From 85454576e4a4823e4e3157e3ffdc3c336ed773c1 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Wed, 4 Jun 2025 01:12:23 -0600 Subject: renamed wurkkos-ts25-boost to wurkkos-ts26 (the product name changed upstream) --- hw/wurkkos/ts25/boost/anduril.h | 83 ------------------- hw/wurkkos/ts25/boost/hwdef.c | 101 ----------------------- hw/wurkkos/ts25/boost/hwdef.h | 174 ---------------------------------------- hw/wurkkos/ts25/boost/model | 1 - hw/wurkkos/ts26/anduril.h | 83 +++++++++++++++++++ hw/wurkkos/ts26/hwdef.c | 101 +++++++++++++++++++++++ hw/wurkkos/ts26/hwdef.h | 174 ++++++++++++++++++++++++++++++++++++++++ hw/wurkkos/ts26/model | 1 + 8 files changed, 359 insertions(+), 359 deletions(-) delete mode 100644 hw/wurkkos/ts25/boost/anduril.h delete mode 100644 hw/wurkkos/ts25/boost/hwdef.c delete mode 100644 hw/wurkkos/ts25/boost/hwdef.h delete mode 100644 hw/wurkkos/ts25/boost/model create mode 100644 hw/wurkkos/ts26/anduril.h create mode 100644 hw/wurkkos/ts26/hwdef.c create mode 100644 hw/wurkkos/ts26/hwdef.h create mode 100644 hw/wurkkos/ts26/model (limited to 'hw/wurkkos') diff --git a/hw/wurkkos/ts25/boost/anduril.h b/hw/wurkkos/ts25/boost/anduril.h deleted file mode 100644 index c4541d4..0000000 --- a/hw/wurkkos/ts25/boost/anduril.h +++ /dev/null @@ -1,83 +0,0 @@ -// Wurkkos TS25 Boost -// Copyright (C) 2023 Selene ToyKeeper -// SPDX-License-Identifier: GPL-3.0-or-later -#pragma once - -#define HWDEF_H wurkkos/ts25/boost/hwdef.h -#include "wurkkos/anduril.h" - -// this light has three aux LED channels: R, G, B -#define USE_AUX_RGB_LEDS - -// don't turn on the aux LEDs while main LEDs are on -#ifdef USE_INDICATOR_LED_WHILE_RAMPING -#undef USE_INDICATOR_LED_WHILE_RAMPING -#endif -// (nope, 20250210 prototype has front aux instead of RGB button) -// show real-time battery status on RGB button -// when main LEDs are bright enough to overpower the front aux -//#define USE_INDICATOR_LED_WHILE_RAMPING -//#define USE_AUX_RGB_LEDS_WHILE_ON 20 - - -#define RAMP_SIZE 150 - -// delta-sigma modulated PWM (0b0HHHHHHHHLLLLLLL = 0, 8xHigh, 7xLow bits) -// level_calc.py 5.01 1 150 7135 0 0.2 2000 --pwm 32640 -// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM) -#define PWM1_LEVELS 0,1,2,3,4,5,6,7,9,10,12,14,17,19,22,25,28,32,36,41,45,50,56,62,69,76,84,92,101,110,121,132,143,156,169,184,199,215,232,251,270,291,313,336,360,386,414,442,473,505,539,574,612,651,693,736,782,829,880,932,987,1045,1105,1168,1233,1302,1374,1449,1527,1608,1693,1781,1873,1969,2068,2172,2279,2391,2507,2628,2753,2883,3018,3158,3303,3454,3609,3771,3938,4111,4289,4475,4666,4864,5068,5280,5498,5724,5957,6197,6445,6701,6965,7237,7518,7808,8106,8413,8730,9056,9392,9737,10093,10459,10835,11223,11621,12031,12452,12884,13329,13786,14255,14737,15232,15741,16262,16798,17347,17911,18489,19082,19691,20314,20954,21609,22281,22969,23674,24397,25137,25895,26671,27465,28279,29111,29963,30835,31727,32640 -#define MIN_THERM_STEPDOWN 50 -#define DEFAULT_LEVEL 70 -#define MAX_1x7135 150 -// moon at 1/4th speed for max runtime -// the rest at full speed, to reduce PWM -// (speed changes make a big visible bump because PWM) -#define HALFSPEED_LEVEL 1 -#define QUARTERSPEED_LEVEL 1 - -#define RAMP_SMOOTH_FLOOR 1 -#define RAMP_SMOOTH_CEIL 150 -// 10, 30, 50, [70], 90, 110, 130 -#define RAMP_DISCRETE_FLOOR 10 -#define RAMP_DISCRETE_CEIL 130 -#define RAMP_DISCRETE_STEPS 7 - -// at Wurkkos's request, reduce the Simple UI ceiling a little bit -// 25 50 [75] 100 125 -#define SIMPLE_UI_FLOOR 25 -#define SIMPLE_UI_CEIL 125 -#define SIMPLE_UI_STEPS 5 - -// stop panicking at ~50% power -#define THERM_FASTER_LEVEL 120 // throttle back faster when high - -#define BLINK_BRIGHTNESS 30 -#define BLINK_ONCE_TIME 12 - -// show each channel while it scroll by in the menu -#define USE_CONFIG_COLORS - -// blink numbers on the main LEDs by default -// (so battcheck will be visible while charging) -#define DEFAULT_BLINK_CHANNEL CM_MAIN -// blink numbers on the aux LEDs by default -//#define DEFAULT_BLINK_CHANNEL CM_AUXWHT - -// slow down party strobe; this driver can't pulse for less than 2ms -#define PARTY_STROBE_ONTIME 2 -//#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses - -// use aux red + aux blue for police strobe -#define USE_POLICE_COLOR_STROBE_MODE -#define POLICE_STROBE_USES_AUX -#define POLICE_COLOR_STROBE_CH1 CM_AUXRED -#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU - -// the default of 26 looks a bit rough, so increase it to make it smoother -#define CANDLE_AMPLITUDE 33 - -// don't blink mid-ramp -#ifdef BLINK_AT_RAMP_MIDDLE -#undef BLINK_AT_RAMP_MIDDLE -#endif - diff --git a/hw/wurkkos/ts25/boost/hwdef.c b/hw/wurkkos/ts25/boost/hwdef.c deleted file mode 100644 index 4855e6a..0000000 --- a/hw/wurkkos/ts25/boost/hwdef.c +++ /dev/null @@ -1,101 +0,0 @@ -// