aboutsummaryrefslogtreecommitdiff
path: root/bin/level_calc.py (unfollow)
Commit message (Collapse)AuthorFilesLines
2023-07-21kludgy attempt to factor PWM rise/fall time into level_calc.pySelene ToyKeeper1-7/+38
(to reduce the ramp bumps at halfspeed / quarterspeed levels)
2022-04-28fixed level_calc.py when using --pwm with 4 args instead of 5Selene ToyKeeper1-1/+1
2021-11-13increased SP10 PWM speed as much as possible without making ramp bumpy, and ↵Selene ToyKeeper1-1/+7
made party strobe pulses much faster Reduced max PWM TOP to 3072, because 2048 wasn't enough and 4096 was more than necessary. Also, Ch1 lumens / 256 / ch2 lumens = 6, so 256 * 6 * 2 is the lowest value which allows ch1 to start at half of ch2's power. I tried 1536 initially, but it made the ramp visibly malformed at the channel boundary. However, 3072 seems about right. Implemented a non-linear PWM_TOP ramp-down in level_calc, to allow it to converge faster and reduce the number of levels with visible pulses. Added an option to keep the regulator chips on between strobe pulses, by keeping the LEDs at moon instead of turning completely off. This allows the SP10 party strobe to use much shorter, more consistent pulses.
2021-08-16fixed spurious warnings in level_calc on multi-channel lightsSelene ToyKeeper1-1/+3
(also fixed reported values being too low by a factor of channel.pwm_min)
2021-08-14clarified the new level_calc calculations a bit, experimented to make sure ↵Selene ToyKeeper1-26/+32
things are right
2021-08-12got PFM / dynamic PWM actually working on Noctigon KR4Selene ToyKeeper1-1/+1
(and also added "jump start moon" to it) (and generally finished adding dynamic PWM support to FSM)
2021-08-12made PWM TOP value configurable at command line in level_calc.py, and added ↵Selene ToyKeeper1-9/+70
a "dynamic PWM" feature (uses a different PWM TOP at each of the first N ramp levels, to increase resolution at bottom end of ramp)
2019-09-15level_calc.py: note the highest level for each channel before the next ↵Selene ToyKeeper1-0/+10
channel starts, so it'll be easier to identify the channel transition points
2019-08-28added arbitrary ramp shape powers to level_calc.py, to more easily hit ↵Selene ToyKeeper1-3/+11
specific values
2019-07-30level_calc: made it easier to change maximum PWM valueSelene ToyKeeper1-3/+5
(will need a max of 1023 soon instead of 255)
2019-07-26merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper1-0/+10
------------------------------------------------------------ revno: 457 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 22:42:50 -0600 message: make sure no thermal events are handled while off (even though it shouldn't be possible, since it only happens after 15 minutes, and the light is only awake in muggle-off mode for 1 second) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 456 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:09:58 -0600 message: don't measure temperature while asleep (fixes bug on D4 V2, where it would start flashing after 15 minutes turned off in muggle mode) (also should speed up response to battery voltage changes while asleep) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 455 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:05:56 -0600 message: made strobe brightness configurable per build target modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 454 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-07-10 10:22:44 -0600 message: made the "therm faster" code only affect ramping down, and fixed a couple minor logic issues in the thermal regulation code modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 452 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:18:25 -0600 message: fixed spelling error in D4 / D4V2 files modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 451 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:16:57 -0600 message: fixed placement of #ifdefs on reboot loop prevention modified: ToyKeeper/spaghetti-monster/fsm-main.c ------------------------------------------------------------ revno: 450 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:15:59 -0600 message: made level_calc.py also find and show the channel transition points, so I won't have to do this manually all the time modified: bin/level_calc.py ------------------------------------------------------------ revno: 449 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:31:37 -0600 message: merged from fsm branch to get factory reset function modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/anduril.txt ToyKeeper/spaghetti-monster/anduril/cfg-fw3a.h ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 448 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:40 -0600 message: started adding some ideas for later (maybe), but not currently used... ... may remove again later modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 447 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:11 -0600 message: adjusted D4 / D4v2 thermal response again; it really doesn't want to behave modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 446 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:18:06 -0600 message: made d4 ramp slightly smoother at clock speed change modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 445 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:17:40 -0600 message: improved D4S thermal response; less prone to overshooting and oscillation modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4s.h ------------------------------------------------------------ revno: 444 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:12:26 -0600 message: adjusted Emisar D4 thermal response values... (this light really doesn't want to behave thermally, so the values here don't quite get an ideal response, but they're a lot better than