ff-rot66
diff --git a/spaghetti-monster/anduril/anduril-manual.txt b/spaghetti-monster/anduril/anduril-manual.txt
index faa8b19..b3a1cef 100644
--- a/spaghetti-monster/anduril/anduril-manual.txt
+++ b/spaghetti-monster/anduril/anduril-manual.txt
@@ -158,6 +158,7 @@ While the light is on, a few actions are available:
- 3C: Switch to the other ramp style. (smooth / stepped)
- 3H: Tint ramping (on lights which have it).
+ - 3H: Momentary turbo (on lights with no tint ramping).
- 4C: Go to lockout mode.
@@ -690,6 +691,7 @@ Ramp Simple 2C Go to/from ceiling
Ramp Full 2C Go to/from ceiling (or turbo if at ceil already)
Ramp Full 3C Change ramp style (smooth / stepped)
Ramp Any 3H Tint ramping (on some lights)
+Ramp Any 3H Momentary turbo (on lights without tint ramping)
Ramp Any 4C Lockout mode
Ramp Full 5C Momentary mode
Ramp Full 5H Sunset timer on, and add 5 minutes
diff --git a/spaghetti-monster/anduril/anduril-ui.png b/spaghetti-monster/anduril/anduril-ui.png
index 70f6be0..8f60cc8 100644
--- a/spaghetti-monster/anduril/anduril-ui.png
+++ b/spaghetti-monster/anduril/anduril-ui.png
Binary files differ
diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index 549fe46..de9b332 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -85,6 +85,7 @@
// (include this one last)
#include "load-save-config-fsm.h"
+
/********* bring in FSM / SpaghettiMonster *********/
#define USE_IDLE_MODE // reduce power use while awake and no tasks are pending
diff --git a/spaghetti-monster/anduril/anduril.svg b/spaghetti-monster/anduril/anduril.svg
index d58e478..2ecb530 100644
--- a/spaghetti-monster/anduril/anduril.svg
+++ b/spaghetti-monster/anduril/anduril.svg
@@ -18,8 +18,8 @@
inkscape:version="0.92.4 (5da689c313, 2019-01-14)"
sodipodi:docname="anduril.svg"
inkscape:export-filename="/tmp/anduril-ui.png"
- inkscape:export-xdpi="109.75774"
- inkscape:export-ydpi="109.75774">
+ inkscape:export-xdpi="67.543221"
+ inkscape:export-ydpi="67.543221">
<defs
id="defs4">
<marker
@@ -2851,7 +2851,7 @@
inkscape:pageopacity="1"
inkscape:pageshadow="2"
inkscape:zoom="1.0500861"
- inkscape:cx="341.22418"
+ inkscape:cx="72.674772"
inkscape:cy="568.52482"
inkscape:document-units="px"
inkscape:current-layer="layer1"
@@ -2959,29 +2959,7 @@
y="145.69688"
x="1339.1499"
id="image21186"
- xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAGQAAAMgCAYAAADVw8ezAAAABmJLR0QA/wD/AP+gvaeTAAAACXBI
-WXMAAC4mAAAuJgFVH1qAAAAAB3RJTUUH4wgWFywjmzkvJwAABGZJREFUeNrt08ENg0AQBEFjbf6R
-9vP+kMUKoeoQpjTXOef+6TX9TQBEQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIgQARE
-QIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIg
-QAREQIAICBABASIgQAREQIAICBABASIgQAQEiIAICBABASIgX28qK3iIgAARECACAkRAgAiIgAAR
-ECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAiI
-gAARECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAgIEAERECACAkRAgAgIEAERECACAkRA
-gGivqazgIQICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAIC
-RECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEi
-IEAERECACAgQAQEiIEAERECACAgQAQGivaaygocICBABASIgQAQEiIAICBABASIgQAQEiIAICBAB
-ASIgQAQEiIAICBABASIgQAQEiIAICBABASIgQAQEiIAICBABASIgQAQEiIAICBABASIgQAQEiIAI
-CBABASIgQAQEiIAICBABASIgQAQEiIAAERABASIgQAQEiIAAERABASIgQAQEiPaaygoeIiBABASI
-gAARECACIiBABASIgAARECACIiBABASIgAARECACIiBABASIgAARECACIiBABASIgAARECACIiBA
-BASIgAARECACIiBABASIgAARECACIiBABASIgAARECACIiBABASIgAARECACAkRABASIgAARECAC
-AkRABASIgAARECDaayoreIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQ
-IAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiA
-ABEQIAICRECACAgQAREQIAICRECACAgQAREQIAICRECAaK+prOAhAgJEQIAICBABASIgAgJEQIAI
-CBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgAgJE
-QIAICBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABAaK9
-prKChwgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEB
-IiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAAR
