aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* added Noctigon DM11-SBT90.2 buildSelene ToyKeeper2022-03-243-11/+229
| | | | | | (which is mostly like the regular linear+FET build, but has the switch on a different pin for some reason)
* fixed bug where tint-ramping could end up 1 brightness ramp step different ↵Selene ToyKeeper2021-12-131-1/+3
| | | | than it started
* Added "Lockout 3C -> Off", changed Lockout 4H blink (light) to a blip (dark),Selene ToyKeeper2021-12-134-1/+28
| | | | | adjusted a couple builds which overflowed.
* enabled SOS mode on lights which have enough room for itSelene ToyKeeper2021-12-083-2/+4
|
* added a compile option for USE_LOWPASS_WHILE_ASLEEP,Selene ToyKeeper2021-12-085-5/+32
| | | | | | | | | | | but it doesn't actually fix the issue I was hoping it'd fix, so it's disabled by default (when the battery is right on a threshold between colors for aux LED "voltage" mode, it can bounce between colors until the cell isn't on the boundary any more... but a simple lowpass doesn't really help) (but I also didn't want to throw out the code, in case it's useful later as a reference for a more effective solution)
* fixed Ramp 3H with Anduril 2 style turboSelene ToyKeeper2021-12-083-0/+16
| | | | | | (it was going to ceiling instead of full power) (also had to disable battcheck calibration on some large builds to make room)
* merged Noctigon DM11 branchSelene ToyKeeper2021-11-126-0/+516
|\
| * a bit more fine-tuning for DM11Selene ToyKeeper2021-11-123-8/+9
| |
| * added DM11 to MODELS fileSelene ToyKeeper2021-11-121-0/+3
| |
| * merged anduril2 branch for updatesSelene ToyKeeper2021-11-1219-86/+225
| |\ | |/ |/|
* | fixed KR4-tintramp build (switch wasn't working) and added it to MODELSSelene ToyKeeper2021-11-033-8/+8
| |
* | reset tint while changing tint ramp styleSelene ToyKeeper2021-11-031-1/+5
| |
* | added runtime config to choose tint-ramping or tint-toggleSelene ToyKeeper2021-11-038-32/+54
| | | | | | | | | | (Off->9H option 1, 0=smooth, 1=toggle)
* | added KR4-tintramp buildSelene ToyKeeper2021-11-033-1/+63
| | | | | | | | | | | | (is basically identical to D4Sv2-tintramp, but with the switch on a different pin, and no button LED)
* | documented number entry 1H action (add 10) in UI tableSelene ToyKeeper2021-10-311-0/+1
| |
* | made d4sv2-tintramp-fet work the same as no-fet version, but with added FET ↵Selene ToyKeeper2021-10-312-9/+17
| | | | | | | | | | | | | | from ramp step 141 to 150 (0 to 100% power from 1 to 130, 101% to 200% from 131 to 150, and +DD FET from 141 to 150) also calibrated candle mode a bit better
* | fixed flicker on inactive tint ramp channel during rampingSelene ToyKeeper2021-10-311-2/+8
| |
* | added "200%" turbo on tint-ramping lights: D4S and LT1Selene ToyKeeper2021-10-315-37/+71
| | | | | | | | | | | | | | | | | | | | Normal ramp from 0% to 100% power on levels 1 to 130, then 101% to 200% power at levels 131 to 150 using both channels at maximum for turbo. When either channel would go over 100%, the extra spills over to the other channel.
* | Clarified Ramp->2C behavior a bit more.Selene ToyKeeper2021-10-281-4/+4
| | | | | | | | | | (old wording was confusing people)
* | fixed too-slow thermal regulation bug introduced in d4sv2-tintramp branchSelene ToyKeeper2021-10-251-0/+2
| | | | | | | | | | | | | | | | (2021-09-10 r619.1.11) The gradual_target var was getting clobbered and causing thermal regulation to stop until the next thermal warning event, every time it reached a new ramp step. So... save/restore it to prevent it from getting clobbered.
