aboutsummaryrefslogtreecommitdiff
path: root/tk-attiny.h (unfollow)
Commit message (Collapse)AuthorFilesLines
2023-11-03renamed tk*.h to arch/*.h or fsm/*.h (part 1)Selene ToyKeeper1-157/+0
to get them out of the root dir, and to start cleaning up mcu/arch code
2023-10-29fixed delay timing on attiny1616 (it was about 17% too long this whole time)Selene ToyKeeper1-1/+1
(and re-adjusted smooth step timing accordingly)
2023-04-17switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper1-23/+6
instead of full GPL headers (or all too often, nothing at all) There are a few "FIXME" entries where I'm not sure about the correct copyright.
2021-05-04Update 1-Series to use 10 MHz clock and Phase Correct PWM. Add PWM ↵Gabriel Hart1-8/+8
documentation. Also clear thermal offset on factory reset instead of setting it to 21*C.
2021-04-01touched up a bit of formatting and a note for later optimizationSelene ToyKeeper1-0/+1
2020-12-18Add AVR 1-Series and t1616 board and scriptsGabriel Hart1-0/+28
2020-04-29removed unused TEMP_CHANNEL thing from FSM-related codeSelene ToyKeeper1-2/+3
2019-09-28remapped D1S V2 pins to match new driverSelene ToyKeeper1-0/+4
(and changed a bit about how ADC / DIDR definitions work, since this now uses DIDR1 instead of DIDR0)
2019-08-26fixed attiny13 buildsSelene ToyKeeper1-1/+3
2019-08-05merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper1-3/+52
------------------------------------------------------------ revno: 457 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 22:42:50 -0600 message: make sure no thermal events are handled while off (even though it shouldn't be possible, since it only happens after 15 minutes, and the light is only awake in muggle-off mode for 1 second) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 456 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:09:58 -0600 message: don't measure temperature while asleep (fixes bug on D4 V2, where it would start flashing after 15 minutes turned off in muggle mode) (also should speed up response to battery voltage changes while asleep) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 455 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:05:56 -0600 message: made strobe brightness configurable per build target modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 454 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-07-10 10:22:44 -0600 message: made the "therm faster" code only affect ramping down, and fixed a couple minor logic issues in the thermal regulation code modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 452 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:18:25 -0600 message: fixed spelling error in D4 / D4V2 files modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 451 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:16:57 -0600 message: fixed placement of #ifdefs on reboot loop prevention modified: ToyKeeper/spaghetti-monster/fsm-main.c ------------------------------------------------------------ revno: 450 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:15:59 -0600 message: made level_calc.py also find and show the channel transition points, so I won't have to do this manually all the time modified: bin/level_calc.py ------------------------------------------------------------ revno: 449 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:31:37 -0600 message: merged from fsm branch to get factory reset function modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/anduril.txt ToyKeeper/spaghetti-monster/anduril/cfg-fw3a.h ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 448 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:40 -0600 message: started adding some ideas for later (maybe), but not currently used... ... may remove again later modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 447 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:11 -0600 message: adjusted D4 / D4v2 thermal response again; it really doesn't want to behave modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 446 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:18:06 -0600 message: made d4 ramp slightly smoother at clock speed change modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 445 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:17:40 -0600 message: improved D4S thermal response; less prone to overshooting and oscillation modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4s.h ------------------------------------------------------------ revno: 444 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:12:26 -0600 message: adjusted Emisar D4 thermal response values... (this light really doesn't want to behave thermally, so the values here don't quite get an ideal response, but they're a lot better than they were) modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 443 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:11:08 -0600 message: made anduril raise brightness slower when doing thermal regulation, made hard turbo drop only activate when it's actually at turbo modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 442 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:09:54 -0600 message: made more thermal parameters configurable... - the speed of thermal history rotation (every 1s, 2s, or 4s) - prediction strength also made minimum time between temperature warnings factor in the lowpass, so the default is 5s again instead of 7s modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 441 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:39:34 -0600 message: adjusted d4v2 ramp to hit 1x7135 exactly at level 4/7, turned off hard turbo drop because it doesn't seem to be needed any more modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 440 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:33:21 -0600 message: merged updates from fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-ff-e01.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e07-2.h renamed: ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-edc-thrower.h => ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fireflies-ui/Makefile ToyKeeper/spaghetti-monster/fireflies-ui/build-all.sh ToyKeeper/spaghetti-monster/fireflies-ui/fireflies-ui.c ToyKeeper/spaghetti-monster/fireflies-ui/meta ToyKeeper/spaghetti-monster/fsm-events.