aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Collapse)AuthorFilesLines
2019-06-04reduced size by 28 bytes and made code slightly cleaner by moving a common ↵Selene ToyKeeper1-46/+21
2-line pattern into its own function (instead of "target_level = x; set_level(x);", it does "set_level_and_therm_target(x);")
2019-06-02added compile option to configure response timing on 1-click on/off (at ↵Selene ToyKeeper1-18/+71
press, at release, or at event timeout), changed default from press-on to release-on (but release-off is funky and annoying so it's still not default)
2019-06-02enabled manual memory option by defaultSelene ToyKeeper1-3/+7
2019-06-02made button release timeout faster (384ms -> 288ms) to make light shut off ↵Selene ToyKeeper1-1/+1
sooner after 1 click
2019-05-25Added a compile-time option for manual memory.Selene ToyKeeper1-0/+39
(as opposed to the automatic memory it uses by default) 5 clicks while on: enable manual memory and save the current level 5 clicks and hold the last press: turn manual memory off, go back to automatic
2019-05-23merged recent anduril updates into fireflies-uiSelene ToyKeeper1-71/+225
2019-05-22D4S actually steps down a bit too fast, so... minimize thatSelene ToyKeeper1-1/+1
2019-05-22turned off hard turbo drop since it doesn't seem to be needed any moreSelene ToyKeeper4-7/+5
(but I haven't finished testing yet, so it's still possible it could be needed on D4)
2019-05-22made ramp-able strobe modes auto-reverse (mostly like the main ramp does)Selene ToyKeeper1-9/+45
2019-05-22enabled fancy (2-level) lockout momentary moon by defaultSelene ToyKeeper1-1/+1
2019-05-22made momentary mode also do strobesSelene ToyKeeper2-10/+46
2019-05-22Rewrote thermal regulation. Seems to be much more stable now... doesn't ↵Selene ToyKeeper4-83/+58
bounce, doesn't overshoot, doesn't lag. (at least on the lights I've tested so far... PL47-219, FF E01, MF01S)
2019-05-22Fixed blip in PL47-219 rampSelene ToyKeeper1-0/+2
2019-05-15Fixed an off-by-one error in lightning mode.Selene ToyKeeper1-1/+1
Actual range was 2 to 143, but should have been 2 to 150.
2019-05-14the lantern middle-tint power correction factor wasn't quite right...Selene ToyKeeper1-1/+1
... so I adjusted it to make the result closer to a flat curve
2019-05-14added tint ramping power correction for middle tintsSelene ToyKeeper2-6/+18
(it actually needs a surprisingly large correction factor)
2019-05-14moved triangle_wave into fsm-misc, because I need it for power correction in ↵Selene ToyKeeper3-6/+16
tint ramping
2019-05-14fixed bug where click-click-hold from off to strobes would also activate ↵Selene ToyKeeper1-2/+17
tint ramping when it shouldn't
2019-05-14added auto-tint modes, refactored some indicator blinks into "blip()", ↵Selene ToyKeeper3-43/+57
enabled blink at ceiling for lantern
2019-05-13made tint ramping blink at ends of ramp, made lantern default to stepped ↵Selene ToyKeeper2-4/+17
mode, lowered lantern floor, made beacon blink shorter
2019-05-12completely recalibrated FF E01 to match production sampleSelene ToyKeeper2-39/+40
2019-05-10Increased default candle magnitude to better fit recent changesSelene ToyKeeper1-1/+1
(but it still uses less power than the old version, despite the larger amplitude, because it has more of a low bias now)
2019-05-10reworked candle mode a bit more, now specifies the amplitude of each wave in ↵Selene ToyKeeper2-13/+17
percent, with a higher potential brightness but more of a low bias overall (looks good on the lantern; haven't tried it elsewhere yet)
2019-05-10made candle mode amplitude configurable at compile time,Selene ToyKeeper2-11/+19
and increased the magnitude for the lantern build
2019-05-10renamed ff-edc-thrower to ff-e01, now that it has a name... also, added a ↵Selene ToyKeeper3-1/+32
separate config file for it for Anduril
2019-05-07added a FAQ about muggle mode stepping downSelene ToyKeeper1-0/+3
2019-04-24Make sure turbo still has the 7135 chips on, since it's not 100% FET in this ↵Selene ToyKeeper1-0/+4
case.
