aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Collapse)AuthorAgeFilesLines
* moved sunset bump from 3C to 4H, fixed candle sunset behavior (was ↵Selene ToyKeeper2020-07-302-25/+28
| | | | overflowing / wrapping around)
* replaced "goodnight / sunset mode" with sunset timer, which works in both ↵Selene ToyKeeper2020-07-308-130/+155
| | | | | | | | candle mode and regular ramp mode (not finished, but wanted to check in the code before continuing) (still needs the button mappings adjusted to avoid collision with 3C for change-ramp-style)
* reduced ROM another 12+6 bytes with more non-volatile varsSelene ToyKeeper2020-07-302-3/+3
| | | | | (because they don't need to be volatile any more)
* reduced ROM size 56 bytes by making actual_level non-volatileSelene ToyKeeper2020-07-291-1/+1
| | | | | (seems unnecessary now; doesn't change in the middle of an event handler any more)
* reduced ROM 42 bytes by making "emissions" non-volatileSelene ToyKeeper2020-07-291-1/+3
| | | | | (doesn't seem to be needed any more, ever since the IRQ rewrite a few months ago)
* reduced ROM size slightly by making strobe vars non-volatileSelene ToyKeeper2020-07-284-10/+8
| | | | | (they didn't need to be; it was just wasting bytes)
* s/DEFAULT_SIMPLE_UI/SIMPLE_UI/ in a file I forgot to update earlierSelene ToyKeeper2020-07-281-12/+12
|
* reorganized some code to make it cleaner...Selene ToyKeeper2020-07-283-72/+99
| | | | | | | | | | - moved FF strobe loop() logic to an inline function in ff-strobe-modes file - changed function order in anduril.c to put setup+loop first - put common/default case first in setup() - added support for tint ramping on dual-switch lights with power clicky (even though no such lights exist yet) - comment gardening
* moved candle mode to its own file, since it's kinda bigSelene ToyKeeper2020-07-284-138/+194
|
* renamed strobes.* to strobe-modes.*Selene ToyKeeper2020-07-286-22/+22
|
* moved aux LED code into its own fileSelene ToyKeeper2020-07-283-238/+290
|
* renamed off-state.* -> off-mode.*Selene ToyKeeper2020-07-223-10/+10
|
* renamed ramping.* -> ramp-mode.*Selene ToyKeeper2020-07-224-14/+20
|
* renamed lockout.* -> lockout-mode.*, moved user-configurable lockout options ↵Selene ToyKeeper2020-07-224-13/+15
| | | | to config-default.h
* added "make todo" to remind me about stuff I still need to finishSelene ToyKeeper2020-07-221-1/+4
|
* renamed beacon.* -> beacon-mode.*Selene ToyKeeper2020-07-223-10/+10
|
* renamed cfg-default.h to config-default.h, cleaned up some comments, ↵Selene ToyKeeper2020-07-222-31/+51
| | | | organized definitions
* more progress on refactoring Anduril into separate files... nearly done with ↵Selene ToyKeeper2020-07-2230-1357/+2016
| | | | the initial split
* started refactoring anduril into individual files...Selene ToyKeeper2020-07-2119-1028/+1548
| | | | | | | ... messy and very incomplete, but it's a start, and at least it still compiles. (the overall structure is ... weird. mostly because of compiling the entire program plus libraries in a single step, as a single file, to make -fwhole-program work)
* merged fsm branch (mostly because D4v2.5 build targets were merged into KR4,Selene ToyKeeper2020-07-145-15/+19
|\ | | | | | | | | and merging now will be easier than resolving conflicts later)
| * merged Emisar D4v2.5 build targets with Noctigon KR4 build targetsSelene ToyKeeper2020-07-145-133/+19
| | | | | | | | | | (because they're close enough that they can use the same code)
* | removed beacon config mode... replaced "click N times" with "hold for N ↵Selene ToyKeeper2020-07-121-28/+26
| | | | | | | | seconds" to configure it
* | fixed bug: button release events were sending 0 as the arg instead of the ↵Selene ToyKeeper2020-07-121-10/+9
| | | | | | | | | | | | | | number of ticks the button was held (bug had no effect in any current UIs, but I needed it fixed for a feature I want to add)
* | moved all config modes and aux LED config actions to 7C / 7HSelene ToyKeeper2020-07-121-19/+22
| |
* | allowed simple UI to use stepped ramp, reduced size,Selene ToyKeeper2020-07-121-63/+81
