aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Expand)AuthorAgeFilesLines
* converted Wurkkos TS10 build (and made its ramp smoother w/ better low modes)Selene ToyKeeper2023-05-023-33/+64
* documented a couple recent changesSelene ToyKeeper2023-04-301-0/+4
* converted Emisar D4Sv2 build, and updated it to use dynamic PWMSelene ToyKeeper2023-04-291-26/+48
* converted KR4-nofet buildSelene ToyKeeper2023-04-291-5/+3
* KR4: ramp can use 8 bits, since values never go over 255Selene ToyKeeper2023-04-291-0/+5
* Noctigon KR4: updated to use new channel systemSelene ToyKeeper2023-04-295-24/+42
* just a todo note for laterSelene ToyKeeper2023-04-291-0/+1
* lockout mode: fixed manual memory timer and tint, added 3H next channel,Selene ToyKeeper2023-04-291-5/+23
* D4v2: tweaked ramp to make it smootherSelene ToyKeeper2023-04-281-9/+8
* D4v2 FET+1 model: works again, and now uses dynamic PWM (lower lows)Selene ToyKeeper2023-04-283-18/+72
* RGB aux: always preview in high mode, and show voltage during 3-second post-o...Selene ToyKeeper2023-04-281-4/+7
* changed lockout RGB aux default to blinking voltage, instead of blinking discoSelene ToyKeeper2023-04-281-1/+2
* only use 2-color strobe in tactical mode if it's on main LEDs, not auxSelene ToyKeeper2023-04-281-1/+4
* tactical mode: use police strobe by default, if it existsSelene ToyKeeper2023-04-271-2/+6
* Noctigon KR4-tintramp updated to use new channel systemSelene ToyKeeper2023-04-271-4/+4
* whitespace cleanupSelene ToyKeeper2023-04-261-5/+5
* change channel mode per config step in channel mode menuSelene ToyKeeper2023-04-264-6/+34
* made sleep voltage work on attiny1616 againSelene ToyKeeper2023-04-263-6/+31
* put RGB aux LEDs in high mode for 3 seconds after light goes to sleepSelene ToyKeeper2023-04-252-2/+4
* fixed bug behind K93_LOCKOUT_KLUDGE which could exit lockout in solid aux modeSelene ToyKeeper2023-04-2515-40/+16
* updated D4Sv2-tintramp -> Emisar 2-channel build target ...Selene ToyKeeper2023-04-253-13/+127
* added stepped tint rampingSelene ToyKeeper2023-04-199-52/+227
* LT1S Pro: added white-only auto-tint mode, at gchart's requestSelene ToyKeeper2023-04-191-6/+8
* made "Ramp 3H" do momentary turbo if current channel mode has no argsSelene ToyKeeper2023-04-173-16/+29
* LT1S Pro: raised the ramp a bit; it seemed too low in the middleSelene ToyKeeper2023-04-171-2/+9
* switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper2023-04-17131-1319/+534
* reduced ROM by ~600 bytes by moving all eeprom config values to a "cfg" structSelene ToyKeeper2023-04-1628-596/+572
* added ability to use 2 colors in config modeSelene ToyKeeper2023-04-153-49/+46
* enable sunset timer in Extended Simple UISelene ToyKeeper2023-04-151-1/+1
* adapted smooth-sunset patch from SammysHPSelene ToyKeeper2023-04-154-95/+41
* LT1S Pro: added manual memory with a timer by default, like on SP10 ProSelene ToyKeeper2023-04-151-0/+6
* merged gcharts config updates for BLF Q8 t1616Selene ToyKeeper2023-04-151-2/+11
* added gchart's Extended Simple UI (strobes and aux config in simple mode)Selene ToyKeeper2023-04-152-36/+81
* LT1S Pro: reduced visibility of PWM by dropping the TOP values fasterSelene ToyKeeper2023-04-151-9/+7
* LT1S: added thermal regulationSelene ToyKeeper2023-04-143-39/+51
* LT1S Pro: after measuring, perhaps low aux mode is better after allSelene ToyKeeper2023-04-141-2/+10
* LT1S Pro: added dynamic PWM (much better low modes!)Selene ToyKeeper2023-04-143-20/+22
* refactor progress checkpoint ... got Sofirn LT1S Pro and Emisar D4v2 workingSelene ToyKeeper2023-04-1326-443/+811
* merging gchart's changes, part 1...Selene ToyKeeper2023-04-0710-0/+309
* added a "tactical mode" on "Off -> 6C"Selene ToyKeeper2023-03-2823-4/+239
* strobe modes: added 4C to cycle backward through strobesSelene ToyKeeper2023-03-281-0/+6
* just whitespace / commentsSelene ToyKeeper2023-03-283-4/+4
* fast-blink the aux LED in standby when battery is lowSelene ToyKeeper2023-02-105-34/+54
* fixed voltage calibration resolution on SP10 ProSelene ToyKeeper2022-10-211-2/+2
* allow supporting single-color and RGB side button in the same buildSelene ToyKeeper2022-07-297-12/+46
* added Emisar D1v2 models (old FET+7135, new linear+FET, new linear-only)Selene ToyKeeper2022-07-294-6/+52
* sp10-pro: hard reset phase while turning off, fixes shutoff bug without a delaySelene ToyKeeper2022-04-141-8/+17
* moved fuses from cfg to hwdef, renamed LED_EN/DISABLE_DELAY to LED_ON/OFF_DELAYSelene ToyKeeper2022-04-142-32/+22
* merged gchart's latest changes:Selene ToyKeeper2022-04-144-1/+92
|\
| * Created LED_DISABLE_DELAY option and enabled it for SP10 Pro to hopefully eli...Gabriel Hart2022-04-132-1/+5
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.