they were) modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 443 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:11:08 -0600 message: made anduril raise brightness slower when doing thermal regulation, made hard turbo drop only activate when it's actually at turbo modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 442 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:09:54 -0600 message: made more thermal parameters configurable... - the speed of thermal history rotation (every 1s, 2s, or 4s) - prediction strength also made minimum time between temperature warnings factor in the lowpass, so the default is 5s again instead of 7s modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 441 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:39:34 -0600 message: adjusted d4v2 ramp to hit 1x7135 exactly at level 4/7, turned off hard turbo drop because it doesn't seem to be needed any more modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 440 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:33:21 -0600 message: merged updates from fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-ff-e01.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e07-2.h renamed: ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-edc-thrower.h => ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fireflies-ui/Makefile ToyKeeper/spaghetti-monster/fireflies-ui/build-all.sh ToyKeeper/spaghetti-monster/fireflies-ui/fireflies-ui.c ToyKeeper/spaghetti-monster/fireflies-ui/meta ToyKeeper/spaghetti-monster/fsm-events.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h ------------------------------------------------------------ revno: 439 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 02:10:02 -0600 message: added D4v2-219 build for reduced power (only 75% FET) added: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2-219.h ------------------------------------------------------------ revno: 438 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:57:14 -0600 message: made MCU stay awake at boot long enough to get accurate voltage reading, sped up return-to-sleep delays, made RGB "voltage" preview mode last twice as long modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 437 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:56:18 -0600 message: sped up button release timeout slightly to reduce lag when turning off light modified: ToyKeeper/spaghetti-monster/fsm-events.h ------------------------------------------------------------ revno: 436 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-05-23 00:43:14 -0600 message: merged from fsm branch to get a bunch of recent updates modified: ... a lot of files ------------------------------------------------------------ revno: 435 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Tue 2019-05-21 14:25:28 -0600 message: no muggle mode on D4v2, by request modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 434 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-05-20 00:16:26 -0600 message: improved RGB aux LED previews for voltage mode and blinking mode modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 433 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:53:47 -0600 message: fixed D4v2 ramp shape and thermal limit modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 432 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:39:48 -0600 message: merged from lantern branch, to get newer candle mode added: ToyKeeper/spaghetti-monster/anduril/cfg-blf-lantern.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-ramping.c ToyKeeper/spaghetti-monster/fsm-ramping.h ------------------------------------------------------------ revno: 431 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:29:28 -0600 message: merged from upstream fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-fw3a-219.h modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ------------------------------------------------------------ revno: 430 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:55 -0600 message: use only red, green, and blue for voltage display... don't do color mixes modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 429 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:30 -0600 message: flash-tiny1634-fuses had a typo modified: bin/flash-tiny1634-fuses.sh ------------------------------------------------------------ revno: 428 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:03:28 -0600 message: fixed builds without sleep ticks enabled modified: ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 427 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:01:17 -0600 message: made aux LEDs turn on at boot time, instead of waiting until sleep LVP measures the battery modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 426 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:00:34 -0600 message: implemented LVP in standby mode (which allows LVP to turn off high-drain aux LEDs while asleep, and allows RGB readout to change with battery charge) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-adc.h ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 425 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:33 -0600 message: enable tenclick thermal config in D4v2 target modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 424 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:16 -0600 message: added RGB support to lockout mode, improved RGB behavior, set defaults to low because the high mode is way too bright modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 423 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 02:36:55 -0600 message: got RGB aux LED modes working -- (off, low, high, blinking) and (7 colors + rainbow + voltage) (off mode only, for now, no lockout) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 