aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Expand)AuthorFilesLines
2020-08-23attempt to fix laggy voltage readings right after waking, on FW3ASelene ToyKeeper4-11/+15
2020-07-14merged Emisar D4v2.5 build targets with Noctigon KR4 build targetsSelene ToyKeeper5-133/+19
2020-07-08made lighted button go low/high based on DEFAULT_LEVEL instead of MAX_1x7135,Selene ToyKeeper4-7/+9
2020-07-08fixed D4v2.5 button LED behaviorSelene ToyKeeper1-5/+3
2020-07-08added Emisar D4v2.5 support (D4v2 with a KR4 driver, same as KR4 but with lig...Selene ToyKeeper3-0/+132
2020-06-01"SOS" is treated as one "letter" in Morse code... it's not three lettersSelene ToyKeeper1-1/+2
2020-06-01K1-SBT90.2 doesn't need party strobe slowed downSelene ToyKeeper1-1/+5
2020-05-14fixed compile error when all strobe modes are disabledSelene ToyKeeper1-0/+6
2020-05-14gave Werner's UI a simple MakefileSelene ToyKeeper1-0/+7
2020-05-14fixed builds of Werner's UI on targets which had been failing (Noctigon K1, B...Selene ToyKeeper2-3/+10
2020-05-14fixed eeprom_wl functions on attiny1634Selene ToyKeeper1-10/+10
2020-05-14fixed build of "momentary" example UISelene ToyKeeper2-2/+1
2020-05-14fixed build when USE_GOODNIGHT_MODE not enabledSelene ToyKeeper1-0/+14
2020-04-28added config which matches the spec for K1-SBT90.2, but it's not tested (ther...Selene ToyKeeper1-0/+57
2020-04-27calibrated K1 and K1-12V thermal response (smaller, slower) and candle mode (...Selene ToyKeeper2-2/+16
2020-04-27set default thermal response magnitude back to how it was before the KR4 upda...Selene ToyKeeper2-2/+3
2020-04-26applied ADC rewrite updates to most recent build targetsSelene ToyKeeper1-12/+0
2020-04-19added tweakable thermal_response_magnitude option, adjusted KR4 thermal vars,...Selene ToyKeeper2-12/+12
2020-04-19made thermal response larger when error is large, smaller when error is smallSelene ToyKeeper1-2/+8
2020-04-19KR4-noFET: made candle mode vary more since the ramp is stretched out, raised...Selene ToyKeeper1-2/+5
2020-04-19anduril: made aux RGB rainbow mode speed configurable per build targetSelene ToyKeeper1-1/+4
2020-04-13added a noFET build for D4v2, by requestSelene ToyKeeper2-1/+35
2020-04-13recalibrated timing of nice_delay_ms() based on strobe speed measurements...Selene ToyKeeper2-5/+5
2020-03-28added a Noctigon KR4 219 (75% FET) build targetSelene ToyKeeper1-0/+11
2020-03-26Noctigon KR4 needed tighter/faster thermal response, and Hank wants RGB rainb...Selene ToyKeeper1-1/+3
2020-03-26made thermal regulation use a smaller target window, and prioritize cooling moreSelene ToyKeeper1-3/+3
2020-03-22apparently the D1 can also be purchased with a D4v2 driver... so it's basica...Selene ToyKeeper1-0/+17
2020-03-21added dynamic underclocking to KR4 to increase moon runtime, fixed ramp miles...Selene ToyKeeper2-15/+11
2020-03-21fixed potential eeprom corruption after turning boost/opamp chip on/offSelene ToyKeeper1-0/+16
2020-03-20enabled soft factory reset on KR4, raised default floor to the lowest reliabl...Selene ToyKeeper2-2/+4
2020-03-20added reboot() support for tiny1634Selene ToyKeeper1-8/+10
2020-03-16removed more references to THERM_HARD_TURBO_DROPSelene ToyKeeper4-19/+0
2020-03-16removed old thermal junk and voltage_lowpass junk from cfg filesSelene ToyKeeper3-29/+0
2020-03-16fixed calc_voltage_divider() (use 10-bit calibration values, not 8-bit)Selene ToyKeeper1-1/+1
2020-03-16fixed a few things in ramping-ui, rampingiosv3, and werner's UISelene ToyKeeper3-14/+13
2020-03-16merged some misc fixes from pakutrai, cleaned up comments, removed unused sym...Selene ToyKeeper15-87/+18
2020-03-16increased blink speed slightly, and added a library function to blink out 16-...Selene ToyKeeper1-3/+25
2020-03-16added FETless KR4 build target, calibrated other KR4 therm faster level betterSelene ToyKeeper2-2/+47
2020-03-16deleted commented-out WDT code from previous revisionSelene ToyKeeper1-7/+0
2020-03-16cleaned up WDT ADC timer code slightly, and removed a bit of redundant codeSelene ToyKeeper1-6/+8
2020-03-16reduced regulation jitter by biasing errors toward zero by a constant amount,Selene ToyKeeper1-1/+14
2020-03-15the ADC sample count doesn't need to be 16-bit any more, and isn't really a c...Selene ToyKeeper2-3/+4
2020-03-15removed dead comments and dead codeSelene ToyKeeper1-28/+2
2020-03-15replaced temperature_timer (which wasn't even being used) with a variable del...Selene ToyKeeper1-27/+43
2020-03-13tried to make thermal code a bit less twitchy...Selene ToyKeeper3-13/+19
2020-03-06FET ramp was too steep; slowed it down by 50% (20 steps -> 30 steps)Selene ToyKeeper1-11/+10
2020-03-06KR4: added FET channel, measured output, calibrated rampSelene ToyKeeper1-2/+10
2020-03-05initial support for Noctigon KR4Selene ToyKeeper3-0/+76
2020-02-28went back to continuous lowpass because it had the best noise reductionSelene ToyKeeper2-52/+74
2020-02-27fixed eeprom corruption after turning boost chip on/offSelene ToyKeeper1-0/+16
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-29 16:57:08 +0000