From 8fc92fc18e2e04973316782a04cfae7fbf3b8df6 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Mon, 7 Jul 2025 04:00:41 -0600 Subject: spacing, misc cleanup, made anchors work, fixed bad link (for some reason, "a name" wasn't working when clicked, but "a id" does) --- docs/anduril-manual.md | 38 +++++++++++++++++++++++--------------- 1 file changed, 23 insertions(+), 15 deletions(-) (limited to 'docs') diff --git a/docs/anduril-manual.md b/docs/anduril-manual.md index 479289f..4e28803 100644 --- a/docs/anduril-manual.md +++ b/docs/anduril-manual.md @@ -32,6 +32,7 @@ For a full list of button mappings, scroll down to the If you have a specific question, it may be covered in the [FAQ](#faq). + Button presses -------------- @@ -218,15 +219,15 @@ Advanced UI's ramp. There are four ways to access ramping mode when the light is off: - `1C`: Turn on at the memorized brightness. - (see below for details about what "memorized" means) + (see below for details about what "memorized" means) - `1H`: Turn on at the floor level. Let go after the light turns on to - stay at the floor level, or keep holding to ramp up. + stay at the floor level, or keep holding to ramp up. - `2C`: Turn on at the ceiling level. - - `2H`: Turn on at full power, turn off when released. (momentary turbo) - (in Simple UI, this uses the ceiling level instead of turbo) + - `2H`: Turn on at full power, turn off when released. (momentary turbo) + (in Simple UI, this uses the ceiling level instead of turbo) While the light is on, a few actions are available: @@ -235,23 +236,27 @@ While the light is on, a few actions are available: (or if it has regulated down, "bump" back up to turbo) (turbo level / behavior is configurable) - `1H`: Change brightness (up). - If the button was released less than a second ago, or if it's already - at the ceiling, it goes down instead. + If the button was released less than a second ago, + or if it's already at the ceiling, it goes down instead. - `2H`: Change brightness (down). - - `3C`: Switch to the other [ramp style](#ramping--stepped-ramping-modes). (smooth / stepped) - (or activate the next [channel mode](#channel-modes-aka-tint-ramping-or-multi-channel-controls), when more than one is enabled) + - `3C`: Switch to the other [ramp style](#ramping--stepped-ramping-modes). + (smooth / stepped) + (or activate the next [channel mode](#channel-modes), + when more than one is enabled) (then use 6C instead, for smooth / stepped toggle) - `6C`: Switch to the other ramp style. (when `3C` is mapped to next channel) - `3H`: Momentary turbo (when current channel has no tint to ramp). - - `3H`: [Tint ramping](#channel-modes-aka-tint-ramping-or-multi-channel-controls) (only when current channel has adjustable tint). + - `3H`: [Tint ramping](#channel-modes) + (only when current channel has adjustable tint). - `4H`: Momentary turbo, when `3H` is mapped to tint. - `4C`: Go to [lockout mode](#lockout-mode). - `5C`: Go to [momentary mode](#momentary-mode). - `5H`: Start a [sunset timer](#sunset-timer). + - `7H`: [Ramp config menu](#ramp-config-menu). - Item 1: Floor level. - Item 2: Ceiling level. @@ -265,7 +270,7 @@ While the light is on, a few actions are available: - `10C`: Activate manual memory and save the current brightness. Also saves current channel mode, on multi-channel lights. - - `10H`: Ramp extras config menu. + - `10H`: Ramp extras config menu. - Item 1: Disable manual memory and go back to automatic memory. (doesn't matter what value the user enters at the prompt) - Item 2: Configure the manual memory timer. @@ -388,7 +393,8 @@ lockout mode has two levels: (or the manual mem level, if there is one) - `3H`: Next channel mode (if more than one is enabled). - + + It is also possible to make the light lock itself automatically after being turned off. To enable this, go to lockout mode and use a `10H` action to activate the auto-lock config menu. Release the button after @@ -403,6 +409,7 @@ On lights which have aux LEDs, there may be additional functions: - `7C` / `7H`: Change Lockout Mode's [aux LED pattern](#aux-leds--button-leds). + Blinky / Utility Modes ---------------------- @@ -821,7 +828,7 @@ several formats: If the version doesn't include a model number, you may be able to find the model in the PRODUCTS file to see which firmware model it probably uses: - https://github.com/ToyKeeper/anduril/blob/trunk/MODELS + https://toykeeper.net/torches/PRODUCTS Protection Features @@ -931,6 +938,7 @@ lights. The number of settings in the Misc Config Menu depends on the hardware model and the firmware version. + Channel Modes (a.k.a. Tint Ramping or Multi Channel controls) ------------------------------------------------------------- @@ -979,9 +987,9 @@ smooth or stepped brightness ramp. Additionally, when a channel mode has nothing to adjust with `3H`, the `3H` action also reverts to its single-channel behavior -- momentary turbo. -The [Misc Config Menu](#misc-config-menu) (`Off -> 9H`) may also have a setting to choose a -tint ramp style. There are a few styles available, by entering -different numbers into that config menu: +The [Misc Config Menu](#misc-config-menu) (`Off -> 9H`) may also have +a setting to choose a tint ramp style. There are a few styles +available, by entering different numbers into that config menu: 0: smooth ramp 1: middle tint only -- cgit v1.2.3