From 312f7442c31d72dd36f108de9542f81960526658 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Sun, 17 Dec 2023 00:18:14 -0700
Subject: documented FW3X swapped pins better

---
 hw/lumintop/fw3x-lume1/README.md | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/hw/lumintop/fw3x-lume1/README.md b/hw/lumintop/fw3x-lume1/README.md
index 190cd0e..d155eba 100644
--- a/hw/lumintop/fw3x-lume1/README.md
+++ b/hw/lumintop/fw3x-lume1/README.md
@@ -6,9 +6,10 @@ sensor.
 
 ## Notes of interest
 
-**Flashing firmware**:  The MOSI and MISO pin are swapped, compared to a Hanklight.
-LoneOceans sent a fixed driver design to Lumintop, but the new design didn't
-get produced.  So to flash firmware, swap the wires for those two pins first.
+**Flashing firmware**:  The MOSI and MISO pin are swapped on PCBs dated 01/20,
+compared to a Hanklight.  LoneOceans sent a fixed driver design (dated 06/20)
+to Lumintop, but the new design didn't get produced.  So to flash firmware,
+swap the wires for those two pins first.
 
 **Fuses**: Lumintop seems to have shipped the FW3X with the wrong fuse values,
 so it has the MCU severely underclocked and everything runs much slower than it
@@ -29,3 +30,6 @@ output is unstable so there is very visible ripple.  The user can either raise
 the ramp floor to a level high enough to avoid these issues, or learn to live
 with the ripple and preflash.
 
+LoneOceans has some extra notes here, which mostly apply only to older versions
+of the code: https://budgetlightforum.com/t/anduril-2/62656/531
+
-- 
cgit v1.2.3