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h ------------------------------------------------------------ revno: 439 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 02:10:02 -0600 message: added D4v2-219 build for reduced power (only 75% FET) added: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2-219.h ------------------------------------------------------------ revno: 438 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:57:14 -0600 message: made MCU stay awake at boot long enough to get accurate voltage reading, sped up return-to-sleep delays, made RGB "voltage" preview mode last twice as long modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 437 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:56:18 -0600 message: sped up button release timeout slightly to reduce lag when turning off light modified: ToyKeeper/spaghetti-monster/fsm-events.h ------------------------------------------------------------ revno: 436 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-05-23 00:43:14 -0600 message: merged from fsm branch to get a bunch of recent updates modified: ... a lot of files ------------------------------------------------------------ revno: 435 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Tue 2019-05-21 14:25:28 -0600 message: no muggle mode on D4v2, by request modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 434 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-05-20 00:16:26 -0600 message: improved RGB aux LED previews for voltage mode and blinking mode modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 433 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:53:47 -0600 message: fixed D4v2 ramp shape and thermal limit modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 432 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:39:48 -0600 message: merged from lantern branch, to get newer candle mode added: ToyKeeper/spaghetti-monster/anduril/cfg-blf-lantern.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-ramping.c ToyKeeper/spaghetti-monster/fsm-ramping.h ------------------------------------------------------------ revno: 431 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:29:28 -0600 message: merged from upstream fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-fw3a-219.h modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ------------------------------------------------------------ revno: 430 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:55 -0600 message: use only red, green, and blue for voltage display... don't do color mixes modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 429 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:30 -0600 message: flash-tiny1634-fuses had a typo modified: bin/flash-tiny1634-fuses.sh ------------------------------------------------------------ revno: 428 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:03:28 -0600 message: fixed builds without sleep ticks enabled modified: ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 427 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:01:17 -0600 message: made aux LEDs turn on at boot time, instead of waiting until sleep LVP measures the battery modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 426 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:00:34 -0600 message: implemented LVP in standby mode (which allows LVP to turn off high-drain aux LEDs while asleep, and allows RGB readout to change with battery charge) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-adc.h ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 425 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:33 -0600 message: enable tenclick thermal config in D4v2 target modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 424 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:16 -0600 message: added RGB support to lockout mode, improved RGB behavior, set defaults to low because the high mode is way too bright modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 423 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 02:36:55 -0600 message: got RGB aux LED modes working -- (off, low, high, blinking) and (7 colors + rainbow + voltage) (off mode only, for now, no lockout) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 422 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:25:23 -0600 message: Turn off aux LEDs when voltage is low. They use too much power on high mode. modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 421 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:24:15 -0600 message: Calibrated D4v2 voltage. modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 420 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:48:51 -0600 message: fixed RGB aux LED low mode modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ------------------------------------------------------------ revno: 419 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:47 -0600 message: started on RGB aux LED support in Anduril, but it's just an early test right now modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 418 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:05 -0600 message: adjust ramping auto-aux-LED code to include RGB version (shut off when main LEDs are on) modified: ToyKeeper/spaghetti-monster/fsm-ramping.c ------------------------------------------------------------ revno: 417 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:33:08 -0600 message: started on tiny1634 RGB aux LED support (seems to work except for the "low" output mode) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 416 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:22:15 -0600 message: fixed D4v2 PWM speed and delay speed, fixed hardware setup reference comments modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 415 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:20:50 -0600 message: fixed attiny1634 clock speed adjustments modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 414 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 15:38:52 -0600 message: renamed SWITCH_PIN_D (pin data) to SWITCH_PORT, to match AVR manual terminology (even though the value should be PINA or PINB or PINC) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 413 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:48:10 -0600 message: added tiny1634 flashing scripts added: bin/flash-tiny1634-fuses.sh bin/flash-tiny1634.sh ------------------------------------------------------------ revno: 411 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:42:35 -0600 message: started adding tiny1634 support to FSM ... so much kludge, such need clean modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/spaghetti-monster/fsm-wdt.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 410 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:40:15 -0600 message: added D4v2-1634 config and hwdef files modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 409 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:39:24 -0600 message: made build-all.sh detect attiny type from cfg file, and use it modified: ToyKeeper/spaghetti-monster/anduril/build-all.sh ------------------------------------------------------------ revno: 403 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:14:51 -0600 message: merged updates from upstream added/modified: ... lots of files ------------------------------------------------------------ revno: 402 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:08:08 -0600 message: merged in some aux LED code updates from anduril modified: ToyKeeper/spaghetti-monster/rampingios/rampingiosv3.c ------------------------------------------------------------ revno: 401 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:23:09 -0700 message: tk-attiny.h: started adding other MCU support also removed redundant eeprom size hints modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 400 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:21:59 -0700 message: made dynamic clocking safer and more portable (uses library function instead of direct register access) (lib disables interrupts properly, which I wasn't doing) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-events.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/spaghetti-monster.h
