From f61088192b58a3e627cf97164aa05e4eb183fea3 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Wed, 30 Aug 2017 23:06:16 -0600 Subject: Updated anduril.txt to match current code. --- spaghetti-monster/anduril.txt | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/spaghetti-monster/anduril.txt b/spaghetti-monster/anduril.txt index c6213e8..bb0f5e2 100644 --- a/spaghetti-monster/anduril.txt +++ b/spaghetti-monster/anduril.txt @@ -4,7 +4,7 @@ From off: * 2 clicks: highest ramp level * Click, hold: highest level then ramp down * 3 clicks: battcheck mode - (battcheck, tempcheck, then beacon?) + (battcheck, goodnight, beacon, tempcheck) * 4 clicks: lock-out * 5 clicks: strobe modes (bike flasher, party strobe, tactical strobe, lightning storm mode) @@ -55,12 +55,24 @@ Lightning storm mode: * 2 clicks: bike flasher Battcheck mode: + * 1 click: off + * 2 clicks: goodnight mode + +Goodnight mode: + * 1 click: off + * 2 clicks: beacon mode + +Beacon mode: * 1 click: off * 2 clicks: tempcheck mode + * 3 clicks: configure time between pulses + +Beacon config mode: + * At buzz, click N times to set beacon frequency to N seconds. Tempcheck mode: * 1 click: off - * 2 clicks: beacon mode + * 2 clicks: battcheck mode * 3 clicks: thermal config mode - Hold: thermal calibration mode @@ -71,14 +83,6 @@ Thermal calibration mode: - Hold until hot: set new ceiling value - ... don't hold: blink out current ceiling value and exit -Beacon mode: - * 1 click: off - * 2 clicks: battcheck mode - * 3 clicks: configure time between pulses - -Beacon config mode: - * At buzz, click N times to set beacon frequency to N seconds. - Momentary mode: * Press button: Light on (at memorized level). * Release button: Light off. @@ -92,5 +96,5 @@ TODO: - a way to blink out the firmware version? - indicator LED support - a way to configure indicator LED behavior? - - add goodnight mode? - - add lightning mode? + * add goodnight mode? + * add lightning mode? -- cgit v1.2.3