aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Collapse)AuthorFilesLines
2019-01-03removed redundant clock speed lines, updated some commentsSelene ToyKeeper3-5/+2
2018-12-22copied Anduril off-to-ceiling improvement to RampingIOS V3Selene ToyKeeper1-5/+5
2018-12-22Turn off at beginning of 3rd click, not 2nd click. Makes off-to-ceiling ↵Selene ToyKeeper1-5/+5
transition smoother.
2018-12-18Updated the rest of the FSM interfaces to use the new config file system.Selene ToyKeeper9-92/+28
2018-12-18Reworked the config file include system so it'll include the #defined valueSelene ToyKeeper17-88/+25
instead of having to hard-code a bunch of specific recognized values.
2018-12-15Updated Anduril text file, mostly.Selene ToyKeeper2-27/+32
2018-12-14Enable fancier aux LED blinking mode on BLF Q8 and Sofirn SP36.Selene ToyKeeper2-0/+6
2018-11-19Added FF PL47-219 build target, with the FET ramp multiplied by 0.6666.Selene ToyKeeper3-0/+12
I guess it doesn't react well to high-amp cells, so this helps avoid issues.
2018-11-14added a fancier blinking mode for button/aux LEDs, enabled on D4S / Q8 / SP36Selene ToyKeeper3-0/+15
2018-11-14Made build script print the command it runs, so it'll be easier to ↵Selene ToyKeeper1-0/+1
copy/paste individual parts for single builds.
2018-11-11Made event definitions a little cleaner.Selene ToyKeeper1-32/+32
2018-11-11Updated RampingIOS V3 to new event API. Applied recent changes from Anduril ↵Selene ToyKeeper2-62/+56
too.
2018-11-11Added a README for the Werner UI. Fixed its build script.Selene ToyKeeper2-1/+57
2018-11-11Updated most of the UIs to use the new event API.Selene ToyKeeper6-79/+78
2018-11-11Updated the documentation to reflect recent changes to the event system.Selene ToyKeeper1-39/+64
2018-11-11Fixed the sleep tick counter wrapping around to 0 instead of 32768.Selene ToyKeeper2-11/+8
2018-11-11Fixed the corner case of a button release when the previous state was ↵Selene ToyKeeper1-1/+1
already released.
2018-11-11Several fixes...Selene ToyKeeper4-50/+46
- Made momentary+lockout modes smaller and work better. - Fixed buggy timing on hold events; made ticks_since_last_event reset when it should. - Reduced ROM size by caching volatile ticks_since_last_event sometimes. - Swapped what the top Event bit means, because it makes event handlers easier to write. - Made the maximum click event keep triggering if user keeps pressing, instead of dropping everything after the limit.
2018-11-11Rewrote the event system to use a single byte for each event instead of an ↵Selene ToyKeeper7-618/+253
array of actions. Not thoroughly tested yet, not done yet, have only updated Anduril to fit, and only partially.
2018-11-10calibrated Sofirn SP36 configSelene ToyKeeper1-5/+23
2018-11-03Made it easier to override hwdef-*.h values in cfg-*.h files.Selene ToyKeeper6-22/+0
2018-11-03forgot to add the Sofirn SP36 config file earlier, oopsSelene ToyKeeper1-0/+16
2018-11-03added missing ifdef which broke per-hardware ramp lengthsSelene ToyKeeper1-0/+2
2018-11-03Applied recent updates to FSM build scripts, and added some really simple ↵Selene ToyKeeper4-2/+16
Makefiles.
2018-11-02Corrected anduril.txt with the new aux LED button mappings.Selene ToyKeeper1-2/+5
2018-10-30Adjusted FF PL47 config. Made muggle floor/ceiling configurable per config ↵Selene ToyKeeper2-3/+19
file.
2018-10-17Initial untested support for the Sofirn SP36 (like a Q8 but smaller).Selene ToyKeeper2-0/+5
2018-10-17PL47 doesn't need "low" mode for aux LED / switch LEDSelene ToyKeeper1-1/+2
2018-10-15removed more-complex baton UI (which only different by having a party strobe ↵Selene ToyKeeper2-261/+13
mode), replaced it with the simpler version (since this UI exists mostly as an example)
2018-10-15cleaned up fsm baton UI a little, added a short manualSelene ToyKeeper3-70/+103
2018-10-12Moved "off" mode's aux LED to config to "7 clicks from off".Selene ToyKeeper1-3/+30
2018-10-09applied thermal target bugfix from AndurilSelene ToyKeeper1-1/+2
2018-10-09bug fix: set thermal target to actual level, not maximum level, when doing ↵Selene ToyKeeper1-1/+2
double-click from off
2018-10-07Made second aux LED copy the behavior of the first.Selene ToyKeeper1-0/+12
(to make the PL47 switch LEDs mirror the front-facing aux LEDs)
2018-10-07Added option to skip "low" mode for aux LEDs.Selene ToyKeeper2-0/+10
Not actually used though.
2018-10-07First working PL47 build. Does aux LEDs on pin 7 but not pin 3.Selene ToyKeeper3-0/+59
2018-09-30Added ROT66 14x7135 support. Split original 7x7135 target into two.Selene ToyKeeper4-7/+33
Still acts weird at the channel boundary, and I think it's the driver, not the emitters or 7135 chips. Not sure what exactly causes it, but the aux LED board acts weird there too.
2018-09-29Applied recent Anduril updates to RampingIOS V3:Selene ToyKeeper2-5/+24
- D4-219C build target. - Moon timing hint. - Better timing consistency on hold-from-off. - Fixed bug where changing ramp style could go to the wrong brightness level.
2018-09-29Added RampingIOS V3 manual from Phil Gold.Selene ToyKeeper3-0/+1087
2018-09-29Added D4-219C build target. Cleaned up D4S definitions a little.Selene ToyKeeper5-18/+18
2018-09-29Added MOON_TIMING_HINT, made stepped ramp initial timing the same as smooth ↵Selene ToyKeeper2-1/+16
ramp. (previously, smooth ramp took 2 timeouts before ramping while stepped took 3) (now both are 2)
2018-09-29Fixed ramp style toggle going to the wrong level when at moon.Selene ToyKeeper1-1/+1
2018-09-07fixed bug: clicking MAX_CLICKS+1 times and holding the final click would ↵Selene ToyKeeper1-4/+8
hang the MCU (also, reduced ROM size)
2018-09-06merged recent updates from Anduril, removed non-Emisar build targetsSelene ToyKeeper2-16/+23
2018-09-06Enabled THERM_HARD_TURBO_DROP on Emisar D4 and FW3A.Selene ToyKeeper5-4/+25
Made sure D1/D1S/D4S aren't affected.
2018-09-06Calibrated ROT66-219b build better.Selene ToyKeeper1-8/+16
The ramp on this thing is weird, and likes to stall at channel boundaries. Also, enabled hard turbo drop, calibrated the level for that, and turned off blinking button to make room.
2018-09-06Don't attempt to regulate back up above hard turbo drop level.Selene ToyKeeper1-0/+1
(avoids sawtooth oscillations while temperature settles)
2018-09-06Adjusted ROT66-219b ramp shape to max out channels at 65, 115, and 150.Selene ToyKeeper1-22/+8
(original ROT66 code used 62/112/150, so this is pretty close)
2018-09-05made aux LED default mode configurable per hardware target,Selene ToyKeeper2-9/+18
and changed the ROT66 default to something more sensible
2018-09-05enable ROT66 aux LED blinking mode because there's enough room nowSelene ToyKeeper1-1/+1
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-29 11:09:10 +0000