anduril - Unnamed repository; edit this file 'description' to name the repository.

	Commit message (Collapse)	Author	Files	Lines
2023-08-03	converted all K9.3 builds and D4Sv2-tintramp-fet (now emisar-2ch-fet)	Selene ToyKeeper	1	-164/+0
	to multi-channel, and removed old K9.3 builds which aren't relevant any more, and old D4Sv2-tintramp builds
2023-04-17	switched the rest of FSM + Anduril to use SPDX license headers	Selene ToyKeeper	1	-5/+5
	instead of full GPL headers (or all too often, nothing at all) There are a few "FIXME" entries where I'm not sure about the correct copyright.
2020-10-18	nope, the pins weren't swapped... the wires on the prototype were reversed	Selene ToyKeeper	1	-12/+12
	(code was correct before, but the test hardware was wrong)
2020-10-16	swapped PWM1 and PWM3 channels on K9.3, because I may have had them backward	Selene ToyKeeper	1	-12/+12

2020-10-14	got K9.3 2nd LEDs working (and modified FSM to allow this sort of thing)	Selene ToyKeeper	1	-1/+1
	added a way to include per-model code overrides added an override mechanism for logic inside set_level() wrote K9.3's set_level() function added TINT_RAMP_TOGGLE_ONLY mode for tint ramping
2020-10-14	configured K9.3 cfg (mostly), assigned a model number, fixed typo in hwdef	Selene ToyKeeper	1	-2/+2
	(main LEDs work now; 2nd LEDs not yet) (aux and button LEDs work too, plus switch)
2020-10-14	configured K9.3 hwdef	Selene ToyKeeper	1	-34/+48

2020-10-14	copied KR4 hwdef to K9.3	Selene ToyKeeper	1	-0/+0

2020-07-08	minor formatting cleanup	Selene ToyKeeper	1	-2/+1

2020-07-08	added Emisar D4v2.5 support (D4v2 with a KR4 driver, same as KR4 but with ↵	Selene ToyKeeper	1	-3/+9
	lighted button indicator LED support)
2020-04-29	removed unused TEMP_CHANNEL thing from FSM-related code	Selene ToyKeeper	1	-2/+0

2020-04-26	applied ADC rewrite updates to most recent build targets	Selene ToyKeeper	1	-1/+1

2020-03-06	fixed the ADC channel for voltage measurement	Selene ToyKeeper	1	-2/+2

2020-03-06	KR4: added FET channel, measured output, calibrated ramp	Selene ToyKeeper	1	-3/+3

2020-03-05	initial support for Noctigon KR4	Selene ToyKeeper	1	-20/+31
	(not complete, but far enough that it installs and runs) New hardware support features: - allow using PCINT other than 0 (PCINT1, PCINT2, etc) - option to ignore voltage ADC while the button is pressed (because my prototype shorts the voltage divider to 0 while the button is down)
2019-11-25	renamed Emisar D1S V2 -> Noctigon K1	Selene ToyKeeper	1	-3/+4

2019-11-25	calibrated Noctigon K1, changed voltage divider calibration values to 10-bit ↵	Selene ToyKeeper	1	-2/+4
	(was 8-bit before)
2019-09-28	remapped D1S V2 pins to match new driver	Selene ToyKeeper	1	-16/+16
	(and changed a bit about how ADC / DIDR definitions work, since this now uses DIDR1 instead of DIDR0)
2019-08-06	un-hardcoded 255 as the highest PWM level, and used a "PWM_TOP" value instead	Selene ToyKeeper	1	-0/+1
	(should make gradual adjustments work better on devices with more than 8 bits of PWM resolution)
2019-08-05	fixed voltage measurement on D1S v2	Selene ToyKeeper	1	-3/+21

2019-07-30	fsm-ramping: turn opamp chip on and off automatically based on ramp level	Selene ToyKeeper	1	-1/+2

2019-07-30	added an early version of Emisar D1S v2 hwdef and cfg files	Selene ToyKeeper	1	-0/+113
	(it compiles, but most likely doesn't actually work because it's far from finished)