aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Collapse)AuthorFilesLines
2018-05-09Documented how to configure indicator LED level while off.Selene ToyKeeper1-1/+27
2018-05-06Added "votive candle mode", a.k.a. candle mode timer.Selene ToyKeeper4-56/+275
Off by default, but click three times to add 30m to the timer. Maximum timer length about 4.5 hours.
2018-05-01Added BLF GT support to Anduril.Selene ToyKeeper1-10/+42
2018-05-01Made voltage ADC readings work on pin7 if USE_VOLTAGE_DIVIDER is defined.Selene ToyKeeper1-9/+39
2018-05-01Added BLF GT 150-level ramp. Is a bit of a mess though.Selene ToyKeeper1-11/+26
2018-05-01Use separate voltage adjustment value for pin7 readings.Selene ToyKeeper1-0/+4
2018-05-01Added missing ifdef for muggle mode behavior at boot.Selene ToyKeeper1-0/+2
2018-05-01updated Anduril diagram based on recent UI changesSelene ToyKeeper2-65/+223
2018-04-24Second pass at making config modes smaller. Seems much better now.Selene ToyKeeper2-92/+69
2018-04-24First pass at refactoring config modes to save space. Also, moved all ↵Selene ToyKeeper2-87/+95
config menus to 4 clicks.
2018-04-23Converted muggle mode to a smooth ramp style. Made it remember this in ↵Selene ToyKeeper1-32/+126
eeprom to persist across battery changes. This uses quite a bit of extra space, so I may need to refactor something else to make more room. Also fixed a bug where ramp style could get stuck at "discrete/stepped ramp" if eeprom got corrupted.
2018-04-23Added more stuff to do.Selene ToyKeeper1-3/+9
2018-04-23Experiment: make ramp blinks configurable by blinking at every fixed-ramp ↵Selene ToyKeeper1-2/+35
step during the smooth ramp. (spoiler: it's annoying)
2018-01-25Updated Anduril UI text/diagram to match current code.Selene ToyKeeper3-439/+835
2018-01-24Minor candle mode tweaks for a better appearance.Selene ToyKeeper1-3/+3
2018-01-24Made candle mode more candle-like and more complex.Selene ToyKeeper1-7/+22
2018-01-24Anduril: Re-ordered strobe modes. Reduced compiled size a bit by caching ↵Selene ToyKeeper1-35/+49
volatile vars.
2018-01-24Anduril: Added room-temperature calibration function. Slowed down thermal ↵Selene ToyKeeper1-43/+44
regulation speed for small adjustments.
2018-01-24FSM: added ability to adjust temperature calibration in UI (lower-case ↵Selene ToyKeeper2-4/+5
therm_cal_offset var).
2018-01-24Thermal regulation adjustments...Selene ToyKeeper1-11/+29
- Don't step down lower than 1x7135 level. - Change speed of gradual adjustments based on how far it needs to go, but in all cases slower than before. (may need further adjusting) (is currently a mess, but I wanted to check it in before I tweak it further)
2018-01-24Save a few bytes by changing how PCINT is defined.Selene ToyKeeper2-2/+3
Minor comment cleaning.
2018-01-24Work around issues related to ADC interrupt auto-triggering itself.Selene ToyKeeper3-10/+20
(was firing off 1000 times faster than desired, causing several issues) (now only executes when explicitly requested by the WDT)
2018-01-04Made thermal adjustment speed change depending on how far it needs to go.Selene ToyKeeper1-5/+35
(faster for large changes, much slower for smaller changes) (actual thermal behavior not tested yet) Made lockout mode moon match the current ramp instead of using the lowest of both. Made ramp-type toggle stop doing gradual adjustments back to the previous ramp's level (I hope). Added LVP to muggle mode.
2017-12-12Debouncing finally works (at least, it does on my two test hosts).Selene ToyKeeper4-56/+25
2017-12-11Greatly improved button debouncing. Helps a lot on FW3A and my light saber.Selene ToyKeeper4-7/+57
Debouncing isn't 100% yet though.