422 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:25:23 -0600 message: Turn off aux LEDs when voltage is low. They use too much power on high mode. modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 421 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:24:15 -0600 message: Calibrated D4v2 voltage. modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 420 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:48:51 -0600 message: fixed RGB aux LED low mode modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ------------------------------------------------------------ revno: 419 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:47 -0600 message: started on RGB aux LED support in Anduril, but it's just an early test right now modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 418 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:05 -0600 message: adjust ramping auto-aux-LED code to include RGB version (shut off when main LEDs are on) modified: ToyKeeper/spaghetti-monster/fsm-ramping.c ------------------------------------------------------------ revno: 417 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:33:08 -0600 message: started on tiny1634 RGB aux LED support (seems to work except for the "low" output mode) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 416 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:22:15 -0600 message: fixed D4v2 PWM speed and delay speed, fixed hardware setup reference comments modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 415 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:20:50 -0600 message: fixed attiny1634 clock speed adjustments modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 414 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 15:38:52 -0600 message: renamed SWITCH_PIN_D (pin data) to SWITCH_PORT, to match AVR manual terminology (even though the value should be PINA or PINB or PINC) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 413 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:48:10 -0600 message: added tiny1634 flashing scripts added: bin/flash-tiny1634-fuses.sh bin/flash-tiny1634.sh ------------------------------------------------------------ revno: 411 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:42:35 -0600 message: started adding tiny1634 support to FSM ... so much kludge, such need clean modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/spaghetti-monster/fsm-wdt.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 410 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:40:15 -0600 message: added D4v2-1634 config and hwdef files modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 409 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:39:24 -0600 message: made build-all.sh detect attiny type from cfg file, and use it modified: ToyKeeper/spaghetti-monster/anduril/build-all.sh ------------------------------------------------------------ revno: 403 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:14:51 -0600 message: merged updates from upstream added/modified: ... lots of files ------------------------------------------------------------ revno: 402 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:08:08 -0600 message: merged in some aux LED code updates from anduril modified: ToyKeeper/spaghetti-monster/rampingios/rampingiosv3.c ------------------------------------------------------------ revno: 401 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:23:09 -0700 message: tk-attiny.h: started adding other MCU support also removed redundant eeprom size hints modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 400 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:21:59 -0700 message: made dynamic clocking safer and more portable (uses library function instead of direct register access) (lib disables interrupts properly, which I wasn't doing) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-events.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/spaghetti-monster.h
2019-03-26added seventh-root shape to level_calc.pySelene ToyKeeper1-2/+3
2019-03-08level_calc.py: Combined log_2 and log_e into just log, because all logs have ↵Selene ToyKeeper1-4/+5
the same curve shape.
2018-09-30Made level_calc.py's ramp shape configurable from the command line, instead ↵Selene ToyKeeper1-1/+6
of having to edit the source.
2018-06-25Made it easier to change ramp shape in bin/level_calc.py .Selene ToyKeeper1-10/+13
2017-10-14Made level_calc.py support both python2.7 and python3.Selene ToyKeeper1-6/+19
Fixed bug when user specified 'FET' instead of 'fet'.
2016-09-09level_calc minor formatting fixSelene ToyKeeper1-1/+1
2016-05-22Fixed level_calc N-channel calculations to fix all errors I could find.Selene ToyKeeper1-13/+43
Fixed the case with multiple 7135 channels (they should add up). Fixed the calculation of moon mode. Fixed boundary cases, including below-zero PWM. Had to ask the user for the type (FET/7135) of each channel.
2016-05-22Made level_calc.py work with any number of power channels.Selene ToyKeeper1-96/+96
Results are slightly different than before, and I'm not sure if I broke something or fixed something. Hard to tell. Regardless, it seems to work fine.
2015-09-30made visually-linear curve function configurable in level_calc.pySelene ToyKeeper1-6/+22
2015-04-06Added dual PWM support to level_calc.py, and made it work better when run ↵Selene ToyKeeper1-12/+82
via an icon in Windows. Fixed estimation formulas to better account for high minimum modes.
2015-04-06Moved level_calc.py to bin/ since it's useful for general purposes.Selene ToyKeeper1-0/+61
Made level_calc.py prompt the user for input interactively, or get values from the command line if possible.
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 13:44:27 +0000