aboutsummaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* Added special 219c build. Fixed bug with forgetting memorized brightness aft...Selene ToyKeeper2018-07-143-1/+15
* Moved "next aux LED mode" to 7 clicks instead of 14 clicks.Selene ToyKeeper2018-07-011-11/+7
* merged upstream fsm changesSelene ToyKeeper2018-07-0112-22/+63
|\
| * Added hardware profiles and build targets for Emisar D1 and D1S.Selene ToyKeeper2018-07-016-0/+28
| * Made it easier to define thermal parameters per driver type.Selene ToyKeeper2018-07-015-20/+34
* | Higher thermal elbow. This light has some decent thermal mass, and the curve...Selene ToyKeeper2018-07-011-2/+2
* | merged updates from fsm branch, applied fixes to rampingiosv3 tooSelene ToyKeeper2018-06-305-41/+81
|\|
| * Fixed bug: moon mode flickered a bit in momentary modeSelene ToyKeeper2018-06-301-10/+8
| * Fixed thermal regulation bug, where it used the wrong target to determine adj...Selene ToyKeeper2018-06-303-3/+34
| * Just in case, overheating in muggle mode triggers an immediate drop to the fl...Selene ToyKeeper2018-06-301-0/+12
| * Oops, not sure how it even compiled with this typo.Selene ToyKeeper2018-06-291-1/+1
| * Made high levels regulate down even faster. Added missing save_config() at t...Selene ToyKeeper2018-06-272-13/+14
* | Ramp down even faster on high modes. Actually save to eeprom after config mo...Selene ToyKeeper2018-06-271-1/+4
* | merged FSM upstream changesSelene ToyKeeper2018-06-277-66/+128
|\|
| * Move driver-specific ramp tables into the driver's config file.Selene ToyKeeper2018-06-276-42/+98
* | Fixed return from therm_config state, removed unused eeprom slots, reorganize...Selene ToyKeeper2018-06-271-24/+37
* | Forgot to change lockout mode exit mapping and remove off_state aux LED UI in...Selene ToyKeeper2018-06-261-32/+2
* | Mostly got Emisar UI working... I think. Not yet tested.Selene ToyKeeper2018-06-262-629/+130
* | Started removing features to match Emisar UI.Selene ToyKeeper2018-06-261-24/+19
* | Copied anduril to rampingiosv3 so I can start removing features.Selene ToyKeeper2018-06-261-0/+1753
* | re-applied D4S-specific config, got lost in the mergeSelene ToyKeeper2018-06-242-3/+26
* | merged updates from FSM branchSelene ToyKeeper2018-06-2416-314/+373
|\|
| * Refactored driver/hardware definition code to be one file per driver type.Selene ToyKeeper2018-06-2414-269/+280
| * Moved driver-specific details to separate header files.Selene ToyKeeper2018-06-245-37/+88
* | Added D4S to the build-all script.Selene ToyKeeper2018-06-241-0/+1
* | Initial D4S support for Anduril. (but only the parts which can't be public yet)Selene ToyKeeper2018-06-243-2/+43
|/
* Added script to build all supported Anduril targets.Selene ToyKeeper2018-06-245-11/+35
* Moved pseudo_rand() into its own header, and made it gather entropy from ADC ...Selene ToyKeeper2018-06-236-27/+81
* Don't auto-shutoff indicator LED when entering standby mode.Selene ToyKeeper2018-06-231-0/+1
* Made thermal response faster at high levels. Not yet tested.Selene ToyKeeper2018-06-171-2/+17
* Started adding support for aux LEDs which go out the front instead of lightin...Selene ToyKeeper2018-06-172-1/+8
* Changed halfsleep mode to TICK_DURING_STANDBY. Added blinking indicator LED ...Selene ToyKeeper2018-06-178-45/+113
* Implemented halfsleep mode.Selene ToyKeeper2018-06-175-9/+63
* Added dual-switch support (tail clicky + e-switch) to muggle mode.Selene ToyKeeper2018-06-161-8/+29
* Documented how to configure indicator LED level while off.Selene ToyKeeper2018-05-091-1/+27
* merged trunk, prep for merging backSelene ToyKeeper2018-05-082-6/+23
|\
| * Made level_calc.py support both python2.7 and python3.Selene ToyKeeper2017-10-141-6/+19
| * Added my firmware thread to the readme.Selene ToyKeeper2017-09-161-0/+4
* | Added "votive candle mode", a.k.a. candle mode timer.Selene ToyKeeper2018-05-064-56/+275
* | merged BLF GT support branchSelene ToyKeeper2018-05-015-30/+156
|\ \
| * | Added BLF GT support to Anduril.Selene ToyKeeper2018-05-011-10/+42
| * | Made voltage ADC readings work on pin7 if USE_VOLTAGE_DIVIDER is defined.Selene ToyKeeper2018-05-011-9/+39
| * | Added BLF GT 150-level ramp. Is a bit of a mess though.Selene ToyKeeper2018-05-011-11/+26
| * | Use separate voltage adjustment value for pin7 readings.Selene ToyKeeper2018-05-011-0/+4
| * | Created BLF GT driver definition.Selene ToyKeeper2018-05-011-0/+45
|/ /
* | Added missing ifdef for muggle mode behavior at boot.Selene ToyKeeper2018-05-011-0/+2
* | updated Anduril diagram based on recent UI changesSelene ToyKeeper2018-05-012-65/+223
* | Second pass at making config modes smaller. Seems much better now.Selene ToyKeeper2018-04-242-92/+69
* | First pass at refactoring config modes to save space. Also, moved all config...Selene ToyKeeper2018-04-242-87/+95
* | Converted muggle mode to a smooth ramp style. Made it remember this in eepro...Selene ToyKeeper2018-04-231-32/+126
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.