From 7b49797be1da97f54e9df3a1b0342ab20d7f02d5 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Wed, 27 Mar 2024 07:13:26 -0600
Subject: increased voltage precision from 0.025V to 0.02V (so 0 to 255 now
 goes from 0.00V to 5.10V)

---
 hw/thefreeman/avr32dd20-devkit/hwdef.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'hw/thefreeman/avr32dd20-devkit/hwdef.h')

diff --git a/hw/thefreeman/avr32dd20-devkit/hwdef.h b/hw/thefreeman/avr32dd20-devkit/hwdef.h
index 38b508d..5015c24 100644
--- a/hw/thefreeman/avr32dd20-devkit/hwdef.h
+++ b/hw/thefreeman/avr32dd20-devkit/hwdef.h
@@ -109,8 +109,8 @@ enum CHANNEL_MODES {
 // AVR datasheet table 3.1 I/O Multiplexing, PA6 ADC0 = AIN26
 #define USE_VOLTAGE_DIVIDER    // use a dedicated pin, not VCC, because VCC input is regulated
 #define ADMUX_VOLTAGE_DIVIDER  ADC_MUXPOS_AIN26_gc
-#define DUAL_VOLTAGE_FLOOR     (4*21) // for AA/14500 boost drivers, don't indicate low voltage if below this level
-#define DUAL_VOLTAGE_LOW_LOW   (4*7)  // the lower voltage range's danger zone 0.7 volts (NiMH)
+#define DUAL_VOLTAGE_FLOOR     (21*dV)  // for AA/14500 boost drivers, don't indicate low voltage if below this level
+#define DUAL_VOLTAGE_LOW_LOW   ( 7*dV)  // the lower voltage range's danger zone 0.7 volts (NiMH)
 // don't use the default VDD converter
 // convert BATT LVL pin readings to FSM volt units
 #undef voltage_raw2cooked
-- 
cgit v1.2.3