aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Collapse)AuthorAgeFilesLines
* got PFM / dynamic PWM actually working on Noctigon KR4Selene ToyKeeper2021-08-126-28/+83
| | | | | | (and also added "jump start moon" to it) (and generally finished adding dynamic PWM support to FSM)
* added a "jump start moon" option for hold-from-off, for lights with ↵Selene ToyKeeper2021-08-121-0/+13
| | | | | | slow-activating circuits (briefly pulses the light at a higher level to wake up the circuit faster)
* made blink_once() brightness configurable per buildSelene ToyKeeper2021-08-121-2/+5
|
* document the actual maximum for manual memory timer (~140 minutes, not 255)Selene ToyKeeper2021-08-122-1/+6
|
* added Nichia 219B build for KR4 and K9.3, adjusted 219C builds, for intl-outdoorSelene ToyKeeper2021-07-255-5/+38
|
* allow building only some targets, instead of always doing allSelene ToyKeeper2021-07-251-0/+13
|
* summarize results at end of batch build processSelene ToyKeeper2021-07-221-1/+30
|
* rewrote hybrid memory (manual memory timer) to eliminate corner casesSelene ToyKeeper2021-07-111-15/+14
| | | | | | | | | | | | | | | | | | | | Old method: - at 1-click power-on, choose a brightness based on off-time (manual level or last-ramped level) New method: - when off longer than the timer, set last-ramped level to manual level This fixes a bug: - turn light off - wait for timer - turn light on with a shortcut to moon - turn light off - turn light on - pre-patch, light went to last-ramped level instead of manual level This change also reduces the ROM size slightly.
* added Emisar D18 Nichia 219 build target (same as normal but reduced FET power)Selene ToyKeeper2021-07-112-0/+15
|
* set Emisar/Noctigon "219" builds to 65% FET powerSelene ToyKeeper2021-07-095-8/+20
| | | | | | (was 75% or 80% before) (change requested by Emisar)
* added missing ifdefs for compiling without USE_SIMPLE_UISelene ToyKeeper2021-05-231-1/+9
| | | | | (compiles now, but isn't tested on hardware)
* oops, somehow I forgot to add this earlier... Hank's UI preferences ↵Selene ToyKeeper2021-05-131-0/+21
| | | | (applies to all Emisar / Noctigon lights)
* made manual memory remember tint too, not just brightnessSelene ToyKeeper2021-05-075-17/+33
|
* aux LED config cleaning...Selene ToyKeeper2021-04-1426-107/+15
| | | | | | | | | | | | | | | | | | | | - use fancy blinking mode by default (define USE_OLD_BLINKING_INDICATOR if old slow mode is wanted) - remove TICK_DURING_STANDBY from all cfg-*.h files because it's enabled automatically by other features anyway (autolock, memory timer) - remove STANDBY_TICK_SPEED from cfg-*.h because all the values matched the default anyway so it was redundant - set rot66 button LED to high+blinking instead of high+off (it was only "off" because it ran out of space, and that was resolved) - enabled fancier indicator by default on fireflies-ui and rampingiosv3, since its other #define clauses were removed (not sure if those older UIs still compile, but if so, it's worth at least trying not to break it)
* config updates for Hank (Emisar / Noctigon):Selene ToyKeeper2021-04-1312-7/+11
| | | | | | | | | | | | - use cycling rainbow mode by default on lights with RGB LEDs (instead of voltage, because it's better for impressing new users) - use 2C turbo instead of 2C ceiling (Anduril 1 style instead of Anduril 2 style) also some other minor housekeeping... - make all K1 models use consistent rainbow cycling speed - enable auto-lock and manual memory timer on Emisar D1v2 - remove redundant RGB config on Lume1 (it had incorrect comments anyway)
* fixed missing ifdef for simple UISelene ToyKeeper2021-04-131-1/+4
|
* fixed wrong word in manual (turbo is in full UI only)Selene ToyKeeper2021-04-131-1/+1
|
* merged gchart's Tiny1 series branch for t1616 supportSelene ToyKeeper2021-04-0212-14/+416
|\
| * re-numbered t1616 builds to reflect manufacturer betterSelene ToyKeeper2021-04-025-8/+8
