aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* calibrated KR4 jump-start-moon, may be too high on some older hardwareSelene ToyKeeper2021-08-122-2/+2
|
* KR4 thermal regulation no longer needs overrides, because dynamic PWM makes ↵Selene ToyKeeper2021-08-121-2/+3
| | | | | | | the defaults work better (the overrides were mostly needed as a side effect of having 1024 PWM steps instead of 256)
* got PFM / dynamic PWM actually working on Noctigon KR4Selene ToyKeeper2021-08-128-33/+89
| | | | | | (and also added "jump start moon" to it) (and generally finished adding dynamic PWM support to FSM)
* changed Noctigon KR4 from fixed to dynamic PWM TOP value, for later useSelene ToyKeeper2021-08-121-2/+9
|
* made PWM TOP value configurable at command line in level_calc.py, and added ↵Selene ToyKeeper2021-08-121-9/+70
| | | | | | | | a "dynamic PWM" feature (uses a different PWM TOP at each of the first N ramp levels, to increase resolution at bottom end of ramp)
* added a "jump start moon" option for hold-from-off, for lights with ↵Selene ToyKeeper2021-08-121-0/+13
| | | | | | slow-activating circuits (briefly pulses the light at a higher level to wake up the circuit faster)
* made blink_once() brightness configurable per buildSelene ToyKeeper2021-08-121-2/+5
|
* document the actual maximum for manual memory timer (~140 minutes, not 255)Selene ToyKeeper2021-08-122-1/+6
|
* added Nichia 219B build for KR4 and K9.3, adjusted 219C builds, for intl-outdoorSelene ToyKeeper2021-07-255-5/+38
|
* allow building only some targets, instead of always doing allSelene ToyKeeper2021-07-251-0/+13
|
* summarize results at end of batch build processSelene ToyKeeper2021-07-221-1/+30
|
* give a more useful error message when t1616 files aren't installedSelene ToyKeeper2021-07-221-2/+11
|
* rewrote hybrid memory (manual memory timer) to eliminate corner casesSelene ToyKeeper2021-07-111-15/+14
| | | | | | | | | | | | | | | | | | | | Old method: - at 1-click power-on, choose a brightness based on off-time (manual level or last-ramped level) New method: - when off longer than the timer, set last-ramped level to manual level This fixes a bug: - turn light off - wait for timer - turn light on with a shortcut to moon - turn light off - turn light on - pre-patch, light went to last-ramped level instead of manual level This change also reduces the ROM size slightly.
* added Emisar D18 Nichia 219 build target (same as normal but reduced FET power)Selene ToyKeeper2021-07-112-0/+15
|
* set Emisar/Noctigon "219" builds to 65% FET powerSelene ToyKeeper2021-07-095-8/+20
| | | | | | (was 75% or 80% before) (change requested by Emisar)
* added missing ifdefs for compiling without USE_SIMPLE_UISelene ToyKeeper2021-05-231-1/+9
| | | | | (compiles now, but isn't tested on hardware)
* oops, somehow I forgot to add this earlier... Hank's UI preferences ↵Selene ToyKeeper2021-05-131-0/+21
| | | | (applies to all Emisar / Noctigon lights)
* made manual memory remember tint too, not just brightnessSelene ToyKeeper2021-05-075-17/+33
|
* aux LED config cleaning...Selene ToyKeeper2021-04-1426-107/+15
| | | | | | | | | | | | | | | | | | | | - use fancy blinking mode by default (define USE_OLD_BLINKING_INDICATOR if old slow mode is wanted) - remove TICK_DURING_STANDBY from all cfg-*.h files because it's enabled automatically by other features anyway (autolock, memory timer) - remove STANDBY_TICK_SPEED from cfg-*.h because all the values matched the default anyway so it was redundant - set rot66 button LED to high+blinking instead of high+off (it was only "off" because it ran out of space, and that was resolved) - enabled fancier indicator by default on fireflies-ui and rampingiosv3, since its other #define clauses were removed (not sure if those older UIs still compile, but if so, it's worth at least trying not to break it)
* config updates for Hank (Emisar / Noctigon):Selene ToyKeeper2021-04-1312-7/+11
| | | | | | | | | | | | - use cycling rainbow mode by default on lights with RGB LEDs (instead of voltage, because it's better for impressing new users) - use 2C turbo instead of 2C ceiling (Anduril 1 style instead of Anduril 2 style) also some other minor housekeeping... - make all K1 models use consistent rainbow cycling speed - enable auto-lock and manual memory timer on Emisar D1v2 - remove redundant RGB config on Lume1 (it had incorrect comments anyway)
