| Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
(also, fixed bug where a totally empty li-ion didn't get limited)
|
|
and not letting the magic smoke out of updi adapters any more (probably)
The alkaline detection might be a little too lenient though; it
could potentially fail to activate limits when the cell is completely
full or stronger than an average alkaline. One of my test cells
measured at 72 / 75, so if it was just a little stronger it'd pass...
but most alkalines I tried were in the 40 to 60 range and failed easily.
OTOH, if I make it easier to fail, it's likely to trip on normal li-ion
cells, and I don't want that.
So as a future enhancement idea, maybe it should have a smaller sag
threshold for AA and a larger threshold for li-ion. That would reduce
false negatives for AA, while still preventing false positives for li-ion.
|
|
(saving progress here so I can work on a different branch)
|
|
- new ramp
- production style config defaults (simple mode, Hank config)
- candle tuning
- fixed way-too-fast thermal regulation
(might still be a bit fast, but it's a lot better)
|
|
|
|
|
|
|
|
- fixed t1616 Vref values getting clobbered sometimes,
wrapped setting those in a #define'd function for ease and consistency
- moved some DAC definitions from hw/ to arch/ to reduce repetition
- fixed thefreeman's other builds
- switched from PWM_TOPS to PWM2_LEVELS (I'm trying to phase out _TOPS)
|
|
internal volt unit
Before this branch, `voltage` was 6 bits: Volts * 10
A couple patches ago, I upgraded it to 16 bits: 65535 * Volts / 10.24
That costs too much extra ROM on attiny85 though, for extra precision
it doesn't even use... so I switched back to an 8-bit value. It's still
more precise than before though: Volts * 40
... and battcheck displays an extra digit now, on devices with ROM for it.
... and battcheck waits a second to get a more accurate measurement
before displaying the first value. It has *much* less variation
between first and later readings now.
Also:
- got t1616 builds working again (tested fc13 and thefreeman-boost-fwaa)
- upgraded t1616 voltage and temp to 12-bit (10 bits + 4x oversampling)
- removed expensive temp conversion from t1616 ADC interrupt
- recalibrated t1616 bogomips again; runs faster after interrupt fix
- increased t1616 internal VDD measurement resolution by 36% (1.5V Vref, not 1.1V)
- fixed sloppy setting of Vref bits
I still need to test / update other t1616 builds,
and fix all the t85 + t1634 code and build targets.
|
|
This patch changes the ADC code to use two internal standard units, and
everything else must convert to these units:
- FSM Volts: centiVolts << 6 (range 0 to 10.24 V per cell)
- FSM Kelvin: Kelvin << 6 (range 0 to 1024 K)
UI-level voltage is still "Volts * 10", and temperature is still Celsius.
FSM expects functions to be provided, to convert from the hardware's
raw ADC measurements to these internal units: `voltage_raw2cooked()`
and `temp_raw2cooked()`. Defaults will be provided by arch/*.[ch] for
each MCU type, or the hwdef can make its own.
Anyway, gotta go fix all the other MCUs and builds now. :(
|
|
ADC doesn't work yet. No voltage, no temperature.
I need to do a lot of refactoring on the ADC code. :(
|
