aboutsummaryrefslogtreecommitdiff
path: root/hw (unfollow)
Commit message (Collapse)AuthorFilesLines
2023-11-30added a build target for FW3X with manually-fixed RGB aux wiringSelene ToyKeeper3-3/+21
2023-11-28fixed FW3X thermal regulationSelene ToyKeeper2-4/+7
It had no minimum thermal stepdown defined, so it used MAX_7135 by default, which was level 149/150 ... thus virtually no regulation. I also made it easier to switch between internal and external temperature sensors by just commenting out a few lines in the hwdef.h.
2023-11-28FW3X: fixed external temperature sensorSelene ToyKeeper2-7/+41
(the MCU's internal sensor works too, but external is a bit better I guess?)
2023-11-27FW3X: multiple upgrades...Selene ToyKeeper4-54/+132
- upgraded to DSM: lower lows, *much* smoother ramp - made lows more efficient with underclocking - fixed party strobe being too blurry - calibrated UI speed / bogomips multiplier - added readme to document this hardware's multiple quirks
2023-11-27fw3x: fixed swapped red+blue, fixed battery measurements, added police color ↵Selene ToyKeeper2-13/+29
strobe
2023-11-27fixed ADC on sp10-proSelene ToyKeeper1-2/+5
2023-11-27fixed ADC on attiny85 and related buildsSelene ToyKeeper3-4/+19
(also enabled smooth steps on BLF GT, but had to remove stuff to make room)
2023-11-27fixed ADC on attiny1634 and related buildsSelene ToyKeeper11-291/+49
2023-11-24more ADC / DAC / MCU progress...Selene ToyKeeper10-151/+96
- fixed t1616 Vref values getting clobbered sometimes, wrapped setting those in a #define'd function for ease and consistency - moved some DAC definitions from hw/ to arch/ to reduce repetition - fixed thefreeman's other builds - switched from PWM_TOPS to PWM2_LEVELS (I'm trying to phase out _TOPS)
2023-11-22avr32dd20-devkit: make the defaults a bit more dev friendlySelene ToyKeeper1-1/+5
(realtime voltage colors, and no simple UI by default)
2023-11-22ADC voltage: battcheck 3 digits, fixed t1616, switched back to 8-bit ↵Selene ToyKeeper4-22/+21
internal volt unit Before this branch, `voltage` was 6 bits: Volts * 10 A couple patches ago, I upgraded it to 16 bits: 65535 * Volts / 10.24 That costs too much extra ROM on attiny85 though, for extra precision it doesn't even use... so I switched back to an 8-bit value. It's still more precise than before though: Volts * 40 ... and battcheck displays an extra digit now, on devices with ROM for it. ... and battcheck waits a second to get a more accurate measurement before displaying the first value. It has *much* less variation between first and later readings now. Also: - got t1616 builds working again (tested fc13 and thefreeman-boost-fwaa) - upgraded t1616 voltage and temp to 12-bit (10 bits + 4x oversampling) - removed expensive temp conversion from t1616 ADC interrupt - recalibrated t1616 bogomips again; runs faster after interrupt fix - increased t1616 internal VDD measurement resolution by 36% (1.5V Vref, not 1.1V) - fixed sloppy setting of Vref bits I still need to test / update other t1616 builds, and fix all the t85 + t1634 code and build targets.
2023-11-21got ADC voltage+temp working on avrdd... but broke all other builds/MCUsSelene ToyKeeper2-3/+22
This patch changes the ADC code to use two internal standard units, and everything else must convert to these units: - FSM Volts: centiVolts << 6 (range 0 to 10.24 V per cell) - FSM Kelvin: Kelvin << 6 (range 0 to 1024 K) UI-level voltage is still "Volts * 10", and temperature is still Celsius. FSM expects functions to be provided, to convert from the hardware's raw ADC measurements to these internal units: `voltage_raw2cooked()` and `temp_raw2cooked()`. Defaults will be provided by arch/*.[ch] for each MCU type, or the hwdef can make its own. Anyway, gotta go fix all the other MCUs and builds now. :(
2023-11-19added *unfinished* support for avr32dd20, plus a build target for a dev kitSelene ToyKeeper5-0/+453
ADC doesn't work yet. No voltage, no temperature. I need to do a lot of refactoring on the ADC code. :(
2023-11-19thefreeman/boost*: define Vref values more explicitly without magic numbersSelene ToyKeeper4-18/+22
2023-11-19missed a "include -> HWDEF_H" conversion earlierSelene ToyKeeper1-1/+2
2023-11-10refactor checkpoint: splitting MCU-specific code into arch/$MCU.[ch]Selene ToyKeeper36-128/+54
Phew, that's a lot of changes! And there's still a lot more to do...
2023-11-05fixed intentional error, because CI build-fail test worked correctlySelene ToyKeeper1-1/+1
2023-11-05help CI detect build failuresSelene ToyKeeper1-1/+1
made 'make' and 'build-all.sh' exit with an error on fail, so CI can hopefully detect it... and added an intentional source bug to make it fail for testing purposes
2023-11-04added missing noctigon-k9.3 files hidden by an overzealous .gitignore ruleSelene ToyKeeper4-0/+4
2023-11-04@hank-*-boost: reduced ripple on low modesSelene ToyKeeper2-4/+8
by raising MCU clock speed to half at levels 2+ instead of the previous value of 1/4th speed I tried full speed too, which makes ripple much smaller and faster... but it also causes a big jump in brightness between levels 1 and 2. My lux meter shows ~350 at 1/150 or ~500 at 2/150, but at half speed it's ~650 at 2/150, and at full speed it's ~1100 at 2/150. So I went for a happy medium to balance ripple, brightness, and runtime.
2023-11-04@hank-*-boost: fixed flicker while holding button at moonSelene ToyKeeper1-0/+2
@hank-noctigon-kr4-boost, @hank-noctigon-k1-boost, @hank-noctigon-dm11-boost (0216, 0253, 0273)
2023-11-03renamed tk*.h in file contents, and deleted unused filesSelene ToyKeeper3-3/+3
2023-11-03moved ATTINY and MODEL_NUMBER into $target/arch and $target/model,Selene ToyKeeper203-187/+101
and updated other scripts and files accordingly
2023-11-03moved variant builds under their parent, like "d4-219" -> "d4/219"Selene ToyKeeper38-16/+16
2023-11-03renamed cfg.h -> anduril.h inside source filesSelene ToyKeeper51-52/+52
2023-11-03renamed cfg.h -> anduril.h so each UI can have its own cfg (part 1)Selene ToyKeeper72-0/+0
(still need to update file contents afterward, but doing it in a separate commit so git can detect renames easier)
2023-11-02got things to compile again, renamed #includesSelene ToyKeeper128-177/+177
(also modified the build scripts to work with the new file structure)
2023-11-02reorganized project files (part 1)Selene ToyKeeper133-0/+11980
(just moved files, didn't change the contents yet, and nothing will work without updating #includes and build scripts and stuff)
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.