aboutsummaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* fixed builds of Werner's UI on targets which had been failing (Noctigon K1, B...Selene ToyKeeper2020-05-142-3/+10
* fixed eeprom_wl functions on attiny1634Selene ToyKeeper2020-05-141-10/+10
* fixed build of "momentary" example UISelene ToyKeeper2020-05-142-2/+1
* fixed build when USE_GOODNIGHT_MODE not enabledSelene ToyKeeper2020-05-141-0/+14
* removed unused TEMP_CHANNEL thing from FSM-related codeSelene ToyKeeper2020-04-2913-30/+3
* merged Noctigon KR4 and K1-12V (XHP35) branchesSelene ToyKeeper2020-04-2714-23/+542
|\
| * calibrated K1 and K1-12V thermal response (smaller, slower) and candle mode (...Selene ToyKeeper2020-04-272-2/+16
| * set default thermal response magnitude back to how it was before the KR4 upda...Selene ToyKeeper2020-04-272-2/+3
| * applied ADC rewrite updates to most recent build targetsSelene ToyKeeper2020-04-264-15/+3
| * merged Noctigon KR4 branch, including recent ADC+thermal rewriteSelene ToyKeeper2020-04-2638-429/+657
| |\
| | * added tweakable thermal_response_magnitude option, adjusted KR4 thermal vars,...Selene ToyKeeper2020-04-192-12/+12
| | * made thermal response larger when error is large, smaller when error is smallSelene ToyKeeper2020-04-191-2/+8
| | * KR4-noFET: made candle mode vary more since the ramp is stretched out, raised...Selene ToyKeeper2020-04-191-2/+5
| | * anduril: made aux RGB rainbow mode speed configurable per build targetSelene ToyKeeper2020-04-191-1/+4
| | * added a Noctigon KR4 219 (75% FET) build targetSelene ToyKeeper2020-03-281-0/+11
| | * Noctigon KR4 needed tighter/faster thermal response, and Hank wants RGB rainb...Selene ToyKeeper2020-03-261-1/+3
| | * made thermal regulation use a smaller target window, and prioritize cooling moreSelene ToyKeeper2020-03-261-3/+3
| | * added dynamic underclocking to KR4 to increase moon runtime, fixed ramp miles...Selene ToyKeeper2020-03-212-15/+11
| | * fixed potential eeprom corruption after turning boost/opamp chip on/offSelene ToyKeeper2020-03-211-0/+16
| | * enabled soft factory reset on KR4, raised default floor to the lowest reliabl...Selene ToyKeeper2020-03-202-2/+4
| | * added reboot() support for tiny1634Selene ToyKeeper2020-03-201-8/+10
| | * removed old thermal junk and voltage_lowpass junk from cfg filesSelene ToyKeeper2020-03-163-29/+0
| | * fixed calc_voltage_divider() (use 10-bit calibration values, not 8-bit)Selene ToyKeeper2020-03-161-1/+1
| | * merged fsm branch (to get adc-rework branch with new thermal regulation)Selene ToyKeeper2020-03-1632-410/+367
| | |\
| | * | added FETless KR4 build target, calibrated other KR4 therm faster level betterSelene ToyKeeper2020-03-162-2/+47
| | * | fixed the ADC channel for voltage measurementSelene ToyKeeper2020-03-061-2/+2
| | * | FET ramp was too steep; slowed it down by 50% (20 steps -> 30 steps)Selene ToyKeeper2020-03-061-11/+10
| | * | KR4: added FET channel, measured output, calibrated rampSelene ToyKeeper2020-03-062-5/+13
| | * | initial support for Noctigon KR4Selene ToyKeeper2020-03-054-0/+223
| * | | fixed eeprom corruption after turning boost chip on/offSelene ToyKeeper2020-02-271-0/+16
| * | | K1 12V needs party strobe slowed down even moreSelene ToyKeeper2020-02-261-1/+1
| * | | added support for boost PMIC enable pin (K1 12V has 2 pins which need to turn...Selene ToyKeeper2020-02-252-2/+12
| * | | Added template files for Noctigon K1 12V model.Selene ToyKeeper2020-02-252-0/+206
| |/ /
* | | added a noFET build for D4v2, by requestSelene ToyKeeper2020-04-132-1/+35
* | | recalibrated timing of nice_delay_ms() based on strobe speed measurements...Selene ToyKeeper2020-04-132-5/+5
* | | apparently the D1 can also be purchased with a D4v2 driver... so it's basica...Selene ToyKeeper2020-03-221-0/+17
* | | merged Noctigon K1 branch, which changes a few things...Selene ToyKeeper2020-03-1810-69/+354
|\ \ \
| * \ \ merged fsm branch, mostly to get new ADC code (thermal regulation and voltage...Selene ToyKeeper2020-03-1635-443/+368
| |\ \ \ | |/ / / |/| / / | |/ /
* | / removed more references to THERM_HARD_TURBO_DROPSelene ToyKeeper2020-03-164-19/+0
| |/ |/|
* | merged adc-rework branch, which rewrote all ADC code (voltage, temperature, a...Selene ToyKeeper2020-03-1631-408/+365
|\ \
| * | fixed a few things in ramping-ui, rampingiosv3, and werner's UISelene ToyKeeper2020-03-163-14/+13
| * | merged some misc fixes from pakutrai, cleaned up comments, removed unused sym...Selene ToyKeeper2020-03-1615-87/+18
| * | increased blink speed slightly, and added a library function to blink out 16-...Selene ToyKeeper2020-03-161-3/+25
| * | deleted commented-out WDT code from previous revisionSelene ToyKeeper2020-03-161-7/+0
| * | cleaned up WDT ADC timer code slightly, and removed a bit of redundant codeSelene ToyKeeper2020-03-161-6/+8
| * | reduced regulation jitter by biasing errors toward zero by a constant amount,Selene ToyKeeper2020-03-161-1/+14
| * | the ADC sample count doesn't need to be 16-bit any more, and isn't really a c...Selene ToyKeeper2020-03-152-3/+4
| * | removed dead comments and dead codeSelene ToyKeeper2020-03-151-28/+2
| * | replaced temperature_timer (which wasn't even being used) with a variable del...Selene ToyKeeper2020-03-151-27/+43
| * | tried to make thermal code a bit less twitchy...Selene ToyKeeper2020-03-133-13/+19
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.