2019-07-26merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper1-3/+52
------------------------------------------------------------ revno: 457 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 22:42:50 -0600 message: make sure no thermal events are handled while off (even though it shouldn't be possible, since it only happens after 15 minutes, and the light is only awake in muggle-off mode for 1 second) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 456 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:09:58 -0600 message: don't measure temperature while asleep (fixes bug on D4 V2, where it would start flashing after 15 minutes turned off in muggle mode) (also should speed up response to battery voltage changes while asleep) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 455 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:05:56 -0600 message: made strobe brightness configurable per build target modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 454 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-07-10 10:22:44 -0600 message: made the "therm faster" code only affect ramping down, and fixed a couple minor logic issues in the thermal regulation code modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 452 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:18:25 -0600 message: fixed spelling error in D4 / D4V2 files modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 451 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:16:57 -0600 message: fixed placement of #ifdefs on reboot loop prevention modified: ToyKeeper/spaghetti-monster/fsm-main.c ------------------------------------------------------------ revno: 450 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:15:59 -0600 message: made level_calc.py also find and show the channel transition points, so I won't have to do this manually all the time modified: bin/level_calc.py ------------------------------------------------------------ revno: 449 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:31:37 -0600 message: merged from fsm branch to get factory reset function modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/anduril.txt ToyKeeper/spaghetti-monster/anduril/cfg-fw3a.h ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 448 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:40 -0600 message: started adding some ideas for later (maybe), but not currently used... ... may remove again later modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 447 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:11 -0600 message: adjusted D4 / D4v2 thermal response again; it really doesn't want to behave modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 446 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:18:06 -0600 message: made d4 ramp slightly smoother at clock speed change modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 445 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:17:40 -0600 message: improved D4S thermal response; less prone to overshooting and oscillation modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4s.h ------------------------------------------------------------ revno: 444 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:12:26 -0600 message: adjusted Emisar D4 thermal response values... (this light really doesn't want to behave thermally, so the values here don't quite get an ideal response, but they're a lot better than they were) modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 443 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:11:08 -0600 message: made anduril raise brightness slower when doing thermal regulation, made hard turbo drop only activate when it's actually at turbo modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 442 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:09:54 -0600 message: made more thermal parameters configurable... - the speed of thermal history rotation (every 1s, 2s, or 4s) - prediction strength also made minimum time between temperature warnings factor in the lowpass, so the default is 5s again instead of 7s modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 441 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:39:34 -0600 message: adjusted d4v2 ramp to hit 1x7135 exactly at level 4/7, turned off hard turbo drop because it doesn't seem to be needed any more modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 440 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:33:21 -0600 message: merged updates from fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-ff-e01.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e07-2.h renamed: ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-edc-thrower.h => ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fireflies-ui/Makefile ToyKeeper/spaghetti-monster/fireflies-ui/build-all.sh ToyKeeper/spaghetti-monster/fireflies-ui/fireflies-ui.c ToyKeeper/spaghetti-monster/fireflies-ui/meta ToyKeeper/spaghetti-monster/fsm-events.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h ------------------------------------------------------------ revno: 439 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 02:10:02 -0600 message: added D4v2-219 build for reduced power (only 75% FET) added: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2-219.h ------------------------------------------------------------ revno: 438 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:57:14 -0600 message: made MCU stay awake at boot long enough to get accurate voltage reading, sped up return-to-sleep delays, made RGB "voltage" preview mode last twice as long modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 437 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:56:18 -0600 message: sped up button release timeout slightly to reduce lag when turning off light modified: ToyKeeper/spaghetti-monster/fsm-events.h ------------------------------------------------------------ revno: 436 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-05-23 00:43:14 -0600 message: merged from fsm branch to get a bunch of recent updates modified: ... a lot of files ------------------------------------------------------------ revno: 435 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Tue 2019-05-21 14:25:28 -0600 message: no muggle mode on D4v2, by request modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 434 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-05-20 00:16:26 -0600 message: improved RGB aux LED previews for voltage mode and blinking mode modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 433 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:53:47 -0600 message: fixed D4v2 ramp shape and thermal limit modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 432 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:39:48 -0600 message: merged from lantern branch, to get newer candle mode added: ToyKeeper/spaghetti-monster/anduril/cfg-blf-lantern.