aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Collapse)AuthorAgeFilesLines
...
| | | * | saving state of ADC / WDT refactoring before doing more changes... what ↵Selene ToyKeeper2020-01-305-76/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | changed so far: - removed LVP lowpass and thermal regulation lowpass logic; it's probably redundant now - slowed ADC deferred logic timing to 4X per second instead of 16X, because there doesn't seem to be much reason to do it any faster - reduced thermal event rate-limit to just 1 second, for more responsive regulation - added "EV_temperature_okay" signal, to help stop adjustments at an appropriate time instead of going to far - sped up sleep LVP to one measurement every 8 seconds instead of 16, to help the aux LEDs respond to voltage changes faster (effect on standby time is negligible) - make sure the WDT doesn't set the ADC channel or counter... except in standby mode
| | | * | switched to a pseudo-rolling-average method to reduce noise, set prescaler ↵Selene ToyKeeper2020-01-301-8/+13
| | | | | | | | | | | | | | | | | | | | back to 64
| | | * | increased effective ADC resolution by switching from continuous-lowpass to ↵Selene ToyKeeper2020-01-291-64/+43
| | | | | | | | | | | | | | | | | | | | sum-of-discrete-window method
| | | * | remove truncation noise by adding 0.5 to each resultSelene ToyKeeper2020-01-291-24/+22
| | | | | | | | | | | | | | | | | | | | | | | | | (keeps stable values within ~0.46 to ~0.54 range, so truncated result has no noise)
| | | * | rewrote ADC code to use a continuous lowpass system on all measurements, to ↵Selene ToyKeeper2020-01-295-130/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | eliminate noise and maybe increase precision (thermal code still needs to be rewritten though)
| | * | | mention the maximum allowed temperature in the manualSelene ToyKeeper2020-02-031-1/+1
| | |/ /
| * | | added FETless KR4 build target, calibrated other KR4 therm faster level betterSelene ToyKeeper2020-03-162-2/+47
| | | |
| * | | FET ramp was too steep; slowed it down by 50% (20 steps -> 30 steps)Selene ToyKeeper2020-03-061-11/+10
| | | |
| * | | KR4: added FET channel, measured output, calibrated rampSelene ToyKeeper2020-03-061-2/+10
| | | |
| * | | initial support for Noctigon KR4Selene ToyKeeper2020-03-053-0/+76
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | (not complete, but far enough that it installs and runs) New hardware support features: - allow using PCINT other than 0 (PCINT1, PCINT2, etc) - option to ignore voltage ADC while the button is pressed (because my prototype shorts the voltage divider to 0 while the button is down)
* | | fixed eeprom corruption after turning boost chip on/offSelene ToyKeeper2020-02-271-0/+16
| | | | | | | | | | | | | | | (boost chip apparently makes power unstable for a few ms, so we have to wait before accessing eeprom)
* | | K1 12V needs party strobe slowed down even moreSelene ToyKeeper2020-02-261-1/+1
| | |
* | | added support for boost PMIC enable pin (K1 12V has 2 pins which need to ↵Selene ToyKeeper2020-02-251-0/+6
| | | | | | | | | | | | turn on/off for main LED output)
* | | Added template files for Noctigon K1 12V model.Selene ToyKeeper2020-02-251-0/+70
|/ /
* | merged from fsm, mostly to get thermal regulation updatesSelene ToyKeeper2019-12-177-9/+187
|\|
| * fixed too-slow thermal response (was introduced in the irq-refactor branch)Selene ToyKeeper2019-12-171-5/+8
| |
| * added support for Fireflies ROT66 G2 and PL47 G2Selene ToyKeeper2019-12-112-0/+109
| |
| * added a compile-time flag to enable/disable momentary mode (suggested by Agro)Selene ToyKeeper2019-12-041-1/+18
| |
| * fixed compile errors to handle a couple USE_ flags better:Selene ToyKeeper2019-12-041-2/+8
| | | | | | | | | | | | - beacon mode off (suggested by Agro) - tenclick shortcut on with thermal regulation off
| * added a FW3A build with the FET turned off completelySelene ToyKeeper2019-12-031-0/+36
| |
| * adjusted lantern tint ramping power correction again, based on measurements ↵Selene ToyKeeper2019-12-031-1/+1
| | | | | | | | of the previous attempt
| * adjusted BLF Lantern (Sofirn LT1) tint ramping power correction factor to ↵Selene ToyKeeper2019-11-292-1/+8
| | | | | | | | | | | | | | match production units (also made the factor configurable per build target)
* | changed voltage colors to better match Noctigon K1Selene ToyKeeper2019-11-282-5/+5
| |
* | renamed Emisar D1S V2 -> Noctigon K1Selene ToyKeeper2019-11-251-3/+4
| |
* | merged upstream fsm branchSelene ToyKeeper2019-11-259-28/+64
|\|
| * enabled muggle mode again in all build targets, since it fits nowSelene ToyKeeper2019-11-244-23/+0
| |
| * merged from upstream fsm branch to get a whole bunch of kernel-level ↵Selene ToyKeeper2019-11-2419-317/+443
| |\ | | | | | | | | | improvements
| * \ merged changes from fsm branch, including version check and stuck-button safetySelene ToyKeeper2019-10-1513-53/+391