* fixed missing ifdef for simple UISelene ToyKeeper2021-04-131-1/+4
|
* fixed wrong word in manual (turbo is in full UI only)Selene ToyKeeper2021-04-131-1/+1
|
* merged gchart's Tiny1 series branch for t1616 supportSelene ToyKeeper2021-04-0219-16/+849
|\
| * re-numbered t1616 builds to reflect manufacturer betterSelene ToyKeeper2021-04-025-8/+8
| | | | | | | | | | (all the Sofirn ones are pre-production builds intended to go on new Sofirn-produced hardware)
| * fixed blinking aux LED on gchart-fet1-t1616 (was fast and bright, now uses ↵Selene ToyKeeper2021-04-021-0/+5
| | | | | | | | 2-level heartbeat pattern)
| * need to do some measurements sometime to determine if fast or phase-correct ↵Selene ToyKeeper2021-04-021-0/+3
| | | | | | | | PWM is better on t1616
| * added attiny1616 flashing instructions, and made flash-tiny1616.sh ↵Selene ToyKeeper2021-04-012-3/+45
| | | | | | | | configurable via environment variables
| * reverted version.h back to generic originalSelene ToyKeeper2021-04-011-1/+4
| |
| * minor formatting cleanup on t1616 hwdef filesSelene ToyKeeper2021-04-013-27/+31
| |
| * Renamed gchart-fet1-t16 to t1616, to make it consistent with other t1616 models.Selene ToyKeeper2021-04-013-4/+4
| |
| * slightly reorganized declaration of PCINT to make it easier to readSelene ToyKeeper2021-04-011-16/+10
| |
| * touched up a bit of formatting and a note for later optimizationSelene ToyKeeper2021-04-012-4/+8
| |
| * Added attiny1616 info to the README, and made bin/build.sh support more ↵Selene ToyKeeper2021-04-012-3/+31
| | | | | | | | | | | | flexible. Set ATTINY_DFP environment variable in your shell to the location of the unzipped DFP files.
| * merged gchart's Tiny1 series branch for tiny1616 supportSelene ToyKeeper2021-04-0119-8/+758
|/|
| * Merge TKs changes from 2021-01-25Gabriel Hart2021-02-0115-16/+492
| |\ | |/ |/|
* | updated MODELS file with missing K9.3-nofet build targetSelene ToyKeeper2021-01-251-0/+1
| |
* | removed redundant function call, added missing commentSelene ToyKeeper2021-01-252-4/+1
| |
* | bug pseudo-fix: K9.3 lockout mode failed in blinking single-color modeSelene ToyKeeper2021-01-252-0/+12
| | | | | | | | | | | | because of what appears to be compiler jank or a race condition or some other highly unusual issue (fixed by eating up extra clock cycles in the affected code path)
* | merged noctigon k9.3 branchSelene ToyKeeper2021-01-2414-15/+481
|\ \
| * | noctigon k9.3: default to aux RGB rainbow mode, and automatic memorySelene ToyKeeper2020-12-131-2/+3
| | |
| * | enabled memory timer and resetting tint after timeout on K9.3Selene ToyKeeper2020-10-223-2/+15
| | | | | | | | | | | | | | | (unsure if I'll keep it this way though, or if the old way was better)
| * | nope, the pins weren't swapped... the wires on the prototype were reversedSelene ToyKeeper2020-10-181-12/+12
| | | | | | | | | | | | | | | (code was correct before, but the test hardware was wrong)
| * | swapped PWM1 and PWM3 channels on K9.3, because I may have had them backwardSelene ToyKeeper2020-10-161-12/+12
| | |
| * | added K9.3-noFET build target (for models with E21A as main LEDs)Selene ToyKeeper2020-10-162-1/+55
| | |
| * | start tint at 0 instead of 128 on lights with toggle instead of rampSelene ToyKeeper2020-10-161-0/+4
| | |
| * | made gradual_tick() work on K9.3 (via override), fixed strobe config,Selene ToyKeeper2020-10-154-9/+87
| | | | | | | | | | | | | | | made blink_once() more configurable (and more reliable on K9.3)
| * | got K9.3 2nd LEDs working (and modified FSM to allow this sort of thing)Selene ToyKeeper2020-10-146-2/+86
| | | | | | | | | | | | | | | | | | | | | | | | added a way to include per-model code overrides added an override mechanism for logic inside set_level() wrote K9.3's set_level() function added TINT_RAMP_TOGGLE_ONLY mode for tint ramping
| * | configured K9.3 cfg (mostly), assigned a model number, fixed typo in hwdefSelene ToyKeeper2020-10-143-18/+20
| | | | | | | | | | | | | | | | | | (main LEDs work now; 2nd LEDs not yet) (aux and button LEDs work too, plus switch)
| * | copied KR4 cfg to K9.3 cfgSelene ToyKeeper2020-10-141-0/+65
| | |
| * | configured K9.3 hwdefSelene ToyKeeper2020-10-141-34/+48
| | |
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 17:02:14 +0000