From 79ab84a5590067412a285f7a4f42842382c850fe Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Wed, 5 Aug 2020 21:52:41 -0600
Subject: organized config defaults, added some ramp options to default config

---
 spaghetti-monster/anduril/cfg-blf-lantern.h |  4 ++-
 spaghetti-monster/anduril/config-default.h  | 51 ++++++++++++++++++++---------
 spaghetti-monster/anduril/ramp-mode.h       |  2 --
 3 files changed, 39 insertions(+), 18 deletions(-)

diff --git a/spaghetti-monster/anduril/cfg-blf-lantern.h b/spaghetti-monster/anduril/cfg-blf-lantern.h
index 39ae7b8..9a91c93 100644
--- a/spaghetti-monster/anduril/cfg-blf-lantern.h
+++ b/spaghetti-monster/anduril/cfg-blf-lantern.h
@@ -46,9 +46,11 @@
 // the default of 26 looks a bit flat, so increase it
 #define CANDLE_AMPLITUDE 40
 
+// override default ramp style
+#undef RAMP_STYLE
+#define RAMP_STYLE 1  // 0 = smooth, 1 = stepped
 // set floor and ceiling as far apart as possible
 // because this lantern isn't overpowered
-#define RAMP_STYLE 1  // 0 = smooth, 1 = stepped
 #define RAMP_SMOOTH_FLOOR 1
 #define RAMP_SMOOTH_CEIL  150
 #define RAMP_DISCRETE_FLOOR 10
diff --git a/spaghetti-monster/anduril/config-default.h b/spaghetti-monster/anduril/config-default.h
index da79068..ac30b3a 100644
--- a/spaghetti-monster/anduril/config-default.h
+++ b/spaghetti-monster/anduril/config-default.h
@@ -38,16 +38,23 @@
 #define USE_THERMAL_REGULATION
 #define DEFAULT_THERM_CEIL 45  // try not to get hotter than this (in C)
 
-// factory reset function erases user's runtime configuration in eeprom
-#define USE_FACTORY_RESET
-//#define USE_SOFT_FACTORY_RESET  // only needed on models which can't use hold-button-at-boot
 
-// dual-switch support (second switch is a tail clicky)
-// (currently incompatible with factory reset)
-//#define START_AT_MEMORIZED_LEVEL
+// Include a simplified UI for non-enthusiasts?
+#define USE_SIMPLE_UI
 
-// include a function to blink out the firmware version
-#define USE_VERSION_CHECK
+
+///// Ramp mode options /////
+
+// button timing for turning light on/off:
+// B_PRESS_T:   activate as soon as button is pressed
+// B_RELEASE_T: activate when user lets go of button
+// B_TIMEOUT_T: activate when we're sure the user won't double-click
+// defaults are release on, timeout off
+#define B_TIMING_ON B_RELEASE_T
+#define B_TIMING_OFF B_TIMEOUT_T
+
+// default ramp style: 0 = smooth, 1 = stepped
+#define RAMP_STYLE 0
 
 // short blip when crossing from "click" to "hold" from off
 // (helps the user hit moon mode exactly, instead of holding too long
@@ -59,9 +66,6 @@
 #define BLINK_AT_RAMP_CEIL
 //#define BLINK_AT_STEPS  // whenever a discrete ramp mode is passed in smooth mode
 
-// Include a simplified UI for non-enthusiasts?
-#define USE_SIMPLE_UI
-
 // make the ramps configurable by the user
 #define USE_RAMP_CONFIG
 
@@ -73,6 +77,26 @@
 // TODO: remap to a shorter button sequence?
 #define USE_MANUAL_MEMORY
 
+// enable sunset timer (ramp-down and automatic shutoff)
+// timer is available in regular ramp mode and candle mode
+#define USE_SUNSET_TIMER
+
+
+///// What to do when power is connected /////
+// factory reset function erases user's runtime configuration in eeprom
+#define USE_FACTORY_RESET
+//#define USE_SOFT_FACTORY_RESET  // only needed on models which can't use hold-button-at-boot
+
+// dual-switch support (second switch is a tail clicky)
+// (currently incompatible with factory reset)
+//#define START_AT_MEMORIZED_LEVEL
+
+
+///// extra modes (enable / disable / configure each mode) /////
+
+// include a function to blink out the firmware version
+#define USE_VERSION_CHECK
+
 // enable the battery check mode (shows remaining charge) (requires USE_LVP)
 #define USE_BATTCHECK_MODE
 // battery readout style (pick one)
@@ -89,10 +113,6 @@
 // enable beacon mode
 #define USE_BEACON_MODE
 
-// enable sunset timer (ramp-down and automatic shutoff)
-// timer is available in regular ramp mode and candle mode
-#define USE_SUNSET_TIMER
-
 // enable/disable various strobe modes
 #define USE_BIKE_FLASHER_MODE
 #define USE_PARTY_STROBE_MODE
@@ -118,6 +138,7 @@
 // enable momentary mode
 #define USE_MOMENTARY_MODE
 
+
 // cut clock speed at very low modes for better efficiency
 // (defined here so config files can override it)
 #define USE_DYNAMIC_UNDERCLOCKING
diff --git a/spaghetti-monster/anduril/ramp-mode.h b/spaghetti-monster/anduril/ramp-mode.h
index 7d3d138..43e8844 100644
--- a/spaghetti-monster/anduril/ramp-mode.h
+++ b/spaghetti-monster/anduril/ramp-mode.h
@@ -62,7 +62,6 @@
 // timeout: react as soon as we're sure the user isn't doing a double-click
 #define B_TIMEOUT_T 2
 // defaults are release on, timeout off
-// TODO: Move these settings to config-default.h?
 #ifndef B_TIMING_ON
 //#define B_TIMING_ON B_PRESS_T
 #define B_TIMING_ON B_RELEASE_T
@@ -74,7 +73,6 @@
 
 // default ramp options if not overridden earlier per-driver
 #ifndef RAMP_STYLE
-// TODO: Move this setting to config-default.h?
 #define RAMP_STYLE 0  // smooth default
 #endif
 #ifndef RAMP_SMOOTH_FLOOR
-- 
cgit v1.2.3