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-ramping.c ToyKeeper/spaghetti-monster/fsm-ramping.h ------------------------------------------------------------ revno: 431 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:29:28 -0600 message: merged from upstream fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-fw3a-219.h modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ------------------------------------------------------------ revno: 430 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:55 -0600 message: use only red, green, and blue for voltage display... don't do color mixes modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 429 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:30 -0600 message: flash-tiny1634-fuses had a typo modified: bin/flash-tiny1634-fuses.sh ------------------------------------------------------------ revno: 428 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:03:28 -0600 message: fixed builds without sleep ticks enabled modified: ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 427 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:01:17 -0600 message: made aux LEDs turn on at boot time, instead of waiting until sleep LVP measures the battery modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 426 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:00:34 -0600 message: implemented LVP in standby mode (which allows LVP to turn off high-drain aux LEDs while asleep, and allows RGB readout to change with battery charge) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-adc.h ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 425 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:33 -0600 message: enable tenclick thermal config in D4v2 target modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 424 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:16 -0600 message: added RGB support to lockout mode, improved RGB behavior, set defaults to low because the high mode is way too bright modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 423 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 02:36:55 -0600 message: got RGB aux LED modes working -- (off, low, high, blinking) and (7 colors + rainbow + voltage) (off mode only, for now, no lockout) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 422 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:25:23 -0600 message: Turn off aux LEDs when voltage is low. They use too much power on high mode. modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 421 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:24:15 -0600 message: Calibrated D4v2 voltage. modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 420 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:48:51 -0600 message: fixed RGB aux LED low mode modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ------------------------------------------------------------ revno: 419 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:47 -0600 message: started on RGB aux LED support in Anduril, but it's just an early test right now modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 418 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:05 -0600 message: adjust ramping auto-aux-LED code to include RGB version (shut off when main LEDs are on) modified: ToyKeeper/spaghetti-monster/fsm-ramping.c ------------------------------------------------------------ revno: 417 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:33:08 -0600 message: started on tiny1634 RGB aux LED support (seems to work except for the "low" output mode) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 416 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:22:15 -0600 message: fixed D4v2 PWM speed and delay speed, fixed hardware setup reference comments modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 415 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:20:50 -0600 message: fixed attiny1634 clock speed adjustments modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 414 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 15:38:52 -0600 message: renamed SWITCH_PIN_D (pin data) to SWITCH_PORT, to match AVR manual terminology (even though the value should be PINA or PINB or PINC) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 413 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:48:10 -0600 message: added tiny1634 flashing scripts added: bin/flash-tiny1634-fuses.sh bin/flash-tiny1634.sh ------------------------------------------------------------ revno: 411 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:42:35 -0600 message: started adding tiny1634 support to FSM ... so much kludge, such need clean modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/spaghetti-monster/fsm-wdt.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 410 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:40:15 -0600 message: added D4v2-1634 config and hwdef files modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 409 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:39:24 -0600 message: made build-all.sh detect attiny type from cfg file, and use it modified: ToyKeeper/spaghetti-monster/anduril/build-all.sh ------------------------------------------------------------ revno: 403 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:14:51 -0600 message: merged updates from upstream added/modified: ... lots of files ------------------------------------------------------------ revno: 402 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:08:08 -0600 message: merged in some aux LED code updates from anduril modified: ToyKeeper/spaghetti-monster/rampingios/rampingiosv3.c ------------------------------------------------------------ revno: 401 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:23:09 -0700 message: tk-attiny.h: started adding other MCU support also removed redundant eeprom size hints modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 400 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:21:59 -0700 message: made dynamic clocking safer and more portable (uses library function instead of direct register access) (lib disables interrupts properly, which I wasn't doing) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-events.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/spaghetti-monster.h
2018-12-18Reworked the config file include system so it'll include the #defined valueSelene ToyKeeper1-35/+8
instead of having to hard-code a bunch of specific recognized values.
