aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Expand)AuthorFilesLines
2020-09-07cleaned up cfg-fw3x-lume1.h a little:Selene ToyKeeper1-19/+9
2020-09-07adjusted Lume1 (FW3X) cfg and hwdef according to what seems right for itSelene ToyKeeper1-26/+20
2020-09-07added support for LED_ENABLE_PIN having a min/max ramp level where it turns onSelene ToyKeeper1-3/+21
2020-09-07added support for external thermal sensors in fsm-adc.cSelene ToyKeeper1-0/+14
2020-09-02imported cfg and hwdef files for lume1Selene ToyKeeper1-0/+106
2020-08-31added model numbers to each build target, and to version check functionSelene ToyKeeper39-2/+79
2020-08-31reduced size 18 bytes by removing unnecessary duplications of blink_once()Selene ToyKeeper2-5/+1
2020-08-31removed blink_confirm() because it's not used any moreSelene ToyKeeper2-2/+12
2020-08-31removed unnecessary blink_once calls, made blink_once a bit less brightSelene ToyKeeper3-4/+1
2020-08-31made manual memory work when unlocking lightSelene ToyKeeper1-0/+5
2020-08-30steps.py: fixed python3 floating-point errorSelene ToyKeeper1-1/+1
2020-08-25made text manual consistent with UI reference tableSelene ToyKeeper1-38/+54
2020-08-24set more sensible defaults for simple UI levelsSelene ToyKeeper1-2/+2
2020-08-24changed "Off 2H" to "ceil or turbo, based on simple UI active", andSelene ToyKeeper3-9/+18
2020-08-23attempt to fix laggy voltage readings right after waking, on FW3ASelene ToyKeeper4-11/+15
2020-08-20raised ceiling levels for simple UI in each build targetSelene ToyKeeper27-26/+152
2020-08-18made FF ROT66G2 and MF01-Mini build targets fit in 8192 bytes againSelene ToyKeeper2-2/+2
2020-08-18fixed auto-lock timings again, based on measurement averages of several lightsSelene ToyKeeper1-6/+6
2020-08-18fixed auto-lock timing, this time based on measurements of a D4v2 instead of ...Selene ToyKeeper1-6/+6
2020-08-18fixed timing of auto-lock function, added SLEEP_TICKS_PER_MINUTE constantsSelene ToyKeeper2-1/+14
2020-08-18shuffled functions around to make 4C lockout and 3C battcheck againSelene ToyKeeper4-40/+62
2020-08-09remapped "Off -> 2H" to momentary ceilingSelene ToyKeeper2-4/+10
2020-08-06Added a reference table to the manual, listing all button mappingsSelene ToyKeeper1-0/+77
2020-08-06many button remappings:Selene ToyKeeper5-53/+98
2020-08-05documented new Anduril2 changes in anduril-manual.txtSelene ToyKeeper1-89/+218
2020-08-05changed sunset timer unit from 10m to 5mSelene ToyKeeper2-2/+2
2020-08-05moved Simple UI actions from 8C/8H -> 10C/10H... and removed USE_TENCLICK_TH...Selene ToyKeeper11-36/+4
2020-08-05re-enabled voltage correction on D18 and ROT66G2, because it fits nowSelene ToyKeeper2-19/+1
2020-08-05organized config defaults, added some ramp options to default configSelene ToyKeeper3-18/+39
2020-08-05made lockout momentary always use lowest first, and use manual mem level on s...Selene ToyKeeper2-18/+13
2020-08-05added support for 1-step ramps in stepped ramp modeSelene ToyKeeper1-4/+11
2020-08-05made a couple actions use blink_once() instead of blip(), for better consistencySelene ToyKeeper2-3/+3
2020-08-05reduced rom 34 bytes by merging ramp-up code with ramp-down codeSelene ToyKeeper2-79/+10
2020-08-05reduced ROM 10 bytes by cleaning up blink_confirm() callsSelene ToyKeeper6-19/+21
2020-08-01fixed bug: main LEDs stayed on while setting aux LED color in lockout modeSelene ToyKeeper1-1/+1
2020-07-31removed cfg-*.THIS, added by accident a while ago... oopsSelene ToyKeeper2-118/+0
2020-07-313 build targets were too big... fixed by turning off voltage calibration mode...Selene ToyKeeper3-1/+10
2020-07-31Block the auto-lock function in Simple UI.Selene ToyKeeper1-3/+9
2020-07-31Block the sunset timer in Simple UI.Selene ToyKeeper1-0/+5
2020-07-31made Emisar D18 build fit in ROM again (it was 6 bytes over; now it's 8 bytes...Selene ToyKeeper1-1/+1
2020-07-31made simple UI's ramp configurable, and fixed bug where it wouldn't remember ...Selene ToyKeeper3-8/+23
2020-07-31added a voltage calibration / correction function, 7C from battcheck to confi...Selene ToyKeeper7-2/+64
2020-07-31fixed bug: sunset timer didn't adjust MCU clock speed at low levels,Selene ToyKeeper2-3/+6
2020-07-31added auto-lock function, mostly contributed by SammysHPSelene ToyKeeper9-5/+104
2020-07-30made ramping "bump" the sunset timer up a little if it's near the deadlineSelene ToyKeeper2-3/+11
2020-07-30fixed bug: 4H from lockout to ramp would immediately activate the sunset timerSelene ToyKeeper1-0/+3
2020-07-30fixed bug: ramp mode acted strange if ramp level was changed after turning on...Selene ToyKeeper1-0/+13
2020-07-30fixed bug where light would shut itself off immediately if sunset timer was a...Selene ToyKeeper1-0/+7
2020-07-30moved sunset bump from 3C to 4H, fixed candle sunset behavior (was overflowin...Selene ToyKeeper2-25/+28
2020-07-30replaced "goodnight / sunset mode" with sunset timer, which works in both can...Selene ToyKeeper8-130/+155
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.