aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (unfollow)
Commit message (Collapse)AuthorFilesLines
2021-05-07made manual memory remember tint too, not just brightnessSelene ToyKeeper5-17/+33
2021-05-04Update 1-Series to use 10 MHz clock and Phase Correct PWM. Add PWM ↵Gabriel Hart2-4/+5
documentation. Also clear thermal offset on factory reset instead of setting it to 21*C.
2021-04-14aux LED config cleaning...Selene ToyKeeper26-107/+15
- use fancy blinking mode by default (define USE_OLD_BLINKING_INDICATOR if old slow mode is wanted) - remove TICK_DURING_STANDBY from all cfg-*.h files because it's enabled automatically by other features anyway (autolock, memory timer) - remove STANDBY_TICK_SPEED from cfg-*.h because all the values matched the default anyway so it was redundant - set rot66 button LED to high+blinking instead of high+off (it was only "off" because it ran out of space, and that was resolved) - enabled fancier indicator by default on fireflies-ui and rampingiosv3, since its other #define clauses were removed (not sure if those older UIs still compile, but if so, it's worth at least trying not to break it)
2021-04-13config updates for Hank (Emisar / Noctigon):Selene ToyKeeper12-7/+11
- use cycling rainbow mode by default on lights with RGB LEDs (instead of voltage, because it's better for impressing new users) - use 2C turbo instead of 2C ceiling (Anduril 1 style instead of Anduril 2 style) also some other minor housekeeping... - make all K1 models use consistent rainbow cycling speed - enable auto-lock and manual memory timer on Emisar D1v2 - remove redundant RGB config on Lume1 (it had incorrect comments anyway)
2021-04-13fixed missing ifdef for simple UISelene ToyKeeper1-1/+4
2021-04-13fixed wrong word in manual (turbo is in full UI only)Selene ToyKeeper1-1/+1
2021-04-02re-numbered t1616 builds to reflect manufacturer betterSelene ToyKeeper5-8/+8
(all the Sofirn ones are pre-production builds intended to go on new Sofirn-produced hardware)
2021-04-02fixed blinking aux LED on gchart-fet1-t1616 (was fast and bright, now uses ↵Selene ToyKeeper1-0/+5
2-level heartbeat pattern)
2021-04-01reverted version.h back to generic originalSelene ToyKeeper1-1/+4
2021-04-01Renamed gchart-fet1-t16 to t1616, to make it consistent with other t1616 models.Selene ToyKeeper2-2/+2
2021-04-01slightly reorganized declaration of PCINT to make it easier to readSelene ToyKeeper1-16/+10
2021-04-01touched up a bit of formatting and a note for later optimizationSelene ToyKeeper1-4/+7
2021-02-01Add RGB Aux functionality for 1-SeriesGabriel Hart2-22/+43
2021-02-01Updated the Sofirn SP10S Anduril boardGabriel Hart2-3/+1
2021-01-25updated MODELS file with missing K9.3-nofet build targetSelene ToyKeeper1-0/+1
2021-01-25removed redundant function call, added missing commentSelene ToyKeeper2-4/+1
2021-01-25bug pseudo-fix: K9.3 lockout mode failed in blinking single-color modeSelene ToyKeeper2-0/+12
because of what appears to be compiler jank or a race condition or some other highly unusual issue (fixed by eating up extra clock cycles in the affected code path)
2021-01-12Clean up a couple unnecessary #defines in gchart fet1 config fileGabriel Hart1-8/+0
2021-01-12Add the override of ATTINY setting to 1616 for the new T1616 config filesGabriel Hart3-0/+3
2021-01-12Add hwdef for BLF Q8 with t1616 and cfg files for the Q8, Lantern, and SP36Gabriel Hart4-0/+166
2021-01-12Rename SP10Ss hwdef file to align with othersGabriel Hart1-1/+1
2021-01-12Add Sofirn SP10S (adapter) and dual-voltage logicGabriel Hart4-1/+36
2020-12-20Fix 1-Series standby tick speed, use 2C TurboGabriel Hart3-3/+6
2020-12-18Add AVR 1-Series and t1616 board and scriptsGabriel Hart9-6/+185
2020-12-13noctigon k9.3: default to aux RGB rainbow mode, and automatic memorySelene ToyKeeper1-2/+3
2020-10-22enabled memory timer and resetting tint after timeout on K9.3Selene ToyKeeper3-2/+15
(unsure if I'll keep it this way though, or if the old way was better)
2020-10-18added model number to Lume1 FW3X build targetSelene ToyKeeper2-0/+5
2020-10-18minor update to anduril-ui.png (added clarification of what "3H" means)Selene ToyKeeper2-27/+5
2020-10-16added K9.3-noFET build target (for models with E21A as main LEDs)Selene ToyKeeper2-1/+55
2020-10-16start tint at 0 instead of 128 on lights with toggle instead of rampSelene ToyKeeper1-0/+4
2020-10-16added ramp 3H -> momentary turboSelene ToyKeeper2-0/+16
