aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Collapse)AuthorFilesLines
2019-05-22Fixed blip in PL47-219 rampSelene ToyKeeper1-0/+2
2019-05-15Fixed an off-by-one error in lightning mode.Selene ToyKeeper1-1/+1
Actual range was 2 to 143, but should have been 2 to 150.
2019-05-14the lantern middle-tint power correction factor wasn't quite right...Selene ToyKeeper1-1/+1
... so I adjusted it to make the result closer to a flat curve
2019-05-14added tint ramping power correction for middle tintsSelene ToyKeeper2-6/+18
(it actually needs a surprisingly large correction factor)
2019-05-14moved triangle_wave into fsm-misc, because I need it for power correction in ↵Selene ToyKeeper3-6/+16
tint ramping
2019-05-14fixed bug where click-click-hold from off to strobes would also activate ↵Selene ToyKeeper1-2/+17
tint ramping when it shouldn't
2019-05-14added auto-tint modes, refactored some indicator blinks into "blip()", ↵Selene ToyKeeper3-43/+57
enabled blink at ceiling for lantern
2019-05-13made tint ramping blink at ends of ramp, made lantern default to stepped ↵Selene ToyKeeper2-4/+17
mode, lowered lantern floor, made beacon blink shorter
2019-05-10Increased default candle magnitude to better fit recent changesSelene ToyKeeper1-1/+1
(but it still uses less power than the old version, despite the larger amplitude, because it has more of a low bias now)
2019-05-10reworked candle mode a bit more, now specifies the amplitude of each wave in ↵Selene ToyKeeper2-13/+17
percent, with a higher potential brightness but more of a low bias overall (looks good on the lantern; haven't tried it elsewhere yet)
2019-05-10made candle mode amplitude configurable at compile time,Selene ToyKeeper2-11/+19
and increased the magnitude for the lantern build
2019-05-07added a FAQ about muggle mode stepping downSelene ToyKeeper1-0/+3
2019-04-24Make sure turbo still has the 7135 chips on, since it's not 100% FET in this ↵Selene ToyKeeper1-0/+4
case.
2019-04-24added FW3A-219 build target, with FET levels limited to 50% powerSelene ToyKeeper1-0/+5
2019-03-29fixed bug: hold-from-off then release and hold failed in stepped rampSelene ToyKeeper1-3/+7
(was necessary to wait 1 second before it'd ramp the right way) (reported by maukka)
2019-03-26updated D18 config to 03-21 versionSelene ToyKeeper1-12/+12
2019-03-26tweaked D18 ramp (03-18a version)Selene ToyKeeper1-2/+2
2019-03-18adjusted Emisar D18 ramp shape and other config optionsSelene ToyKeeper1-13/+21
2019-03-18made mid-ramp blinks more configurable per build targetSelene ToyKeeper6-29/+66
(allows for 1 or 2 mid-ramp blinks, at arbitrary levels, but it defaults to the old behavior at power channel boundaries) also merged anduril updates into rampingios
2019-03-18added Emisar D18 config (not final)Selene ToyKeeper1-0/+38
2019-03-18Made default level configurable per build target, made moon hint blip a bit ↵Selene ToyKeeper1-2/+5
more noticeable.
2019-03-12configured Fireflies-EDC-Thrower discrete ramp better, updated meta infoSelene ToyKeeper1-2/+2
2019-03-12don't use eeprom for ramp config if ramp config isn't enabledSelene ToyKeeper2-0/+4
2019-03-12merged anduril updates into rampingiosSelene ToyKeeper3-13/+76
2019-03-12merged anduril refactor changes into fireflies-uiSelene ToyKeeper1-237/+288
2019-03-12fixed build error when only one of the two main strobes was enabledSelene ToyKeeper1-2/+8
2019-03-12anduril: refactored pretty much all the blinky code, to put inner loops in ↵Selene ToyKeeper1-237/+282
their own functions (because it keeps the code cleaner) (also moved candle mode to its own pseudo-state, even though it cost about 24 bytes, because the code for strobe state was really messy with candle mode intertwined)
2019-03-12merged some (most) of ffui's changes back into andurilSelene ToyKeeper2-9/+171
2019-03-12first working rev of Fireflies UI, with changes basically as minimal as possibleSelene ToyKeeper1-21/+176
from Anduril to make it easier to keep the two in sync later - changed name - changed default config file - disabled ramp config - disabled muggle mode - disabled entire strobe group - disabled goodnight and beacon mode - made battcheck group only one mode, not a group - added boring strobe group (police strobe, SOS) - changed "7 clicks from off" to tempcheck mode - added "10 clicks from off" for thermal config mode - made stuff able to be turned off at compile time: - beacon mode - ramp config - goodnight mode
2019-03-12config file for unnamed Fireflies EDC thrower, with spec'd valuesSelene ToyKeeper1-0/+27
2019-03-12created directory for Fireflies UISelene ToyKeeper3-0/+1976
2019-01-12Added an option for a "fancy" moon mode during lockout. 2nd click goes to ↵Selene ToyKeeper1-0/+9
the other ramp's floor level.
2019-01-12Small updates to the manual.Selene ToyKeeper1-2/+10
2019-01-09Added missing URL (oops).Selene ToyKeeper1-1/+2
2019-01-08Wrote up a basic user manual for Anduril.Selene ToyKeeper1-0/+349
2019-01-08Made Anduril UI diagram more black-and-white printer friendly.Selene ToyKeeper1-314/+592
2019-01-05applied anduril's redundant code removal to rampingiosv3Selene ToyKeeper1-3/+0
2019-01-03removed redundant clock speed lines, updated some commentsSelene ToyKeeper3-5/+2
2018-12-22copied Anduril off-to-ceiling improvement to RampingIOS V3Selene ToyKeeper1-5/+5
2018-12-22Turn off at beginning of 3rd click, not 2nd click. Makes off-to-ceiling ↵Selene ToyKeeper1-5/+5
transition smoother.
2018-12-19configured lantern stepped ramp and button LED mode, set default tint to 128 ↵Selene ToyKeeper2-2/+8
(balanced)
2018-12-18Updated the rest of the FSM interfaces to use the new config file system.Selene ToyKeeper9-92/+28
2018-12-18Reworked the config file include system so it'll include the #defined valueSelene ToyKeeper17-88/+25
instead of having to hard-code a bunch of specific recognized values.
2018-12-15Updated Anduril text file, mostly.Selene ToyKeeper2-27/+32
2018-12-14Enable fancier aux LED blinking mode on BLF Q8 and Sofirn SP36.Selene ToyKeeper2-0/+6
2018-11-19Added FF PL47-219 build target, with the FET ramp multiplied by 0.6666.Selene ToyKeeper3-0/+12
I guess it doesn't react well to high-amp cells, so this helps avoid issues.
2018-11-14added a fancier blinking mode for button/aux LEDs, enabled on D4S / Q8 / SP36Selene ToyKeeper3-0/+15
2018-11-14Made build script print the command it runs, so it'll be easier to ↵Selene ToyKeeper1-0/+1
copy/paste individual parts for single builds.
2018-11-11Made event definitions a little cleaner.Selene ToyKeeper1-32/+32
2018-11-11Updated RampingIOS V3 to new event API. Applied recent changes from Anduril ↵Selene ToyKeeper2-62/+56
too.
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.