2018-10-07First working PL47 build. Does aux LEDs on pin 7 but not pin 3.Selene ToyKeeper1-0/+3
2018-08-31Added support for the BLF/Lumintop GT Mini.Selene ToyKeeper1-0/+3
(same as the Emisar D1S, but with a lighted button)
2018-08-30First Anduril build for Fireflies ROT66.Selene ToyKeeper1-0/+3
2018-07-01Added hardware profiles and build targets for Emisar D1 and D1S.Selene ToyKeeper1-0/+6
(same as D4, except with lower power-to-mass ratio)
2018-06-24Refactored driver/hardware definition code to be one file per driver type.Selene ToyKeeper1-260/+22
2018-06-24Initial D4S support for Anduril. (but only the parts which can't be public yet)Selene ToyKeeper1-0/+6
2018-05-01Created BLF GT driver definition.Selene ToyKeeper1-0/+45
2017-10-21Made DELAY_ZERO_TIME a per-MCU option; hopefully will sync to PWM better ↵Selene ToyKeeper1-0/+9
that way. Added BLF Q8 driver type, but it's basically identical to the D4 except in name. (can be used to auto-detect whether to use indicator LED, and what the diode drop constant should be)
2017-09-22Added FW3A driver support to FSM and Anduril.Selene ToyKeeper1-0/+37
Made lightning storm mode look a bit more like real lightning. Minor refactoring on how single-option config modes save state.
2017-09-03Got the 4th PWM channel to work, ish. (channel 4 is inverted though)Selene ToyKeeper1-8/+10
Moved go_to_suspend thing into main() instead of making each UI handle that during loop(). Made default_state() optional. Fixed bug where battcheck and other number readouts could interfere with the state which interrupted them. (they would sometimes turn the LED off after the new state had already started) Updated darkhorse's moon levels to match new ramp on D4 hardware.
2017-08-30Replaced FSM_*_LAYOUT with FSM_*_DRIVER because I think it makes more sense.Selene ToyKeeper1-11/+11
Made momentary.c compile again. Updated fsm-main to use whichever delay function is available.
2017-08-26Replaced bare config errors with the preprocessor's intended method of ↵Selene ToyKeeper1-2/+2
throwing config errors.
2017-08-19Added unfinished UI similar to Olight Baton series.Selene ToyKeeper1-9/+7
Fixed 2nd PWM channel init. May have fixed 3rd and 4th too. Added handling for complete normal clicks, but it's kind of flaky so far. Added handling for sustained button holds. Added missing 'arg' to state change functions.
2017-08-19Renamed from RoundTable to SpaghettiMonster (FSM).Selene ToyKeeper1-2/+2
2017-08-18First RoundTable example actually works (simple momentary 1-mode UI).Selene ToyKeeper1-2/+15
Changed how tk-attiny.h detects whether a layout was defined. Changed how tk-attiny.h detects number of PWM channels for new-style layouts. Added no-underscore versions of delay functions. Lots of RoundTable refactoring and blank-filling.
2017-08-18Some early ideas for Round Table. Nothing close to compile-able yet.Selene ToyKeeper1-1/+81
2017-05-01fixed tiny25 BOGOMIPS valueSelene ToyKeeper1-1/+1
(not sure why it was changed, but it was wrong)
2017-03-18Fixed LVP. Verified it works on FET+1 and attiny25. Added presets for ↵Selene ToyKeeper1-0/+12
MTN17DDm FET+1. Moved FAST/PHASE definitions to tk-attiny.h. These are really a per-layout option so it's better there.
2016-05-23Added bistro-tripledown.c.Selene ToyKeeper1-1/+34
It's a slight mod of bistro, to make it work on TripleDown drivers.
2015-10-10Made a simple program to blink out temperature measurements.Selene ToyKeeper1-0/+3
Added some basic temperature stuff to header files.
2015-10-05Added nanjg board/pin layout definition to tk-attiny.h.Selene ToyKeeper1-0/+13
(at least works for s7.c, haven't tried others yet)
2015-09-11Oops, delay_s() should delay for 1000 ms, not BOGOMIPS ms.Selene ToyKeeper1-2/+3
2015-09-11Refactored blf-a6 a bunch to export code to includes and make attiny ↵Selene ToyKeeper1-0/+90
portability a bit better. Moved MCU hardware options and pin layout to tk-attiny.h. Moved voltage and OTC hardcoded values to tk-calibration.h. Moved delay functions to tk-delay.h, and made it use BOGOMIPS instead of DELAY_TWEAK. Moved voltage ADC and most of the battcheck code to tk-voltage.h. Changed EEPLEN to EEPSIZE. Made 1.1V reference symbol consistent across MCUs to avoid repeated #if/#else clauses.
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 20:46:54 +0000