| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | set KR4 default floor higher at Hank's request, | Selene ToyKeeper | 2021-08-14 | 2 | -8/+8 |
| * | clarified the new level_calc calculations a bit, experimented to make sure th... | Selene ToyKeeper | 2021-08-14 | 1 | -26/+32 |
| * | calibrated KR4 jump-start-moon, may be too high on some older hardware | Selene ToyKeeper | 2021-08-12 | 2 | -2/+2 |
| * | KR4 thermal regulation no longer needs overrides, because dynamic PWM makes t... | Selene ToyKeeper | 2021-08-12 | 1 | -2/+3 |
| * | got PFM / dynamic PWM actually working on Noctigon KR4 | Selene ToyKeeper | 2021-08-12 | 8 | -33/+89 |
| * | changed Noctigon KR4 from fixed to dynamic PWM TOP value, for later use | Selene ToyKeeper | 2021-08-12 | 1 | -2/+9 |
| * | made PWM TOP value configurable at command line in level_calc.py, and added a... | Selene ToyKeeper | 2021-08-12 | 1 | -9/+70 |
| * | added a "jump start moon" option for hold-from-off, for lights with slow-acti... | Selene ToyKeeper | 2021-08-12 | 1 | -0/+13 |
| * | made blink_once() brightness configurable per build | Selene ToyKeeper | 2021-08-12 | 1 | -2/+5 |
| * | document the actual maximum for manual memory timer (~140 minutes, not 255) | Selene ToyKeeper | 2021-08-12 | 2 | -1/+6 |
| * | added Nichia 219B build for KR4 and K9.3, adjusted 219C builds, for intl-outdoor | Selene ToyKeeper | 2021-07-25 | 5 | -5/+38 |
| * | allow building only some targets, instead of always doing all | Selene ToyKeeper | 2021-07-25 | 1 | -0/+13 |
| * | summarize results at end of batch build process | Selene ToyKeeper | 2021-07-22 | 1 | -1/+30 |
| * | give a more useful error message when t1616 files aren't installed | Selene ToyKeeper | 2021-07-22 | 1 | -2/+11 |
| * | rewrote hybrid memory (manual memory timer) to eliminate corner cases | Selene ToyKeeper | 2021-07-11 | 1 | -15/+14 |
| * | added Emisar D18 Nichia 219 build target (same as normal but reduced FET power) | Selene ToyKeeper | 2021-07-11 | 2 | -0/+15 |
| * | set Emisar/Noctigon "219" builds to 65% FET power | Selene ToyKeeper | 2021-07-09 | 5 | -8/+20 |
| * | added missing ifdefs for compiling without USE_SIMPLE_UI | Selene ToyKeeper | 2021-05-23 | 1 | -1/+9 |
| * | oops, somehow I forgot to add this earlier... Hank's UI preferences (applies... | Selene ToyKeeper | 2021-05-13 | 1 | -0/+21 |
| * | made manual memory remember tint too, not just brightness | Selene ToyKeeper | 2021-05-07 | 5 | -17/+33 |
| * | aux LED config cleaning... | Selene ToyKeeper | 2021-04-14 | 26 | -107/+15 |
| * | config updates for Hank (Emisar / Noctigon): | Selene ToyKeeper | 2021-04-13 | 12 | -7/+11 |
| * | fixed missing ifdef for simple UI | Selene ToyKeeper | 2021-04-13 | 1 | -1/+4 |
| * | fixed wrong word in manual (turbo is in full UI only) | Selene ToyKeeper | 2021-04-13 | 1 | -1/+1 |
| * | merged gchart's Tiny1 series branch for t1616 support | Selene ToyKeeper | 2021-04-02 | 19 | -16/+849 |
| |\ |
|
| | * | re-numbered t1616 builds to reflect manufacturer better | Selene ToyKeeper | 2021-04-02 | 5 | -8/+8 |
| | * | fixed blinking aux LED on gchart-fet1-t1616 (was fast and bright, now uses 2-... | Selene ToyKeeper | 2021-04-02 | 1 | -0/+5 |
| | * | need to do some measurements sometime to determine if fast or phase-correct P... | Selene ToyKeeper | 2021-04-02 | 1 | -0/+3 |
| | * | added attiny1616 flashing instructions, and made flash-tiny1616.sh configurab... | Selene ToyKeeper | 2021-04-01 | 2 | -3/+45 |
| | * | reverted version.h back to generic original | Selene ToyKeeper | 2021-04-01 | 1 | -1/+4 |
| | * | minor formatting cleanup on t1616 hwdef files | Selene ToyKeeper | 2021-04-01 | 3 | -27/+31 |
| | * | Renamed gchart-fet1-t16 to t1616, to make it consistent with other t1616 models. | Selene ToyKeeper | 2021-04-01 | 3 | -4/+4 |
| | * | slightly reorganized declaration of PCINT to make it easier to read | Selene ToyKeeper | 2021-04-01 | 1 | -16/+10 |
| | * | touched up a bit of formatting and a note for later optimization | Selene ToyKeeper | 2021-04-01 | 2 | -4/+8 |
| | * | Added attiny1616 info to the README, and made bin/build.sh support more flexi... | Selene ToyKeeper | 2021-04-01 | 2 | -3/+31 |
| | * | merged gchart's Tiny1 series branch for tiny1616 support | Selene ToyKeeper | 2021-04-01 | 19 | -8/+758 |
| |/| |
|
| | * | Merge TKs changes from 2021-01-25 | Gabriel Hart | 2021-02-01 | 15 | -16/+492 |
| | |\
| |/
|/| |
|
| * | | updated MODELS file with missing K9.3-nofet build target | Selene ToyKeeper | 2021-01-25 | 1 | -0/+1 |
| * | | removed redundant function call, added missing comment | Selene ToyKeeper | 2021-01-25 | 2 | -4/+1 |
| * | | bug pseudo-fix: K9.3 lockout mode failed in blinking single-color mode | Selene ToyKeeper | 2021-01-25 | 2 | -0/+12 |
| * | | merged noctigon k9.3 branch | Selene ToyKeeper | 2021-01-24 | 14 | -15/+481 |
| |\ \ |
|
| | * | | noctigon k9.3: default to aux RGB rainbow mode, and automatic memory | Selene ToyKeeper | 2020-12-13 | 1 | -2/+3 |
| | * | | enabled memory timer and resetting tint after timeout on K9.3 | Selene ToyKeeper | 2020-10-22 | 3 | -2/+15 |
| | * | | nope, the pins weren't swapped... the wires on the prototype were reversed | Selene ToyKeeper | 2020-10-18 | 1 | -12/+12 |
| | * | | swapped PWM1 and PWM3 channels on K9.3, because I may have had them backward | Selene ToyKeeper | 2020-10-16 | 1 | -12/+12 |
| | * | | added K9.3-noFET build target (for models with E21A as main LEDs) | Selene ToyKeeper | 2020-10-16 | 2 | -1/+55 |
| | * | | start tint at 0 instead of 128 on lights with toggle instead of ramp | Selene ToyKeeper | 2020-10-16 | 1 | -0/+4 |
| | * | | made gradual_tick() work on K9.3 (via override), fixed strobe config, | Selene ToyKeeper | 2020-10-15 | 4 | -9/+87 |
| | * | | got K9.3 2nd LEDs working (and modified FSM to allow this sort of thing) | Selene ToyKeeper | 2020-10-14 | 6 | -2/+86 |
| | * | | configured K9.3 cfg (mostly), assigned a model number, fixed typo in hwdef | Selene ToyKeeper | 2020-10-14 | 3 | -18/+20 |