* | don't blink when toggling tintSelene ToyKeeper2021-10-141-1/+1
| |
* | don't hardcode 2.9V for aux LED shutoffSelene ToyKeeper2021-10-091-1/+1
| | | | | | | | | | (use the same value as LVP; easier to configure if it's in only one place)
| * fine-tuned DM11-12V build a bit based on actual measurementsSelene ToyKeeper2021-11-121-7/+11
| |
| * renamed MD11 -> DM11 because Hank changed the product nameSelene ToyKeeper2021-10-125-12/+12
| |
| * added early initial attempt at a boost/12V/6V version of the MD11Selene ToyKeeper2021-10-042-0/+232
| | | | | | | | | | (had to guess about some hardware details, unsure if correct)
| * added MD11-noFET, tweaked values in MD11-FET build tooSelene ToyKeeper2021-09-242-3/+46
| |
| * unsure which pin MD11 uses for switch; added a potential change for laterSelene ToyKeeper2021-09-241-2/+11
| |
| * added dynamic PWM and FET to MD11Selene ToyKeeper2021-09-242-27/+51
| |
| * just a few adjustments to start withSelene ToyKeeper2021-09-242-17/+22
| |
| * copied Noctigon K1 -> MD11 to start defining a new lightSelene ToyKeeper2021-09-242-0/+195
|/
* added attiny type to the MODELS file, rewrote how MODELS file gets generatedSelene ToyKeeper2021-09-223-60/+128
| | | | | (because it's kind of important to know which MCU each light uses, and because this will be helpful later when the build system is rewritten)
* clarified where brightness level comes from in beacon/sos/momentary modesSelene ToyKeeper2021-09-171-6/+6
|
* merged K9.3-tintramp / D4Sv2-tintramp branchSelene ToyKeeper2021-09-1518-87/+764
|\ | | | | | | | | | | (which also changed the way tint ramping is implemented, to make things generally cleaner and more flexible)
| * added Noctigon K9.3-tintramp build targets for FET, reduced FET, and noFETSelene ToyKeeper2021-09-153-0/+157
| | | | | | | | | | | | | | (apparently Hank liked the D4Sv2-tintramp demo/experiment so much that he decided to use it in production for the K9.3... so it need its own builds since it's a pretty different light even if the driver is almost identical)
| * fixed wrong value on D4Sv2-tintramp ramp calculator (was off by one)Selene ToyKeeper2021-09-151-3/+3
| |
| * fixed builds which failed due to being too big (rot66, mf01-mini)Selene ToyKeeper2021-09-102-0/+4
| | | | | | | | | | | | by turning off one more of the recent extra features (can turn it back on later if the build size goes down)
| * fixed K9.3 builds (oops, new update_tint() needed to be compiled out for K9.3)Selene ToyKeeper2021-09-102-2/+2
| |
| * fixed blf-lantern-t1616 build... I thinkSelene ToyKeeper2021-09-102-16/+109
| | | | | | | | | | (can't test because I have no hardware, but it at least compiles)
| * fixed ancient bug which caused a weird up-spike in thermal regulation during ↵Selene ToyKeeper2021-09-101-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | initial turbo drop, on 3-channel drivers like FW3A and ROT66 (as shown here: http://toykeeper.net/torches/fw3a/therm-2019-05-22.1.png ) What happened was... the FET would start to drop, but gradual adjustments noticed that the Nx7135 channel needed to go from 0 to 255, so it would then slowly ramp that up, and then afterward, the FET drop could finally continue... because the code didn't jump straight from 0 to 255 like it was supposed to. Simple, easy fix: Make channel 2 go up immediately just like channel 1 does. This makes the thermal response several seconds faster than it was before, so it doesn't get as hot, and is less likely to overshoot and bounce later.
| * added D4Sv2-tintramp-FET build, which uses a FET on one set of LEDs for ↵Selene ToyKeeper2021-09-104-15/+86
| | | | | | | | | | | | | | | | | | turbo modes (it's weird, but Hank wants it) also reworked gradual tint adjustment a bit, so some complex parts go in set_level() instead (probably needs more testing)
| * added -mrelax to build.sh; saves ~330 bytes on t1634 buildsSelene ToyKeeper2021-09-101-1/+1
| | | | | | | | | | | | (suggested by solrize) (doesn't seem to reduce size of t85 builds though)
| * changed D4Sv2-tintramp from 255 to 511 for lowest PWM TOP value,Selene ToyKeeper2021-09-082-5/+5
| | | | | | | | | | | | to make its thermal regulation smoother and generally increase tint ramp resolution in middle modes (also, tried thermal regulation, and it works)
| * got BLF LT1 working again, using new tint-ramping codeSelene ToyKeeper2021-09-083-31/+50
| |
| * fixed D4Sv2-tintramp PWM_TOP (should be set to the value it needs during ↵Selene ToyKeeper2021-09-081-2/+2
| | | | | | | | thermal regulation)
| * copied Q8 hwdef to LT1 so I can improve itSelene ToyKeeper2021-09-081-0/+21
| |
| * fixed outdated comment in KR4 hwdefSelene ToyKeeper2021-09-081-1/+1
| |
| * got D4Sv2 tint ramping to work, with dynamic PWM (PFM)Selene ToyKeeper2021-09-084-80/+121
| | | | | | | | | | | | | | | | | | and (maybe) thermal regulation (untested) (also broke BLF LT1 in the process; need to fix that now) Rewrote how tint ramping works, so it provides a virtual "PWM1_LVL" for other code to use, and it translates that internally into actual hardware controls. This should, in theory, allow smooth thermal regulation (gradual_tick) to work on tint-ramp lights.
| * copied k9.3 config for new d4sv2-tintrampSelene ToyKeeper2021-09-071-0/+85
| |
| * adjusted hwdef settings for tint-ramping D4Sv2Selene ToyKeeper2021-09-071-17/+25
| | | | | | | | | | (initial rev, will almost certainly need changes later)
| * copied hwdef from K9.3 for new tint-ramping D4Sv2Selene ToyKeeper2021-09-071-0/+164
| |
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 22:28:03 +0000