aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Expand)AuthorAgeFilesLines
* fixed accidental reversal of two deprecated k9.3-tintramp model numbersSelene ToyKeeper2023-08-031-2/+2
* converted all K9.3 builds and D4Sv2-tintramp-fet (now emisar-2ch-fet)Selene ToyKeeper2023-08-0310-284/+209
* converted BLF GT to multi-channelSelene ToyKeeper2023-07-231-9/+19
* converted noctigon-dm11-* builds to multi-channelSelene ToyKeeper2023-07-225-89/+66
* converted noctigon-k1 to multi-channelSelene ToyKeeper2023-07-211-12/+30
* fixed default channel mode after using factory reset with colorsSelene ToyKeeper2023-07-211-5/+5
* converted emisar-d4v2-nofet to multi-channel, andSelene ToyKeeper2023-07-211-15/+16
* fixed ff-e01, ff-pl47, ff-pl47g2 (using new refactor)Selene ToyKeeper2023-07-203-26/+62
* fixed original D4S (using new refactor)Selene ToyKeeper2023-07-201-7/+4
* fixed D4Sv2 (using new refactor)Selene ToyKeeper2023-07-201-0/+4
* converted Emisar D4 and BLF Q8 to multi-channel,Selene ToyKeeper2023-07-185-48/+83
* lowercase'd sofirn-lt1s-pro filesSelene ToyKeeper2023-07-181-1/+1
* @wurkkos-*: raised default temperature limit from 45 C to 50 C,Selene ToyKeeper2023-07-173-30/+29
* fixed Wurkkos builds (using new refactor)Selene ToyKeeper2023-07-171-1/+4
* fixed d4v2, kr4, m44, emisar-2ch (using new refactor),Selene ToyKeeper2023-07-163-16/+29
* refactored how channel modes are defined, and converted emisar-2ch buildSelene ToyKeeper2023-07-108-423/+547
* Partially fixed oscillating aux LED voltage colors while asleep.Selene ToyKeeper2023-07-083-12/+21
* Fixed spurious voltage warnings in attiny1616 sleep mode. Fixed by SammysHP.Selene ToyKeeper2023-07-081-9/+7
* added Noctigon M44 sourcesSelene ToyKeeper2023-07-031-0/+110
* fixed KR4 thermal regulationSelene ToyKeeper2023-06-291-0/+1
* Removed references to Harry Potter,Selene ToyKeeper2023-06-2922-324/+324
* fixed red aux blink on 1st frame of post-off voltage displaySelene ToyKeeper2023-06-291-0/+1
* moved definition of BLINK_ONCE_TIME to the same file as BLINK_BRIGHTNESSSelene ToyKeeper2023-05-302-6/+5
* fixed aux pre-flash (thanks to wolfgirl42)Selene ToyKeeper2023-05-301-1/+1
* documented new version check formatSelene ToyKeeper2023-05-301-4/+7
* make sure blink_digit(0) uses the same timing as the rest of the UISelene ToyKeeper2023-05-301-1/+1
* changed version check from YYYYMMDDXXXX to XXXX.YYYY-MM-DD,Selene ToyKeeper2023-05-304-9/+12
* Wurkkos models: add red+blue police strobeSelene ToyKeeper2023-05-301-0/+6
* synced configs between D4v2 and KR4Selene ToyKeeper2023-05-302-21/+10
* gradual adjustments: handle 0-to-255 in one step on the way up too, not just ...Selene ToyKeeper2023-05-301-1/+1
* fixed bug: regulated down on some lights when not hotSelene ToyKeeper2023-05-301-1/+1
* converted Noctigon DM11-12V build, renamed to noctigon-dm11-boostSelene ToyKeeper2023-05-172-25/+28
* post-off voltage display: use low brightness when torch was at moon level bef...Selene ToyKeeper2023-05-027-12/+30
* added Wurkkos FC13 and TS11Selene ToyKeeper2023-05-023-2/+43
* post-off voltage display was slightly too long, default to 4s, not 5sSelene ToyKeeper2023-05-021-1/+1
* RGB buttons: while torch is on, use low mode below a configured levelSelene ToyKeeper2023-05-021-1/+2
* documented post-off voltage display configSelene ToyKeeper2023-05-021-57/+64
* converted Wurkkos TS25 build...Selene ToyKeeper2023-05-021-34/+45
* D4v2: added the rest of the aux RGB colors as channel modes,Selene ToyKeeper2023-05-023-3/+26
* made "post-off voltage display" user-configurable in battcheck 7H menu item 2Selene ToyKeeper2023-05-025-2/+29
* fixed bug: channel change could stick when activating a config menu from batt...Selene ToyKeeper2023-05-021-1/+15
* documented ramp 6C, ramp 4H, lockout 3H, and battcheck 3CSelene ToyKeeper2023-05-021-2/+15
* added ability to set channel mode for number readouts (batt check, temp check...Selene ToyKeeper2023-05-026-5/+39
* converted Wurkkos TS10 build (and made its ramp smoother w/ better low modes)Selene ToyKeeper2023-05-023-33/+64
* documented a couple recent changesSelene ToyKeeper2023-04-301-0/+4
* converted Emisar D4Sv2 build, and updated it to use dynamic PWMSelene ToyKeeper2023-04-291-26/+48
* converted KR4-nofet buildSelene ToyKeeper2023-04-291-5/+3
* KR4: ramp can use 8 bits, since values never go over 255Selene ToyKeeper2023-04-291-0/+5
* Noctigon KR4: updated to use new channel systemSelene ToyKeeper2023-04-295-24/+42
* just a todo note for laterSelene ToyKeeper2023-04-291-0/+1
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.