aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Collapse)AuthorFilesLines
2019-05-22Rewrote thermal regulation. Seems to be much more stable now... doesn't ↵Selene ToyKeeper4-83/+58
bounce, doesn't overshoot, doesn't lag. (at least on the lights I've tested so far... PL47-219, FF E01, MF01S)
2019-05-22Fixed blip in PL47-219 rampSelene ToyKeeper1-0/+2
2019-05-15Fixed an off-by-one error in lightning mode.Selene ToyKeeper1-1/+1
Actual range was 2 to 143, but should have been 2 to 150.
2019-05-14the lantern middle-tint power correction factor wasn't quite right...Selene ToyKeeper1-1/+1
... so I adjusted it to make the result closer to a flat curve
2019-05-14added tint ramping power correction for middle tintsSelene ToyKeeper2-6/+18
(it actually needs a surprisingly large correction factor)
2019-05-14moved triangle_wave into fsm-misc, because I need it for power correction in ↵Selene ToyKeeper3-6/+16
tint ramping
2019-05-14fixed bug where click-click-hold from off to strobes would also activate ↵Selene ToyKeeper1-2/+17
tint ramping when it shouldn't
2019-05-14added auto-tint modes, refactored some indicator blinks into "blip()", ↵Selene ToyKeeper3-43/+57
enabled blink at ceiling for lantern
2019-05-13made tint ramping blink at ends of ramp, made lantern default to stepped ↵Selene ToyKeeper2-4/+17
mode, lowered lantern floor, made beacon blink shorter
2019-05-10Increased default candle magnitude to better fit recent changesSelene ToyKeeper1-1/+1
(but it still uses less power than the old version, despite the larger amplitude, because it has more of a low bias now)
2019-05-10reworked candle mode a bit more, now specifies the amplitude of each wave in ↵Selene ToyKeeper2-13/+17
percent, with a higher potential brightness but more of a low bias overall (looks good on the lantern; haven't tried it elsewhere yet)
2019-05-10made candle mode amplitude configurable at compile time,Selene ToyKeeper2-11/+19
and increased the magnitude for the lantern build
2019-05-07added a FAQ about muggle mode stepping downSelene ToyKeeper1-0/+3
2019-04-24Make sure turbo still has the 7135 chips on, since it's not 100% FET in this ↵Selene ToyKeeper1-0/+4
case.
2019-04-24added FW3A-219 build target, with FET levels limited to 50% powerSelene ToyKeeper1-0/+5
2019-03-29fixed bug: hold-from-off then release and hold failed in stepped rampSelene ToyKeeper1-3/+7
(was necessary to wait 1 second before it'd ramp the right way) (reported by maukka)
2019-03-26updated D18 config to 03-21 versionSelene ToyKeeper1-12/+12
2019-03-26tweaked D18 ramp (03-18a version)Selene ToyKeeper1-2/+2
2019-03-18adjusted Emisar D18 ramp shape and other config optionsSelene ToyKeeper1-13/+21
2019-03-18made mid-ramp blinks more configurable per build targetSelene ToyKeeper6-29/+66
(allows for 1 or 2 mid-ramp blinks, at arbitrary levels, but it defaults to the old behavior at power channel boundaries) also merged anduril updates into rampingios
2019-03-18added Emisar D18 config (not final)Selene ToyKeeper1-0/+38
2019-03-18Made default level configurable per build target, made moon hint blip a bit ↵Selene ToyKeeper1-2/+5
more noticeable.
2019-03-12configured Fireflies-EDC-Thrower discrete ramp better, updated meta infoSelene ToyKeeper1-2/+2
2019-03-12don't use eeprom for ramp config if ramp config isn't enabledSelene ToyKeeper2-0/+4
2019-03-12merged anduril updates into rampingiosSelene ToyKeeper3-13/+76
2019-03-12merged anduril refactor changes into fireflies-uiSelene ToyKeeper1-237/+288
2019-03-12fixed build error when only one of the two main strobes was enabledSelene ToyKeeper1-2/+8
2019-03-12anduril: refactored pretty much all the blinky code, to put inner loops in ↵Selene ToyKeeper1-237/+282
their own functions (because it keeps the code cleaner) (also moved candle mode to its own pseudo-state, even though it cost about 24 bytes, because the code for strobe state was really messy with candle mode intertwined)
2019-03-12merged some (most) of ffui's changes back into andurilSelene ToyKeeper2-9/+171
2019-03-12first working rev of Fireflies UI, with changes basically as minimal as possibleSelene ToyKeeper1-21/+176
from Anduril to make it easier to keep the two in sync later - changed name - changed default config file - disabled ramp config - disabled muggle mode - disabled entire strobe group - disabled goodnight and beacon mode - made battcheck group only one mode, not a group - added boring strobe group (police strobe, SOS) - changed "7 clicks from off" to tempcheck mode - added "10 clicks from off" for thermal config mode - made stuff able to be turned off at compile time: - beacon mode - ramp config - goodnight mode
2019-03-12config file for unnamed Fireflies EDC thrower, with spec'd valuesSelene ToyKeeper1-0/+27
2019-03-12created directory for Fireflies UISelene ToyKeeper3-0/+1976
2019-01-12Added an option for a "fancy" moon mode during lockout. 2nd click goes to ↵Selene ToyKeeper1-0/+9
the other ramp's floor level.
2019-01-12Small updates to the manual.Selene ToyKeeper1-2/+10
2019-01-09Added missing URL (oops).Selene ToyKeeper1-1/+2
2019-01-08Wrote up a basic user manual for Anduril.Selene ToyKeeper1-0/+349
2019-01-08Made Anduril UI diagram more black-and-white printer friendly.Selene ToyKeeper1-314/+592
2019-01-05applied anduril's redundant code removal to rampingiosv3Selene ToyKeeper1-3/+0
2019-01-03removed redundant clock speed lines, updated some commentsSelene ToyKeeper3-5/+2
2018-12-22copied Anduril off-to-ceiling improvement to RampingIOS V3Selene ToyKeeper1-5/+5
2018-12-22Turn off at beginning of 3rd click, not 2nd click. Makes off-to-ceiling ↵Selene ToyKeeper1-5/+5
transition smoother.
2018-12-19configured lantern stepped ramp and button LED mode, set default tint to 128 ↵Selene ToyKeeper2-2/+8
(balanced)
2018-12-18Updated the rest of the FSM interfaces to use the new config file system.Selene ToyKeeper9-92/+28
2018-12-18Reworked the config file include system so it'll include the #defined valueSelene ToyKeeper17-88/+25
instead of having to hard-code a bunch of specific recognized values.
2018-12-15Updated Anduril text file, mostly.Selene ToyKeeper2-27/+32
2018-12-14Enable fancier aux LED blinking mode on BLF Q8 and Sofirn SP36.Selene ToyKeeper2-0/+6
2018-11-19Added FF PL47-219 build target, with the FET ramp multiplied by 0.6666.Selene ToyKeeper3-0/+12
I guess it doesn't react well to high-amp cells, so this helps avoid issues.
2018-11-14added a fancier blinking mode for button/aux LEDs, enabled on D4S / Q8 / SP36Selene ToyKeeper3-0/+15
2018-11-14Made build script print the command it runs, so it'll be easier to ↵Selene ToyKeeper1-0/+1
copy/paste individual parts for single builds.
2018-11-11Made event definitions a little cleaner.Selene ToyKeeper1-32/+32
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-29 12:15:15 +0000