| Commit message (Expand) | Author | Files | Lines |
|---|
| 2023-07-21 | converted noctigon-k1 to multi-channel | Selene ToyKeeper | 1 | -12/+30 |
| 2023-07-21 | fixed default channel mode after using factory reset with colors | Selene ToyKeeper | 1 | -5/+5 |
| 2023-07-21 | converted emisar-d4v2-nofet to multi-channel, and | Selene ToyKeeper | 1 | -15/+16 |
| 2023-07-20 | fixed ff-e01, ff-pl47, ff-pl47g2 (using new refactor) | Selene ToyKeeper | 3 | -26/+62 |
| 2023-07-20 | fixed original D4S (using new refactor) | Selene ToyKeeper | 1 | -7/+4 |
| 2023-07-20 | fixed D4Sv2 (using new refactor) | Selene ToyKeeper | 1 | -0/+4 |
| 2023-07-18 | converted Emisar D4 and BLF Q8 to multi-channel, | Selene ToyKeeper | 5 | -48/+83 |
| 2023-07-18 | lowercase'd sofirn-lt1s-pro files | Selene ToyKeeper | 1 | -1/+1 |
| 2023-07-17 | @wurkkos-*: raised default temperature limit from 45 C to 50 C, | Selene ToyKeeper | 3 | -30/+29 |
| 2023-07-17 | fixed Wurkkos builds (using new refactor) | Selene ToyKeeper | 1 | -1/+4 |
| 2023-07-16 | fixed d4v2, kr4, m44, emisar-2ch (using new refactor), | Selene ToyKeeper | 3 | -16/+29 |
| 2023-07-10 | refactored how channel modes are defined, and converted emisar-2ch build | Selene ToyKeeper | 8 | -423/+547 |
| 2023-07-08 | Partially fixed oscillating aux LED voltage colors while asleep. | Selene ToyKeeper | 3 | -12/+21 |
| 2023-07-08 | Fixed spurious voltage warnings in attiny1616 sleep mode. Fixed by SammysHP. | Selene ToyKeeper | 1 | -9/+7 |
| 2023-07-03 | added Noctigon M44 sources | Selene ToyKeeper | 1 | -0/+110 |
| 2023-06-29 | fixed KR4 thermal regulation | Selene ToyKeeper | 1 | -0/+1 |
| 2023-06-29 | Removed references to Harry Potter, | Selene ToyKeeper | 22 | -324/+324 |
| 2023-06-29 | fixed red aux blink on 1st frame of post-off voltage display | Selene ToyKeeper | 1 | -0/+1 |
| 2023-05-30 | moved definition of BLINK_ONCE_TIME to the same file as BLINK_BRIGHTNESS | Selene ToyKeeper | 2 | -6/+5 |
| 2023-05-30 | fixed aux pre-flash (thanks to wolfgirl42) | Selene ToyKeeper | 1 | -1/+1 |
| 2023-05-30 | documented new version check format | Selene ToyKeeper | 1 | -4/+7 |
| 2023-05-30 | make sure blink_digit(0) uses the same timing as the rest of the UI | Selene ToyKeeper | 1 | -1/+1 |
| 2023-05-30 | changed version check from YYYYMMDDXXXX to XXXX.YYYY-MM-DD, | Selene ToyKeeper | 4 | -9/+12 |
| 2023-05-30 | Wurkkos models: add red+blue police strobe | Selene ToyKeeper | 1 | -0/+6 |
| 2023-05-30 | synced configs between D4v2 and KR4 | Selene ToyKeeper | 2 | -21/+10 |
| 2023-05-30 | gradual adjustments: handle 0-to-255 in one step on the way up too, not just ... | Selene ToyKeeper | 1 | -1/+1 |
| 2023-05-30 | fixed bug: regulated down on some lights when not hot | Selene ToyKeeper | 1 | -1/+1 |
| 2023-05-17 | converted Noctigon DM11-12V build, renamed to noctigon-dm11-boost | Selene ToyKeeper | 2 | -25/+28 |
| 2023-05-02 | post-off voltage display: use low brightness when torch was at moon level bef... | Selene ToyKeeper | 7 | -12/+30 |
| 2023-05-02 | added Wurkkos FC13 and TS11 | Selene ToyKeeper | 3 | -2/+43 |
| 2023-05-02 | post-off voltage display was slightly too long, default to 4s, not 5s | Selene ToyKeeper | 1 | -1/+1 |
| 2023-05-02 | RGB buttons: while torch is on, use low mode below a configured level | Selene ToyKeeper | 1 | -1/+2 |
| 2023-05-02 | documented post-off voltage display config | Selene ToyKeeper | 1 | -57/+64 |
| 2023-05-02 | converted Wurkkos TS25 build... | Selene ToyKeeper | 1 | -34/+45 |
| 2023-05-02 | D4v2: added the rest of the aux RGB colors as channel modes, | Selene ToyKeeper | 3 | -3/+26 |
| 2023-05-02 | made "post-off voltage display" user-configurable in battcheck 7H menu item 2 | Selene ToyKeeper | 5 | -2/+29 |
| 2023-05-02 | fixed bug: channel change could stick when activating a config menu from batt... | Selene ToyKeeper | 1 | -1/+15 |
| 2023-05-02 | documented ramp 6C, ramp 4H, lockout 3H, and battcheck 3C | Selene ToyKeeper | 1 | -2/+15 |
| 2023-05-02 | added ability to set channel mode for number readouts (batt check, temp check... | Selene ToyKeeper | 6 | -5/+39 |
| 2023-05-02 | converted Wurkkos TS10 build (and made its ramp smoother w/ better low modes) | Selene ToyKeeper | 3 | -33/+64 |
| 2023-04-30 | documented a couple recent changes | Selene ToyKeeper | 1 | -0/+4 |
| 2023-04-29 | converted Emisar D4Sv2 build, and updated it to use dynamic PWM | Selene ToyKeeper | 1 | -26/+48 |
| 2023-04-29 | converted KR4-nofet build | Selene ToyKeeper | 1 | -5/+3 |
| 2023-04-29 | KR4: ramp can use 8 bits, since values never go over 255 | Selene ToyKeeper | 1 | -0/+5 |
| 2023-04-29 | Noctigon KR4: updated to use new channel system | Selene ToyKeeper | 5 | -24/+42 |
| 2023-04-29 | just a todo note for later | Selene ToyKeeper | 1 | -0/+1 |
| 2023-04-29 | lockout mode: fixed manual memory timer and tint, added 3H next channel, | Selene ToyKeeper | 1 | -5/+23 |
| 2023-04-28 | D4v2: tweaked ramp to make it smoother | Selene ToyKeeper | 1 | -9/+8 |
| 2023-04-28 | D4v2 FET+1 model: works again, and now uses dynamic PWM (lower lows) | Selene ToyKeeper | 3 | -18/+72 |
| 2023-04-28 | RGB aux: always preview in high mode, and show voltage during 3-second post-o... | Selene ToyKeeper | 1 | -4/+7 |
