From b5059bfc15cfab0fab0f2ef914128b63323e64c9 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Tue, 10 Oct 2023 22:58:04 -0600 Subject: converted mateminco-mf01-mini build to new API --- hwdef-Mateminco_MF01-Mini.h | 50 ----------- hwdef-mateminco-mf01-mini.h | 100 +++++++++++++++++++++ hwdef-mateminco-mf01s.h | 3 +- .../anduril/cfg-mateminco-mf01-mini.h | 38 ++++---- 4 files changed, 122 insertions(+), 69 deletions(-) delete mode 100644 hwdef-Mateminco_MF01-Mini.h create mode 100644 hwdef-mateminco-mf01-mini.h diff --git a/hwdef-Mateminco_MF01-Mini.h b/hwdef-Mateminco_MF01-Mini.h deleted file mode 100644 index 557e641..0000000 --- a/hwdef-Mateminco_MF01-Mini.h +++ /dev/null @@ -1,50 +0,0 @@ -// MF01-Mini driver layout -// Copyright (C) 2019-2023 Selene ToyKeeper -// SPDX-License-Identifier: GPL-3.0-or-later -#pragma once - -/* - * ---- - * Reset -|1 8|- VCC - * eswitch -|2 7|- aux LEDs - * FET PWM -|3 6|- PWM (7x7135) - * GND -|4 5|- PWM (1x7135) - * ---- - */ - -#define PWM_CHANNELS 3 - -#ifndef AUXLED_PIN -#define AUXLED_PIN PB2 // pin 7 -#endif - -#ifndef SWITCH_PIN -#define SWITCH_PIN PB3 // pin 2 -#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt -#endif - -#ifndef PWM1_PIN -#define PWM1_PIN PB0 // pin 5, 1x7135 PWM -#define PWM1_LVL OCR0A // OCR0A is the output compare register for PB0 -#endif -#ifndef PWM2_PIN -#define PWM2_PIN PB1 // pin 6, 7x7135 PWM -#define PWM2_LVL OCR0B // OCR0B is the output compare register for PB1 -#endif -#ifndef PWM3_PIN -#define PWM3_PIN PB4 // pin 3, FET PWM -#define PWM3_LVL OCR1B // OCR1B is the output compare register for PB4 -#endif - -#define ADC_PRSCL 0x07 // clk/128 - -// average drop across diode on this hardware -#ifndef VOLTAGE_FUDGE_FACTOR -#define VOLTAGE_FUDGE_FACTOR 5 // add 0.25V -#endif - -#define FAST 0xA3 // fast PWM both channels -#define PHASE 0xA1 // phase-correct PWM both channels - -#define LAYOUT_DEFINED - diff --git a/hwdef-mateminco-mf01-mini.h b/hwdef-mateminco-mf01-mini.h new file mode 100644 index 0000000..35405db --- /dev/null +++ b/hwdef-mateminco-mf01-mini.h @@ -0,0 +1,100 @@ +// Mateminco MF01-Mini driver layout +// Copyright (C) 2019-2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +/* + * ---- + * Reset -|1 8|- VCC + * eswitch -|2 7|- aux LEDs + * FET PWM -|3 6|- PWM (7x7135) + * GND -|4 5|- PWM (1x7135) + * ---- + */ + +#define ATTINY 85 +#include + +#define HWDEF_C_FILE hwdef-fw3a.c + +// channel modes +// * 0. FET+N+1 stacked +#define NUM_CHANNEL_MODES 1 +enum CHANNEL_MODES { + CM_MAIN = 0, +}; + +#define DEFAULT_CHANNEL_MODE CM_MAIN + +// right-most bit first, modes are in fedcba9876543210 order +#define CHANNEL_MODES_ENABLED 0b00000001 + + +#define PWM_CHANNELS 3 // old, remove this + +#define PWM_BITS 8 // attiny85 only supports up to 8 bits +#define PWM_GET PWM_GET8 +#define PWM_DATATYPE uint8_t +#define PWM_DATATYPE2 uint16_t +#define PWM1_DATATYPE uint8_t // 1x7135 ramp +#define PWM2_DATATYPE uint8_t // 7x7135 ramp +#define PWM3_DATATYPE uint8_t // DD FET ramp + +#define PWM_TOP_INIT 255 // highest value used in top half of ramp + +// 1x7135 channel +#define CH1_PIN PB0 // pin 5, 1x7135 PWM +#define CH1_PWM OCR0A // OCR0A is the output compare register for PB0 + +// 7x7135 channel +#define CH2_PIN PB1 // pin 6, 7x7135 PWM +#define CH2_PWM OCR0B // OCR0B is the output compare register for PB1 + +// DD FET channel +#define CH3_PIN PB4 // pin 3, FET PWM +#define CH3_PWM OCR1B // OCR1B is the output compare register for PB4 + +// lighted button and 1-channel front aux +#define AUXLED_PIN PB2 // pin 7 + +// e-switch +#ifndef SWITCH_PIN +#define SWITCH_PIN PB3 // pin 2 +#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt +#endif + +#define ADC_PRSCL 0x07 // clk/128 + +// average drop across diode on this hardware +#ifndef VOLTAGE_FUDGE_FACTOR +#define VOLTAGE_FUDGE_FACTOR 5 // add 0.25V +#endif + +#define FAST 0xA3 // fast PWM both channels +#define PHASE 0xA1 // phase-correct PWM both channels + + +inline