-EAEBIiBABASIgAAREAEBIiBABASI9noABIsdhY+pbIsAAAAASUVORK5CYII=
-"
+ xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAGQAAAMgCAYAAADVw8ezAAAABmJLR0QA/wD/AP+gvaeTAAAACXBI WXMAAC4mAAAuJgFVH1qAAAAAB3RJTUUH4wgWFywjmzkvJwAABGZJREFUeNrt08ENg0AQBEFjbf6R 9vP+kMUKoeoQpjTXOef+6TX9TQBEQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIgQARE QIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABASIg QAREQIAICBABASIgQAREQIAICBABASIgQAQEiIAICBABASIgX28qK3iIgAARECACAkRAgAiIgAAR ECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAiI gAARECACAkRAgAiIgAARECACAkRAgAiIgAARECACAkRAgAgIEAERECACAkRAgAgIEAERECACAkRA gGivqazgIQICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAIC RECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEiIAICRECACAgQAQEi IEAERECACAgQAQEiIEAERECACAgQAQGivaaygocICBABASIgQAQEiIAICBABASIgQAQEiIAICBAB ASIgQAQEiIAICBABASIgQAQEiIAICBABASIgQAQEiIAICBABASIgQAQEiIAICBABASIgQAQEiIAI CBABASIgQAQEiIAICBABASIgQAQEiIAAERABASIgQAQEiIAAERABASIgQAQEiPaaygoeIiBABASI gAARECACIiBABASIgAARECACIiBABASIgAARECACIiBABASIgAARECACIiBABASIgAARECACIiBA BASIgAARECACIiBABASIgAARECACIiBABASIgAARECACIiBABASIgAARECACAkRABASIgAARECAC AkRABASIgAARECDaayoreIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQ IAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiAABEQIAICRECACIiA ABEQIAICRECACAgQAREQIAICRECACAgQAREQIAICRECAaK+prOAhAgJEQIAICBABASIgAgJEQIAI CBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgAgJE QIAICBABASIgAgJEQIAICBABASIgAgJEQIAICBABASIgQAREQIAICBABASIgQAREQIAICBABAaK9 prKChwgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEB IiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAgIEAEBIiBABASIgAAR EAEBIiBABASIgAAREAEBIiBABASI9noABIsdhY+pbIsAAAAASUVORK5CYII= "
preserveAspectRatio="none"
height="261.36438"
width="17.741749" />
@@ -3826,7 +3804,7 @@ EAEBIiBABASIgAAREAEBIiBABASI9noABIsdhY+pbIsAAAAASUVORK5CYII=
transform="translate(4.5029255)"><textPath
xlink:href="#path5213-6-8-4-9-9-1-3-0"
id="textPath20024"><tspan
- id="tspan7287-5-5-6-6-4"> Click, Click, Hold</tspan></textPath></text>
+ id="tspan7287-5-5-6-6-4"> Click, Click, Hold (3H)</tspan></textPath></text>
<path
style="fill:none;stroke:#000000;stroke-width:2.13333344;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker-end:url(#Arrow1Mend-88-7-6)"
d="m 1058.2677,758.40918 c 0.4912,-26.15636 0.9882,-169.24427 7.3904,-226.98309"
diff --git a/spaghetti-monster/anduril/cfg-fw3x-lume1.h b/spaghetti-monster/anduril/cfg-fw3x-lume1.h
new file mode 100644
index 0000000..75853ec
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-fw3x-lume1.h
@@ -0,0 +1,94 @@
+/* lume1 for FW3x config options for Anduril
+ * Constant current Buck-Boost + FET driver
+ * For more information: www.loneoceans.com/labs/
+ * Datasheets:
+ * - 1634: http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8303-8-bit-AVR-Microcontroller-tinyAVR-ATtiny1634_Datasheet.pdf
+ * - 85: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2586-AVR-8-bit-Microcontroller-ATtiny25-ATtiny45-ATtiny85_Datasheet.pdf
+ */
+
+// TODO: determine if "03" (Lumintop) is the right prefix,
+// or if there should be a brand ID for LoneOceans
+#define MODEL_NUMBER "0314"
+
+#include "hwdef-fw3x-lume1.h"
+// ATTINY: 1634
+
+// set this light for 50C thermal ceiling
+#undef DEFAULT_THERM_CEIL
+#define DEFAULT_THERM_CEIL 50
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// it has no independent LED in the button unlike emisar d4
+//#define USE_BUTTON_LED
+
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+#define RGB_LED_OFF_DEFAULT 0x18 // low, voltage
+#define RGB_LED_LOCKOUT_DEFAULT 0x37 // blinking, rainbow
+
+// enable blinking aux LEDs
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3 // every 0.128 s
+//#define STANDBY_TICK_SPEED 4 // every 0.256 s
+//#define STANDBY_TICK_SPEED 5 // every 0.512 s
+
+// ../../bin/level_calc.py cube 1 149 7135 0 0.5 1000, with 0 appended to the end.
