aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Expand)AuthorFilesLines
2019-12-17fixed too-slow thermal response (was introduced in the irq-refactor branch)Selene ToyKeeper1-5/+8
2019-12-11added support for Fireflies ROT66 G2 and PL47 G2Selene ToyKeeper2-0/+109
2019-12-04added a compile-time flag to enable/disable momentary mode (suggested by Agro)Selene ToyKeeper1-1/+18
2019-12-04fixed compile errors to handle a couple USE_ flags better:Selene ToyKeeper1-2/+8
2019-12-03added a FW3A build with the FET turned off completelySelene ToyKeeper1-0/+36
2019-12-03adjusted lantern tint ramping power correction again, based on measurements o...Selene ToyKeeper1-1/+1
2019-11-29adjusted BLF Lantern (Sofirn LT1) tint ramping power correction factor to mat...Selene ToyKeeper2-1/+8
2019-11-24enabled muggle mode again in all build targets, since it fits nowSelene ToyKeeper4-23/+0
2019-11-20fixed unintentional wakeup right after going to sleepSelene ToyKeeper1-2/+2
2019-11-19Mateminco MF01S can fit muggle mode again, barelySelene ToyKeeper1-3/+3
2019-11-19reduced build size by a few bytesSelene ToyKeeper2-3/+3
2019-11-19the Q8 can just barely fit muggle mode againSelene ToyKeeper1-3/+3
2019-11-19enabled prevent_reboot_loop() on all builds, to reduce the impact of any pote...Selene ToyKeeper1-5/+7
2019-11-19fixed ADC cycles running 2X as fast as intendedSelene ToyKeeper1-8/+8
2019-11-19cleaned up WDT code a bit, reduced total size,Selene ToyKeeper2-29/+25
2019-11-18fixed issue where button-press-during-sleep could occasionally cause a rebootSelene ToyKeeper1-3/+7
2019-11-18added SOS mode to the BLF LT1 Lantern build, because people wanted itSelene ToyKeeper2-7/+44
2019-11-14turned off muggle mode on Q8 and MF01S, to make builds small enough againSelene ToyKeeper2-0/+11
2019-11-14oops, put voltage lowpass on the wrong D4SSelene ToyKeeper2-3/+4
2019-11-14added a lowpass filter for battery voltage measurementsSelene ToyKeeper3-37/+29
2019-11-14fixed factory reset (wasn't running interrupt logic since it's deferred now)Selene ToyKeeper3-12/+11
2019-11-14fixed ADC code; measures and behaves correctly now, and is easier to read...Selene ToyKeeper3-41/+41
2019-11-14started refactoring ADC code to split voltage and temperature into their own ...Selene ToyKeeper2-212/+226
2019-11-14refactored how interrupts work...Selene ToyKeeper10-38/+108
2019-11-13fixed some compile issues related to delay_4ms()Selene ToyKeeper3-2/+2
2019-10-02made lantern's muggle mode brighter (matches default stepped ramp level 4 of 5)Selene ToyKeeper1-0/+3
2019-10-02added a default version.h for people who don't use the build scriptSelene ToyKeeper1-0/+4
2019-09-28after safety ramp-down, if the button remains stuck, lock the lightSelene ToyKeeper1-1/+9
2019-09-24added a version check function on 15+ clicks from off, added a safety ramp-do...Selene ToyKeeper4-0/+52
2019-09-24sped up blink_digit() a little bit, because it was annoyingly slowSelene ToyKeeper1-3/+4
2019-09-24made the maximum number of clicks 15 instead of 14Selene ToyKeeper1-1/+1
2019-09-15added some ideas for stuff to do, updated the UI diagram to show the stepped ...Selene ToyKeeper3-49/+195
2019-09-07slowed down rainbow RGB mode, added a ramp-down on stuck-button for safety pu...Selene ToyKeeper1-1/+7
2019-09-06added button LED support to D4v2Selene ToyKeeper5-5/+64
2019-08-29added Emisar D4S V2 supportSelene ToyKeeper2-0/+73
2019-08-26just cleaning up some commentsSelene ToyKeeper1-7/+1
2019-08-05merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper19-185/+645
2019-07-31mf01-mini: enable aux LED low modeSelene ToyKeeper1-3/+3
2019-07-30ensure muggle thermal step-down can't overflow or wrap aroundSelene ToyKeeper1-1/+1
2019-07-13Updated Anduril UI diagram to add all new featuresSelene ToyKeeper2-294/+688
2019-06-28added support for Mateminco MF01-MiniSelene ToyKeeper1-0/+61
2019-06-27added factory reset function to Anduril, and reboot function for FSMSelene ToyKeeper5-3/+106
2019-06-21anduril manual: added info about manual memory, 2-level lockout, and aux LED ...Selene ToyKeeper2-4/+33
2019-06-04reduced size by 28 bytes and made code slightly cleaner by moving a common 2-...Selene ToyKeeper1-46/+21
2019-06-02added compile option to configure response timing on 1-click on/off (at press...Selene ToyKeeper1-18/+71
2019-06-02enabled manual memory option by defaultSelene ToyKeeper1-3/+7
2019-06-02made button release timeout faster (384ms -> 288ms) to make light shut off so...Selene ToyKeeper1-1/+1
2019-05-25Added a compile-time option for manual memory.Selene ToyKeeper1-0/+39
2019-05-23merged recent anduril updates into fireflies-uiSelene ToyKeeper1-71/+225
2019-05-22D4S actually steps down a bit too fast, so... minimize thatSelene ToyKeeper1-1/+1
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.