2020-10-15made gradual_tick() work on K9.3 (via override), fixed strobe config,Selene ToyKeeper4-9/+87
made blink_once() more configurable (and more reliable on K9.3)
2020-10-14got K9.3 2nd LEDs working (and modified FSM to allow this sort of thing)Selene ToyKeeper5-1/+85
added a way to include per-model code overrides added an override mechanism for logic inside set_level() wrote K9.3's set_level() function added TINT_RAMP_TOGGLE_ONLY mode for tint ramping
2020-10-14configured K9.3 cfg (mostly), assigned a model number, fixed typo in hwdefSelene ToyKeeper2-16/+18
(main LEDs work now; 2nd LEDs not yet) (aux and button LEDs work too, plus switch)
2020-10-14copied KR4 cfg to K9.3 cfgSelene ToyKeeper1-0/+65
2020-10-14renamed LED_ENABLE2_* to LED2_ENABLE_*Selene ToyKeeper2-8/+8
2020-09-30improved docs, changed blinky order: Battcheck, Tempcheck, Beacon, SOSSelene ToyKeeper6-94/+127
2020-09-27fixed factory reset (forgot one line in previous commit)Selene ToyKeeper1-0/+1
2020-09-27reworked nice_delay interrupt system and fixed some old issues:Selene ToyKeeper7-37/+38
- added set_state_deferred(), to avoid timing issues when changing state in loop() (fixes bug where first button press after version check was sometimes ignored, and similar issue after battcheck in simple UI) - reduced chance of eating first button press after simple UI's battcheck, because it spent an extra second waiting after finishing the readout, and it wasn't intuitive for a single click to go from "post-battcheck darkness" to "off" during that period - made interrupt_nice_delays() happen every time the state changes, instead of having nice_delay() explicitly check for state changes while it waits... (because the explicit check was buggy and used more ROM) - made nice_delay_ms() abort immediately when interrupt is set, instead of waiting 1ms before it even checks for the interrupt condition... this makes aborted animations end a lot faster, with less visible flickering - made blink_num() smaller and simpler, because changes listed above make it possible - slightly changed order of events in main(), to accommodate for changes above - fixed issue where battcheck would keep trying to blink out numbers while the user was holding 10H for voltage config mode - ... and reduced ROM size by about 38 bytes
2020-09-27fixed bug: momentary bike mode could sometimes get stuck on for a few ↵Selene ToyKeeper1-0/+1
seconds after releasing button
2020-09-25tiny clarification in the manual about memorySelene ToyKeeper1-0/+5
(committed despite being tiny, so I can do a merge in a moment)
2020-09-25reduced temperature limit for Noctigon K1-12V, to avoid overheating the ↵Selene ToyKeeper1-2/+6
boost circuit
2020-09-25removed ROM-size reduction options from larger build targets; not needed any ↵Selene ToyKeeper3-11/+0
more
2020-09-25reduced ROM size by ~58 to ~88 bytes by making lookup tables constSelene ToyKeeper1-5/+5
patch by SammysHP and Grumsel: https://gist.github.com/SammysHP/48347a770995921444a6e91b187cb55b http://budgetlightforum.com/comment/1699350#comment-1699350
2020-09-25reduced ROM 4 bytes by rearranging thermal_config_save() logic a bitSelene ToyKeeper1-7/+6
patch is from SammysHP: https://gist.github.com/SammysHP/48347a770995921444a6e91b187cb55b
2020-09-24documentation improvements:Selene ToyKeeper6-35/+122
- moved MODELS to BRANDS - added MODELS file generated from "make models" - added version check info to manual - clarified how memory options work - fixed docs for auto-lock feature - small code comment clarifications
2020-09-24reduced ROM another 24 bytes by refactoring config-mode.cSelene ToyKeeper1-16/+4
(also fixed a corner case bug with calling savefunc() with a config step of 0 if the user has frame-perfect timing) (and a bug which could have affected later revisions, calling savefunc(0,N) when invoked via click instead of hold) Patch contributed by SammysHP: https://gist.github.com/SammysHP/78af437c6723112ddfdc6b6d6b5e3022
2020-09-24fixed bug: zero clicks in ceiling config set ceiling to nonsense valueSelene ToyKeeper1-3/+3
2020-09-24re-added features to build targets which were too big beforeSelene ToyKeeper3-4/+4
2020-09-24changed menu style and moved menus from "click" events to "hold" eventsSelene ToyKeeper11-175/+180
(also reduced ROM size by 126 bytes)
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-30 06:35:25 +0000