| | | | | | | | | | | | | | | | fixed wrong initial brightness on boot or after changing UI style, started making simple UI ramp configurable, made floor/ceil/steps for smooth/stepped/simple use arrays instead of individual vars, generally refactored a bit of ramp-related code
* | added lockout 4C -> on, lockout 4H -> floor, and strobe 5C -> momentarySelene ToyKeeper2020-07-121-2/+16
| |
* | cleaned up s/ceiling/ceil/ and s/muggle_/simple_ui_/ in config filesSelene ToyKeeper2020-07-1223-77/+77
| |
* | limited simple UI floor and ceiling to muggle mode levels,Selene ToyKeeper2020-07-121-52/+70
| | | | | | | | | | | | | | moved floor/ceiling calculations (mostly) to use only "ramp_floor" and "ramp_ceil" which update based on current mode, s/simple_mode/simple_ui/, made "ceil" vs "ceiling" more consistent
* | removed muggle mode, replaced it with simple mode (first pass, incomplete)Selene ToyKeeper2020-07-121-252/+136
|/
* made lighted button go low/high based on DEFAULT_LEVEL instead of MAX_1x7135,Selene ToyKeeper2020-07-084-7/+9
| | | | | | | because the MAX_1x7135 level is wrong on some lights (like the D4v2.5) ... and generally adjusted anything else necessary to make that work. (including a lower default on D18 and D4Sv2, which were both too high)
* fixed D4v2.5 button LED behaviorSelene ToyKeeper2020-07-081-5/+3
|
* added Emisar D4v2.5 support (D4v2 with a KR4 driver, same as KR4 but with ↵Selene ToyKeeper2020-07-083-0/+132
| | | | lighted button indicator LED support)
* merged from fsm to get latest updatesSelene ToyKeeper2020-06-0114-40/+106
|\
| * "SOS" is treated as one "letter" in Morse code... it's not three lettersSelene ToyKeeper2020-06-011-1/+2
| | | | | | | | | | (so, don't put the normal inter-letter gap between)
| * fixed compile error when all strobe modes are disabledSelene ToyKeeper2020-05-141-0/+6
| |
| * gave Werner's UI a simple MakefileSelene ToyKeeper2020-05-141-0/+7
| |
| * fixed builds of Werner's UI on targets which had been failing (Noctigon K1, ↵Selene ToyKeeper2020-05-142-3/+10
| | | | | | | | BLF LT1 Lantern, and all attiny1634 targets)
| * fixed eeprom_wl functions on attiny1634Selene ToyKeeper2020-05-141-10/+10
| | | | | | | | | | (didn't build before, due to a data type mismatch)
| * fixed build of "momentary" example UISelene ToyKeeper2020-05-142-2/+1
| |
| * fixed build when USE_GOODNIGHT_MODE not enabledSelene ToyKeeper2020-05-141-0/+14
| |
| * merged Noctigon KR4 and K1-12V (XHP35) branchesSelene ToyKeeper2020-04-2711-22/+254
| |\ | | | | | | | | | | | | | | | | | | | | | | | | (also includes some minor thermal updates to make it faster, more stable, and easier to tweak per host) (and some code to prevent eeprom corruption while turning power chips on/off) (and enables reboot function on tiny1634) (and makes rainbow aux RGB mode speed configurable per host) (and calibrates the original K1 a bit better)
| * | added a noFET build for D4v2, by requestSelene ToyKeeper2020-04-132-1/+35
| | |
| * | recalibrated timing of nice_delay_ms() based on strobe speed measurements...Selene ToyKeeper2020-04-132-5/+5
| | | | | | | | | | | | gets very close to 24.2 Hz and 10.0 Hz for default strobe settings now
| * | apparently the D1 can also be purchased with a D4v2 driver... so it's ↵Selene ToyKeeper2020-03-221-0/+17
| | | | | | | | | | | | basically a D1v2
| * | merged fsm branch, mostly to get new ADC code (thermal regulation and ↵Selene ToyKeeper2020-03-1626-434/+359
| |\ \ | | | | | | | | | | | | voltage monitoring)
| | * | removed more references to THERM_HARD_TURBO_DROPSelene ToyKeeper2020-03-164-19/+0
| | | |
* | | | K1-SBT90.2 doesn't need party strobe slowed downSelene ToyKeeper2020-06-011-1/+5
| | | |
* | | | added config which matches the spec for K1-SBT90.2, but it's not tested ↵Selene ToyKeeper2020-04-281-0/+57
| |_|/ |/| | | | | | | | (there's no hardware to test on)
* | | calibrated K1 and K1-12V thermal response (smaller, slower) and candle mode ↵Selene ToyKeeper2020-04-272-2/+16
| | | | | | | | | | | | (wobblier), and gave K1-12V a lower moon mode
* | | set default thermal response magnitude back to how it was before the KR4 ↵Selene ToyKeeper2020-04-272-2/+3
| | | | | | | | | | | | updates, because it worked well on many hosts before...
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-29 13:26:36 +0000