aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Expand)AuthorFilesLines
2019-11-25increased Noctigon K1's default temperature limit to 55 CSelene ToyKeeper1-0/+4
2019-11-25calibrated Noctigon K1, changed voltage divider calibration values to 10-bit ...Selene ToyKeeper1-1/+1
2019-11-24enabled muggle mode again in all build targets, since it fits nowSelene ToyKeeper4-23/+0
2019-11-20made the button LED turn off in momentary mode, instead of staying on foreverSelene ToyKeeper1-2/+7
2019-11-20fixed unintentional wakeup right after going to sleepSelene ToyKeeper1-2/+2
2019-11-19Mateminco MF01S can fit muggle mode again, barelySelene ToyKeeper1-3/+3
2019-11-19reduced build size by a few bytesSelene ToyKeeper2-3/+3
2019-11-19the Q8 can just barely fit muggle mode againSelene ToyKeeper1-3/+3
2019-11-19enabled prevent_reboot_loop() on all builds, to reduce the impact of any pote...Selene ToyKeeper1-5/+7
2019-11-19fixed ADC cycles running 2X as fast as intendedSelene ToyKeeper1-8/+8
2019-11-19cleaned up WDT code a bit, reduced total size,Selene ToyKeeper2-29/+25
2019-11-18fixed issue where button-press-during-sleep could occasionally cause a rebootSelene ToyKeeper1-3/+7
2019-11-18added SOS mode to the BLF LT1 Lantern build, because people wanted itSelene ToyKeeper2-7/+44
2019-11-14turned off muggle mode on Q8 and MF01S, to make builds small enough againSelene ToyKeeper2-0/+11
2019-11-14oops, put voltage lowpass on the wrong D4SSelene ToyKeeper2-3/+4
2019-11-14added a lowpass filter for battery voltage measurementsSelene ToyKeeper3-37/+29
2019-11-14fixed factory reset (wasn't running interrupt logic since it's deferred now)Selene ToyKeeper3-12/+11
2019-11-14fixed ADC code; measures and behaves correctly now, and is easier to read...Selene ToyKeeper3-41/+41
2019-11-14started refactoring ADC code to split voltage and temperature into their own ...Selene ToyKeeper2-212/+226
2019-11-14refactored how interrupts work...Selene ToyKeeper10-38/+108
2019-11-13fixed some compile issues related to delay_4ms()Selene ToyKeeper3-2/+2
2019-10-02made lantern's muggle mode brighter (matches default stepped ramp level 4 of 5)Selene ToyKeeper1-0/+3
2019-10-02added a default version.h for people who don't use the build scriptSelene ToyKeeper1-0/+4
2019-09-28after safety ramp-down, if the button remains stuck, lock the lightSelene ToyKeeper1-1/+9
2019-09-28remapped D1S V2 pins to match new driverSelene ToyKeeper1-2/+2
2019-09-24added a version check function on 15+ clicks from off, added a safety ramp-do...Selene ToyKeeper4-0/+52
2019-09-24sped up blink_digit() a little bit, because it was annoyingly slowSelene ToyKeeper1-3/+4
2019-09-24made the maximum number of clicks 15 instead of 14Selene ToyKeeper1-1/+1
2019-09-15added some ideas for stuff to do, updated the UI diagram to show the stepped ...Selene ToyKeeper3-49/+195
2019-09-07slowed down rainbow RGB mode, added a ramp-down on stuck-button for safety pu...Selene ToyKeeper1-1/+7
2019-09-06added button LED support to D4v2Selene ToyKeeper5-5/+64
2019-08-29added Emisar D4S V2 supportSelene ToyKeeper2-0/+73
2019-08-26just cleaning up some commentsSelene ToyKeeper1-7/+1
2019-08-06un-hardcoded 255 as the highest PWM level, and used a "PWM_TOP" value insteadSelene ToyKeeper2-2/+5
2019-08-06measured and adjusted D1S v2 ramp parametersSelene ToyKeeper1-2/+6
2019-08-06turn off button LED when muggle mode turns off the main LEDSelene ToyKeeper1-0/+3
2019-08-05fixed party strobe on D1S v2, set better default aux LED modes, enabled aux L...Selene ToyKeeper2-29/+49
2019-08-05fixed weird ramp behavior on D1S v2 (by trusting the compiler more)Selene ToyKeeper1-1/+4
2019-08-05merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper19-185/+645
2019-07-31mf01-mini: enable aux LED low modeSelene ToyKeeper1-3/+3
2019-07-30anduril: allow RGB LEDs to stay on (in voltage mode) while main LEDs are onSelene ToyKeeper1-15/+46
2019-07-30fsm-ramping: turn opamp chip on and off automatically based on ramp levelSelene ToyKeeper1-0/+9
2019-07-30added an early version of Emisar D1S v2 hwdef and cfg filesSelene ToyKeeper1-0/+51
2019-07-30anduril: made it possible for config files to disable underclocking at low le...Selene ToyKeeper1-1/+4
2019-07-30fsm-ramping: made it possible to change bit depth of PWM values (8-bit or 16-...Selene ToyKeeper2-36/+48
2019-07-30ensure muggle thermal step-down can't overflow or wrap aroundSelene ToyKeeper1-1/+1
2019-07-26merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper19-185/+645
2019-07-13Updated Anduril UI diagram to add all new featuresSelene ToyKeeper2-294/+688
2019-06-28added support for Mateminco MF01-MiniSelene ToyKeeper1-0/+61
2019-06-27added factory reset function to Anduril, and reboot function for FSMSelene ToyKeeper5-3/+106
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-29 22:48:37 +0000