aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Expand)AuthorFilesLines
2023-05-30synced configs between D4v2 and KR4Selene ToyKeeper2-21/+10
2023-05-30gradual adjustments: handle 0-to-255 in one step on the way up too, not just ...Selene ToyKeeper1-1/+1
2023-05-30fixed bug: regulated down on some lights when not hotSelene ToyKeeper1-1/+1
2023-05-17converted Noctigon DM11-12V build, renamed to noctigon-dm11-boostSelene ToyKeeper2-25/+28
2023-05-02post-off voltage display: use low brightness when torch was at moon level bef...Selene ToyKeeper7-12/+30
2023-05-02added Wurkkos FC13 and TS11Selene ToyKeeper3-2/+43
2023-05-02post-off voltage display was slightly too long, default to 4s, not 5sSelene ToyKeeper1-1/+1
2023-05-02RGB buttons: while torch is on, use low mode below a configured levelSelene ToyKeeper1-1/+2
2023-05-02documented post-off voltage display configSelene ToyKeeper1-57/+64
2023-05-02converted Wurkkos TS25 build...Selene ToyKeeper1-34/+45
2023-05-02D4v2: added the rest of the aux RGB colors as channel modes,Selene ToyKeeper3-3/+26
2023-05-02made "post-off voltage display" user-configurable in battcheck 7H menu item 2Selene ToyKeeper5-2/+29
2023-05-02fixed bug: channel change could stick when activating a config menu from batt...Selene ToyKeeper1-1/+15
2023-05-02documented ramp 6C, ramp 4H, lockout 3H, and battcheck 3CSelene ToyKeeper1-2/+15
2023-05-02added ability to set channel mode for number readouts (batt check, temp check...Selene ToyKeeper6-5/+39
2023-05-02converted Wurkkos TS10 build (and made its ramp smoother w/ better low modes)Selene ToyKeeper3-33/+64
2023-04-30documented a couple recent changesSelene ToyKeeper1-0/+4
2023-04-29converted Emisar D4Sv2 build, and updated it to use dynamic PWMSelene ToyKeeper1-26/+48
2023-04-29converted KR4-nofet buildSelene ToyKeeper1-5/+3
2023-04-29KR4: ramp can use 8 bits, since values never go over 255Selene ToyKeeper1-0/+5
2023-04-29Noctigon KR4: updated to use new channel systemSelene ToyKeeper5-24/+42
2023-04-29just a todo note for laterSelene ToyKeeper1-0/+1
2023-04-29lockout mode: fixed manual memory timer and tint, added 3H next channel,Selene ToyKeeper1-5/+23
2023-04-28D4v2: tweaked ramp to make it smootherSelene ToyKeeper1-9/+8
2023-04-28D4v2 FET+1 model: works again, and now uses dynamic PWM (lower lows)Selene ToyKeeper3-18/+72
2023-04-28RGB aux: always preview in high mode, and show voltage during 3-second post-o...Selene ToyKeeper1-4/+7
2023-04-28changed lockout RGB aux default to blinking voltage, instead of blinking discoSelene ToyKeeper1-1/+2
2023-04-28only use 2-color strobe in tactical mode if it's on main LEDs, not auxSelene ToyKeeper1-1/+4
2023-04-27tactical mode: use police strobe by default, if it existsSelene ToyKeeper1-2/+6
2023-04-27Noctigon KR4-tintramp updated to use new channel systemSelene ToyKeeper1-4/+4
2023-04-26whitespace cleanupSelene ToyKeeper1-5/+5
2023-04-26change channel mode per config step in channel mode menuSelene ToyKeeper4-6/+34
2023-04-26made sleep voltage work on attiny1616 againSelene ToyKeeper3-6/+31
2023-04-25put RGB aux LEDs in high mode for 3 seconds after light goes to sleepSelene ToyKeeper2-2/+4
2023-04-25fixed bug behind K93_LOCKOUT_KLUDGE which could exit lockout in solid aux modeSelene ToyKeeper15-40/+16
2023-04-25updated D4Sv2-tintramp -> Emisar 2-channel build target ...Selene ToyKeeper3-13/+127
2023-04-19added stepped tint rampingSelene ToyKeeper9-52/+227
2023-04-19LT1S Pro: added white-only auto-tint mode, at gchart's requestSelene ToyKeeper1-6/+8
2023-04-17made "Ramp 3H" do momentary turbo if current channel mode has no argsSelene ToyKeeper3-16/+29
2023-04-17LT1S Pro: raised the ramp a bit; it seemed too low in the middleSelene ToyKeeper1-2/+9
2023-04-17switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper131-1319/+534
2023-04-16reduced ROM by ~600 bytes by moving all eeprom config values to a "cfg" structSelene ToyKeeper28-596/+572
2023-04-15added ability to use 2 colors in config modeSelene ToyKeeper3-49/+46
2023-04-15enable sunset timer in Extended Simple UISelene ToyKeeper1-1/+1
2023-04-15adapted smooth-sunset patch from SammysHPSelene ToyKeeper4-95/+41
2023-04-15LT1S Pro: added manual memory with a timer by default, like on SP10 ProSelene ToyKeeper1-0/+6
2023-04-15merged gcharts config updates for BLF Q8 t1616Selene ToyKeeper1-2/+11
2023-04-15added gchart's Extended Simple UI (strobes and aux config in simple mode)Selene ToyKeeper2-36/+81
2023-04-15LT1S Pro: reduced visibility of PWM by dropping the TOP values fasterSelene ToyKeeper1-9/+7
2023-04-14LT1S: added thermal regulationSelene ToyKeeper3-39/+51
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.