void hwdef_setup() { + + // configure PWM channels + DDRB = (1 << CH1_PIN) + | (1 << CH2_PIN) + | (1 << CH3_PIN); + + // configure PWM channels + TCCR0B = 0x01; // pre-scaler for timer (1 => 1, 2 => 8, 3 => 64...) + TCCR0A = PHASE; + + // Second PWM counter is ... weird + TCCR1 = _BV (CS10); + GTCCR = _BV (COM1B1) | _BV (PWM1B); + OCR1C = PWM_TOP_INIT; // Set ceiling value to maximum + + // configure e-switch + PORTB = (1 << SWITCH_PIN); // e-switch is the only input + PCMSK = (1 << SWITCH_PIN); // pin change interrupt uses this pin +} + + +#define LAYOUT_DEFINED + diff --git a/hwdef-mateminco-mf01s.h b/hwdef-mateminco-mf01s.h index 14cf76b..af214b2 100644 --- a/hwdef-mateminco-mf01s.h +++ b/hwdef-mateminco-mf01s.h @@ -18,7 +18,7 @@ #define HWDEF_C_FILE hwdef-emisar-d4.c // channel modes -// * 0. FET+7135 stacked +// * 0. small FET + big FET stacked #define NUM_CHANNEL_MODES 1 enum CHANNEL_MODES { CM_MAIN = 0, @@ -49,6 +49,7 @@ enum CHANNEL_MODES { #define CH2_PIN PB1 // pin 6, FET PWM #define CH2_PWM OCR0B // OCR0B is the output compare register for PB1 +// lighted button and 1-channel front aux #define AUXLED_PIN PB4 // pin 3 // e-switch diff --git a/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h b/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h index 47ff84b..fb62ac6 100644 --- a/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h +++ b/spaghetti-monster/anduril/cfg-mateminco-mf01-mini.h @@ -4,7 +4,7 @@ #pragma once #define MODEL_NUMBER "0521" -#include "hwdef-Mateminco_MF01-Mini.h" +#include "hwdef-mateminco-mf01-mini.h" // the button lights up #define USE_INDICATOR_LED @@ -16,10 +16,7 @@ #define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1) -// don't blink during ramp, it's irrelevant and annoying on this light -#define BLINK_AT_RAMP_CEIL -#undef BLINK_AT_RAMP_MIDDLE -#undef BLINK_AT_RAMP_FLOOR +#define RAMP_SIZE 150 // measured brightness with Sofirn 5500mAh cell at 3.97V: // moon: 0.3 lm @@ -28,13 +25,13 @@ // channel 3: 3500 lm // ../../../bin/level_calc.py ninth 3 150 7135 1 2.5 115.65 7135 11 5 708.65 FET 1 10 3500 // (plus some manual tweaks for a smoother ramp) -#define RAMP_LENGTH 150 #define PWM1_LEVELS 1,1,2,2,3,3,4,5,5,6,7,8,9,9,10,14,15,16,17,18,19,20,21,22,24,26,28,30,32,34,37,39,42,45,48,51,54,58,62,65,69,74,78,83,88,93,98,104,110,116,123,130,137,145,153,161,170,179,188,198,208,219,231,243,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 #define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,11,13,16,18,20,23,25,28,31,34,37,40,43,47,50,54,58,62,66,70,75,80,85,90,95,100,106,112,118,125,131,138,145,153,161,169,177,185,194,204,213,223,233,244,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 #define PWM3_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,6,10,13,17,21,24,28,33,37,41,46,50,55,60,66,71,76,82,88,94,101,107,114,121,128,135,143,151,159,167,176,185,194,203,213,223,233,244,255 -#define MAX_1x7135 65 // ~113 lm -#define MAX_Nx7135 110 -#define HALFSPEED_LEVEL 16 + +#define MAX_1x7135 65 // ~113 lm +#define MAX_Nx7135 110 +#define HALFSPEED_LEVEL 16 #define QUARTERSPEED_LEVEL 8 #define RAMP_SMOOTH_FLOOR 1 // ~0.3 lm @@ -55,18 +52,23 @@ #define THERM_FASTER_LEVEL 130 // throttle back faster when high +// don't blink during ramp +//#define BLINK_AT_RAMP_CEIL +#undef BLINK_AT_RAMP_CEIL +#undef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_FLOOR + +// enable extra features +#define USE_SMOOTH_STEPS -// too big, remove stuff to make room +// too big, turn off extra features +#define USE_SOFT_FACTORY_RESET +//#undef USE_SIMPLE_UI +#undef USE_TACTICAL_MODE #undef USE_SOS_MODE +#undef USE_BEACON_MODE #undef USE_RAMP_AFTER_MOON_CONFIG -#undef USE_RAMP_SPEED_CONFIG +//#undef USE_RAMP_SPEED_CONFIG #undef USE_VOLTAGE_CORRECTION //#undef USE_2C_STYLE_CONFIG -// reduce size a bit -#ifdef USE_LOWPASS_WHILE_ASLEEP -#undef USE_LOWPASS_WHILE_ASLEEP -#endif - -// too big, turn off extra features -#undef USE_TACTICAL_MODE -- cgit v1.2.3