+// for FET PWM (PWM2), all values are 0, except for last value of 1023
+// (with max_pwm set to 1023)
+#define RAMP_LENGTH 150
+//#define PWM1_LEVELS 0,0,0,0,1,1,1,1,2,2,2,3,3,4,4,5,5,6,7,7,8,9,10,11,12,13,14,15,16,17,19,20,22,23,25,26,28,30,32,34,36,38,40,42,45,47,49,52,55,58,60,63,66,70,73,76,80,83,87,91,94,98,102,107,111,115,120,124,129,134,139,144,150,155,160,166,172,178,184,190,196,203,209,216,223,230,237,244,252,259,267,275,283,291,299,308,316,325,334,343,353,362,372,382,392,402,412,423,433,444,455,466,478,489,501,513,525,538,550,563,576,589,602,616,630,644,658,672,687,701,716,731,747,762,778,794,810,827,844,861,878,895,913,930,948,967,985,1004,1023,0
+#define PWM1_LEVELS 1,1,1,1,2,2,2,2,3,3,3,4,4,5,5,6,6,7,8,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,33,35,37,39,41,43,45,48,50,53,56,58,61,64,67,70,74,77,80,84,88,91,95,99,103,108,112,116,121,125,130,135,140,145,150,156,161,167,173,178,184,191,197,203,210,217,223,230,238,245,252,260,268,275,283,292,300,308,317,326,335,344,353,363,372,382,392,402,413,423,434,445,456,467,478,490,502,514,526,538,551,563,576,589,603,616,630,644,658,672,687,702,717,732,747,763,778,794,811,827,844,861,878,895,913,931,949,967,985,1004,1023,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1023
+#define DEFAULT_LEVEL 56
+#define MAX_1x7135 149
+// TODO: test if underclocking works on lume1
+//#define HALFSPEED_LEVEL 14
+//#define QUARTERSPEED_LEVEL 5
+// don't slow down at low levels; this isn't that sort of light
+// (it needs to stay at full speed for the 10-bit PWM to work)
+#ifdef USE_DYNAMIC_UNDERCLOCKING
+#undef USE_DYNAMIC_UNDERCLOCKING
+#endif
+
+// the entire ramp is regulated except turbo; don't blink halfway up
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 149
+// turn on BuckBoost from level 1 to 149, but not 150
+// Level 150 is when BuckBoost is off and FET is ON 100%
+#define LED_ENABLE_PIN_LEVEL_MIN 1
+#define LED_ENABLE_PIN_LEVEL_MAX 149
+// 10 33 56 79 102 125 [149]
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// Muggle mode: Goal from about ~10 lumens to about ~300+ lumens
+// In this case, ramp number 99 is about 1A to the driver
+#define MUGGLE_FLOOR RAMP_DISCRETE_FLOOR
+#define MUGGLE_CEILING 99
+
+// slow down party strobe; this driver can't pulse for too short a time
+#define PARTY_STROBE_ONTIME 4
+
+// optional, makes initial turbo step-down faster so first peak isn't as hot
+// FET mode can run very very hot, so be extra careful
+//#define THERM_HARD_TURBO_DROP
+
+// stop panicking at ~85% regulated power or ~750 lm
+#define THERM_FASTER_LEVEL 140
+
+#define THERM_CAL_OFFSET 0 // not needed due to external sensor
+
+// easier access to thermal config mode, similar to Emisar, Noctigon
+#define USE_TENCLICK_THERMAL_CONFIG
+
+// can't reset the normal way because power is connected before the button
+#define USE_SOFT_FACTORY_RESET
diff --git a/spaghetti-monster/anduril/ramp-mode.c b/spaghetti-monster/anduril/ramp-mode.c
index 34c2511..9d6eba9 100644
--- a/spaghetti-monster/anduril/ramp-mode.c
+++ b/spaghetti-monster/anduril/ramp-mode.c
@@ -358,6 +358,20 @@ uint8_t steady_state(Event event, uint16_t arg) {