2019-04-24added FW3A-219 build target, with FET levels limited to 50% powerSelene ToyKeeper1-0/+5
2019-04-14"make clean" shouldn't remove cfg files native to this directorySelene ToyKeeper1-1/+1
2019-04-14moved FF E07-2 config, since it's not for Anduril... it's mostly just for FF UISelene ToyKeeper1-0/+0
2019-04-14moved FF UI's tempcheck to 8 clicks, and re-added 7-click aux LED configurationSelene ToyKeeper1-1/+19
2019-04-14added FF E07-2 configuration with requested valuesSelene ToyKeeper1-0/+27
2019-04-14applied upstream anduril changes to fireflies-uiSelene ToyKeeper1-16/+40
2019-03-29fixed bug: hold-from-off then release and hold failed in stepped rampSelene ToyKeeper1-3/+7
(was necessary to wait 1 second before it'd ramp the right way) (reported by maukka)
2019-03-26updated D18 config to 03-21 versionSelene ToyKeeper1-12/+12
2019-03-26tweaked D18 ramp (03-18a version)Selene ToyKeeper1-2/+2
2019-03-18adjusted Emisar D18 ramp shape and other config optionsSelene ToyKeeper1-13/+21
2019-03-18made mid-ramp blinks more configurable per build targetSelene ToyKeeper6-29/+66
(allows for 1 or 2 mid-ramp blinks, at arbitrary levels, but it defaults to the old behavior at power channel boundaries) also merged anduril updates into rampingios
2019-03-18added Emisar D18 config (not final)Selene ToyKeeper1-0/+38
2019-03-18Made default level configurable per build target, made moon hint blip a bit ↵Selene ToyKeeper1-2/+5
more noticeable.
2019-03-12configured Fireflies-EDC-Thrower discrete ramp better, updated meta infoSelene ToyKeeper1-2/+2
2019-03-12don't use eeprom for ramp config if ramp config isn't enabledSelene ToyKeeper2-0/+4
2019-03-12merged anduril updates into rampingiosSelene ToyKeeper3-13/+76
2019-03-12merged anduril refactor changes into fireflies-uiSelene ToyKeeper1-237/+288
2019-03-12fixed build error when only one of the two main strobes was enabledSelene ToyKeeper1-2/+8
2019-03-12anduril: refactored pretty much all the blinky code, to put inner loops in ↵Selene ToyKeeper1-237/+282
their own functions (because it keeps the code cleaner) (also moved candle mode to its own pseudo-state, even though it cost about 24 bytes, because the code for strobe state was really messy with candle mode intertwined)
2019-03-12merged some (most) of ffui's changes back into andurilSelene ToyKeeper2-9/+171
2019-03-12first working rev of Fireflies UI, with changes basically as minimal as possibleSelene ToyKeeper1-21/+176
from Anduril to make it easier to keep the two in sync later - changed name - changed default config file - disabled ramp config - disabled muggle mode - disabled entire strobe group - disabled goodnight and beacon mode - made battcheck group only one mode, not a group - added boring strobe group (police strobe, SOS) - changed "7 clicks from off" to tempcheck mode - added "10 clicks from off" for thermal config mode - made stuff able to be turned off at compile time: - beacon mode - ramp config - goodnight mode
2019-03-12config file for unnamed Fireflies EDC thrower, with spec'd valuesSelene ToyKeeper1-0/+27
2019-03-12created directory for Fireflies UISelene ToyKeeper3-0/+1976
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.