| | | | | | | | | | (all the Sofirn ones are pre-production builds intended to go on new Sofirn-produced hardware)
| * fixed blinking aux LED on gchart-fet1-t1616 (was fast and bright, now uses ↵Selene ToyKeeper2021-04-021-0/+5
| | | | | | | | 2-level heartbeat pattern)
| * reverted version.h back to generic originalSelene ToyKeeper2021-04-011-1/+4
| |
| * Renamed gchart-fet1-t16 to t1616, to make it consistent with other t1616 models.Selene ToyKeeper2021-04-012-2/+2
| |
| * slightly reorganized declaration of PCINT to make it easier to readSelene ToyKeeper2021-04-011-16/+10
| |
| * touched up a bit of formatting and a note for later optimizationSelene ToyKeeper2021-04-011-4/+7
| |
| * Merge TKs changes from 2021-01-25Gabriel Hart2021-02-0113-13/+325
| |\ | |/ |/|
* | updated MODELS file with missing K9.3-nofet build targetSelene ToyKeeper2021-01-251-0/+1
| |
* | removed redundant function call, added missing commentSelene ToyKeeper2021-01-252-4/+1
| |
* | bug pseudo-fix: K9.3 lockout mode failed in blinking single-color modeSelene ToyKeeper2021-01-252-0/+12
| | | | | | | | | | | | because of what appears to be compiler jank or a race condition or some other highly unusual issue (fixed by eating up extra clock cycles in the affected code path)
* | merged noctigon k9.3 branchSelene ToyKeeper2021-01-2412-12/+314
|\ \
| * | noctigon k9.3: default to aux RGB rainbow mode, and automatic memorySelene ToyKeeper2020-12-131-2/+3
| | |
| * | enabled memory timer and resetting tint after timeout on K9.3Selene ToyKeeper2020-10-223-2/+15
| | | | | | | | | | | | | | | (unsure if I'll keep it this way though, or if the old way was better)
| * | added K9.3-noFET build target (for models with E21A as main LEDs)Selene ToyKeeper2020-10-162-1/+55
| | |
| * | start tint at 0 instead of 128 on lights with toggle instead of rampSelene ToyKeeper2020-10-161-0/+4
| | |
| * | made gradual_tick() work on K9.3 (via override), fixed strobe config,Selene ToyKeeper2020-10-154-9/+87
| | | | | | | | | | | | | | | made blink_once() more configurable (and more reliable on K9.3)
| * | got K9.3 2nd LEDs working (and modified FSM to allow this sort of thing)Selene ToyKeeper2020-10-145-1/+85
| | | | | | | | | | | | | | | | | | | | | | | | added a way to include per-model code overrides added an override mechanism for logic inside set_level() wrote K9.3's set_level() function added TINT_RAMP_TOGGLE_ONLY mode for tint ramping
| * | configured K9.3 cfg (mostly), assigned a model number, fixed typo in hwdefSelene ToyKeeper2020-10-142-16/+18
| | | | | | | | | | | | | | | | | | (main LEDs work now; 2nd LEDs not yet) (aux and button LEDs work too, plus switch)
| * | copied KR4 cfg to K9.3 cfgSelene ToyKeeper2020-10-141-0/+65
| | |
| * | renamed LED_ENABLE2_* to LED2_ENABLE_*Selene ToyKeeper2020-10-142-8/+8
| | |
| | * Add RGB Aux functionality for 1-SeriesGabriel Hart2021-02-012-22/+43
| | |
| | * Updated the Sofirn SP10S Anduril boardGabriel Hart2021-02-012-3/+1
| | |
| | * Clean up a couple unnecessary #defines in gchart fet1 config fileGabriel Hart2021-01-121-8/+0
| | |
| | * Add the override of ATTINY setting to 1616 for the new T1616 config filesGabriel Hart2021-01-123-0/+3
| | |
| | * Add hwdef for BLF Q8 with t1616 and cfg files for the Q8, Lantern, and SP36Gabriel Hart2021-01-124-0/+166
| | |
| | * Rename SP10Ss hwdef file to align with othersGabriel Hart2021-01-121-1/+1
| | |
| | * Add Sofirn SP10S (adapter) and dual-voltage logicGabriel Hart2021-01-124-1/+36
| | |
| | * Fix 1-Series standby tick speed, use 2C TurboGabriel Hart2020-12-203-3/+6
| | |
| | * Add AVR 1-Series and t1616 board and scriptsGabriel Hart2020-12-189-6/+185
| |/ |/|
* | added model number to Lume1 FW3X build targetSelene ToyKeeper2020-10-182-0/+5
| |
* | merged fsm branch, mostly to get Lume1 driver supportSelene ToyKeeper2020-10-185-30/+130
|\ \
| * \ merged lume1 branch for LoneOceans' FW3A-Lume1 driver supportSelene ToyKeeper2020-10-183-3/+125
| |\ \
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 12:29:12 +0000