return MISCHIEF_MANAGED;
}
+ #ifndef USE_TINT_RAMPING
+ // 3H: momentary turbo (on lights with no tint ramping)
+ else if (event == EV_click3_hold) {
+ if (! arg) { // first frame only, to allow thermal regulation to work
+ set_level_and_therm_target(MAX_LEVEL);
+ }
+ return MISCHIEF_MANAGED;
+ }
+ else if (event == EV_click3_hold_release) {
+ set_level_and_therm_target(memorized_level);
+ return MISCHIEF_MANAGED;
+ }
+ #endif // ifndef USE_TINT_RAMPING
+
#ifdef USE_MOMENTARY_MODE
// 5 clicks: shortcut to momentary mode
else if (event == EV_5clicks) {
diff --git a/spaghetti-monster/fsm-adc.c b/spaghetti-monster/fsm-adc.c
index 4766786..71ecf65 100644
--- a/spaghetti-monster/fsm-adc.c
+++ b/spaghetti-monster/fsm-adc.c
@@ -20,6 +20,14 @@
#ifndef FSM_ADC_C
#define FSM_ADC_C
+// override onboard temperature sensor definition, if relevant
+#ifdef USE_EXTERNAL_TEMP_SENSOR
+#ifdef ADMUX_THERM
+#undef ADMUX_THERM
+#endif
+#define ADMUX_THERM ADMUX_THERM_EXTERNAL_SENSOR
+#endif
+
static inline void set_admux_therm() {
#if (ATTINY == 1634)
@@ -345,7 +353,13 @@ static inline void ADC_temperature_handler() {
// let the UI see the current temperature in C
// Convert ADC units to Celsius (ish)
+ #ifndef USE_EXTERNAL_TEMP_SENSOR
+ // onboard sensor for attiny25/45/85/1634
temperature = (measurement>>1) + THERM_CAL_OFFSET + (int16_t)therm_cal_offset - 275;
+ #else
+ // external sensor
+ temperature = EXTERN_TEMP_FORMULA(measurement>>1) + THERM_CAL_OFFSET + (int16_t)therm_cal_offset;
+ #endif
// how much has the temperature changed between now and a few seconds ago?
int16_t diff;
diff --git a/spaghetti-monster/fsm-ramping.c b/spaghetti-monster/fsm-ramping.c
index f092204..0768f8d 100644
--- a/spaghetti-monster/fsm-ramping.c
+++ b/spaghetti-monster/fsm-ramping.c
@@ -80,16 +80,25 @@ void set_level(uint8_t level) {
LED2_ENABLE_PORT &= ~(1 << LED2_ENABLE_PIN);
#endif
} else {
- level --;
-
// enable the power channel, if relevant
#ifdef LED_ENABLE_PIN
- LED_ENABLE_PORT |= (1 << LED_ENABLE_PIN);
+ #ifndef LED_ENABLE_PIN_LEVEL_MIN
+ LED_ENABLE_PORT |= (1 << LED_ENABLE_PIN);
+ #else
+ // only enable during part of the ramp
+ if ((level >= LED_ENABLE_PIN_LEVEL_MIN)
+ && (level <= LED_ENABLE_PIN_LEVEL_MAX))
+ LED_ENABLE_PORT |= (1 << LED_ENABLE_PIN);
+ else // disable during other parts of the ramp
+ LED_ENABLE_PORT &= ~(1 << LED_ENABLE_PIN);
+ #endif
#endif
#ifdef LED2_ENABLE_PIN
LED2_ENABLE_PORT |= (1 << LED2_ENABLE_PIN);
#endif
+ level --;
+
#ifdef USE_TINT_RAMPING
#ifndef TINT_RAMPING_CORRECTION
#define TINT_RAMPING_CORRECTION 26 // 140% brightness at middle tint
@@ -162,6 +171,15 @@ void gradual_tick() {
if (gt < actual_level) gt = actual_level - 1;
else if (gt > actual_level) gt = actual_level + 1;
+ #ifdef LED_ENABLE_PIN_LEVEL_MIN
+ // only enable during part of the ramp
+ if ((gt >= LED_ENABLE_PIN_LEVEL_MIN)
+ && (gt <= LED_ENABLE_PIN_LEVEL_MAX))
+ LED_ENABLE_PORT |= (1 << LED_ENABLE_PIN);
+ else // disable during other parts of the ramp
+ LED_ENABLE_PORT &= ~(1 << LED_ENABLE_PIN);
+ #endif
+
gt --; // convert 1-based number to 0-based
PWM_DATATYPE target;
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 15:18:20 +0000