2017-12-11Working toward a FW3A release now. Made strobes use Nx7135 (when available) ↵Selene ToyKeeper2-20/+38
instead of FET. Added some ideas. Simplified some syntax.
2017-12-03Made it possible to override address of eeprom array in RAM.Selene ToyKeeper2-0/+8
(useful when trying to use a single large data structure without wasting twice its size in RAM)
2017-11-08Added a candle flicker mode to Anduril. Easy to enable/disable at compile time.Selene ToyKeeper1-8/+85
2017-11-06Added an incredibly simple muggle mode... 1-mode, on/off only, disconnect ↵Selene ToyKeeper1-0/+59
power to exit.
2017-11-06Made FSM eeprom more atomic by writing marker byte last.Selene ToyKeeper1-1/+4
2017-10-21Moved indicator_led() from Anduril into FSM. Made it auto-set indicator ↵Selene ToyKeeper4-75/+79
level based on ramp level. Made Anduril configure voltage fudge and indicator LED functions based on driver type. Removed "ticks_spent_awake" thing since it's redundant. EV_tick arg does the same thing in fewer bytes. Rearranged some clauses in off_state to put events in a more coherent order.
2017-10-21Delay un-setting go_to_standby until the last moment, in case set_level() ↵Selene ToyKeeper1-1/+1
wants to use it.
2017-10-20Made indicator LED turn on/off in lightning mode along with main LED.Selene ToyKeeper1-0/+15
2017-10-20Er, don't save_config() every frame... wait until the user lets go of the ↵Selene ToyKeeper2-4/+7
button.
2017-10-20Added Q8 indicator LED support to Anduril.Selene ToyKeeper1-0/+77
Includes options for off/low/high during regular operation and during lockout mode (two different settings).
2017-10-06Updated more temperature bits to be 14.1 instead of 13.2.Selene ToyKeeper1-3/+3
2017-10-06Made HOLD_TIMEOUT and RELEASE_TIMEOUT define-able in the UI code.Selene ToyKeeper1-0/+4
2017-10-06Temperature is 14.1 now, now 13.2. Divide by 2 instead of 4 before display.Selene ToyKeeper1-1/+1
2017-10-01Use either full or quarter speed in nice delays, based on output level.Selene ToyKeeper1-1/+19
This fixes issues with some blinky modes being audible (particularly biking and lightning modes), without sacrificing the power savings for other blinkies (like beacon and battcheck).
2017-09-29Made dual-switch startup optionally go to moon if e-switch is held.Selene ToyKeeper1-1/+6
2017-09-29Added option to start at memorized level, for momentary use on dual-switch ↵Selene ToyKeeper3-5/+49
lights. Renamed WL versions of eeprom functions, for naming consistency.
2017-09-28Make sure hold-from-off ramps up, not down.Selene ToyKeeper1-0/+3
2017-09-28Added reversing to Anduril. Made EV_tick always send 0 while in "hold" state.Selene ToyKeeper2-5/+40
Reversing is a build-time option.
2017-09-28Rearranged some build options and made sure the build still works if some ↵Selene ToyKeeper2-11/+32
are turned off.
2017-09-28Fixed issue where double-click-from-off followed by ↵Selene ToyKeeper1-1/+0
double-click-to-true-turbo would overwrite memory with the ceiling level.
2017-09-28Fleshed out options to blink at floor, ceiling, and channel boundaries.Selene ToyKeeper1-18/+32
2017-09-28Adjusted bike flasher floor and ceiling:Selene ToyKeeper1-3/+4
- floor high enough to make sure it always blinks - ceiling can be higher than halfway up the ramp
2017-09-26Er, set the clock speed *before* going idle, not after. :)Selene ToyKeeper1-3/+4
2017-09-26Added dynamic underclocking to FSM, instead of doing it manually in Anduril.Selene ToyKeeper6-24/+63
2017-09-26Fixed moon in lockout state. Was too low since the MCU wasn't underclocked.Selene ToyKeeper1-2/+3
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-30 11:59:55 +0000