| |\ \
| * | | slowed down rainbow RGB mode, added a ramp-down on stuck-button for safety ↵Selene ToyKeeper2019-09-071-1/+7
| | | | | | | | | | | | | | | | purposes
| * | | added button LED support to D4v2Selene ToyKeeper2019-09-065-5/+64
| | | | | | | | | | | | | | | | | | | | (in a way which doesn't break backward compatibility... ... but it really needs some refactoring to reduce code duplication)
* | | | increased Noctigon K1's default temperature limit to 55 CSelene ToyKeeper2019-11-251-0/+4
| | | |
* | | | calibrated Noctigon K1, changed voltage divider calibration values to 10-bit ↵Selene ToyKeeper2019-11-251-1/+1
| | | | | | | | | | | | | | | | (was 8-bit before)
* | | | made the button LED turn off in momentary mode, instead of staying on foreverSelene ToyKeeper2019-11-201-2/+7
| | | |
* | | | merged more updates from fsm / irq-refactor branches, finishing up previous ↵Selene ToyKeeper2019-11-209-59/+98
|\ \ \ \ | | |_|/ | |/| | | | | | changes
| * | | merged tiny fix from irq-refactor branch (fixed spurious wakeup)Selene ToyKeeper2019-11-201-2/+2
| |\ \ \
| | * | | fixed unintentional wakeup right after going to sleepSelene ToyKeeper2019-11-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | (by enabling the PCINT slightly sooner, before setting its "handled" flag)
| * | | | merged irq-refactor branch, which fixes some small but long-standing issues:Selene ToyKeeper2019-11-1916-310/+399
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - fixed occasional short/aborted frames in aux LED sleep animation - fixed rare case of bogus voltage and/or temperature values - fixed issue where nice_delay_ms() didn't work in setup() - fixed theoretical possibility of extra-noisy buttons causing a hang - fixed reboot loop which happened after any crashes - fixed issue where button press in sleep mode could occasionally crash (but the issue may have been created by this branch before being fixed by it) - reduced occasional missed button events while asleep (still seems to happen but not nearly as much) Also does some other things: - cleans up the ADC code significantly - cleans up the WDT code - adds a voltage stabilizer/lowpass option (enabled on t1634 builds) - greatly reduces time spent per interrupt, which might make a future PWM-DSM technique possible - moves most interrupt-handling logic to a non-critical code path, deferring that code until timing doesn't matter as much - sped up button state measurements - very slightly reduces power used in sleep mode
| | * | | Mateminco MF01S can fit muggle mode again, barelySelene ToyKeeper2019-11-191-3/+3
| | | | |
| | * | | reduced build size by a few bytesSelene ToyKeeper2019-11-192-3/+3
| | | | |
| | * | | the Q8 can just barely fit muggle mode againSelene ToyKeeper2019-11-191-3/+3
| | | | |
| | * | | enabled prevent_reboot_loop() on all builds, to reduce the impact of any ↵Selene ToyKeeper2019-11-191-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | potential crashes (even though I just fixed the only known bug which could trigger an unintentional reboot)
| | * | | fixed ADC cycles running 2X as fast as intendedSelene ToyKeeper2019-11-191-8/+8
| | | | |
| | * | | cleaned up WDT code a bit, reduced total size,Selene ToyKeeper2019-11-192-29/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fixed bug where ticks_since_last could have the wrong value sometimes, reduced power use in sleep mode very slightly by skipping button-handling code while asleep
| | * | | fixed issue where button-press-during-sleep could occasionally cause a rebootSelene ToyKeeper2019-11-181-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | (by turning off PCINT when the light is awake)
| * | | | added SOS mode to the BLF LT1 Lantern build, because people wanted itSelene ToyKeeper2019-11-182-7/+44
| | | | |
* | | | | merged fsm updates / irq-refactor branch, to get more stable voltage readingsSelene ToyKeeper2019-11-1422-268/+440
|\ \ \ \ \ | | |/ / / | |/| | | | | | | | | | | | | (and otherwise get recent bugfixes)
| * | | | turned off muggle mode on Q8 and MF01S, to make builds small enough againSelene ToyKeeper2019-11-142-0/+11
| | | | |
| * | | | oops, put voltage lowpass on the wrong D4SSelene ToyKeeper2019-11-142-3/+4
| | | | |
| * | | | added a lowpass filter for battery voltage measurementsSelene ToyKeeper2019-11-143-37/+29
| | | | | | | | | | | | | | | | | | | | | | | | | (but only on attiny1634 devices, since it costs a bit of space and isn't strictly necessary)
| * | | | fixed factory reset (wasn't running interrupt logic since it's deferred now)Selene ToyKeeper2019-11-143-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (also fixed issue where nice_delay_ms() was aborted during setup()) (and adjusted the timing to make factory reset similar to the speed it was before this change)
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.