From bad12d2b314a5b99e9045e4653263635bd1af906 Mon Sep 17 00:00:00 2001
From: dirtydancing
Date: Thu, 19 Dec 2024 19:12:16 +0100
Subject: Manual: Document extra digit for battery check

---
 docs/anduril-manual.md | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

(limited to 'docs')

diff --git a/docs/anduril-manual.md b/docs/anduril-manual.md
index cdf0dd1..245c90f 100644
--- a/docs/anduril-manual.md
+++ b/docs/anduril-manual.md
@@ -417,14 +417,28 @@ In more detail, this is what each blinky / utility mode does:
 
 ### Battery check:
 
-Blinks out the battery voltage per cell.  Full is 4.2V, empty is
-about 3.0V.  The light blinks the whole-number digit first, pauses,
-then blinks out the "tenths" digit.  Then a longer pause, and it
-repeats.
-So for 4.2V, it would be "blink-blink-blink-blink .. blink-blink".
+Blinks out the battery voltage per cell.  Full is 4.20V, empty is
+about 3.00V.  The light blinks the whole-number digit first, pauses,
+then blinks out the "tenths" digit, pauses, then blinks out the
+"hundredths" digit, in 0.02V steps.  Then a longer pause, and it
+repeats.  So for 4.16V, it would be "blink-blink-blink-blink .. blink
+.. blink-blink-blink-blink-blink-blink".
 
 A "zero" digit is represented by a very quick blink.
 
+The battery check format has changed a few times:
+
+ - For Anduril 2 from 2024-04 or later, the battery voltage resolution
+   is 0.02V steps (the last digit can be 0, 2, 4, 6, or 8).
+
+ - For Anduril 2 from 2023-12 or later, the battery voltage resolution
+   is 0.025V steps (the last digit can be 0, 2, 5, or 7).
+
+ - For Anduril 2 from 2023-12 or earlier, the battery voltage resolution
+   is 0.1V, so the light blinks the whole-number digit first, pauses,
+   then blinks out the "tenths" digit.  Then a longer pause, and it
+   repeats.
+
 On lights with more than one set of LEDs, pressing `3C` during batt
 check mode can select which set of LEDs (which channel mode) it uses
 to blink out numbers.
-- 
cgit v1.2.3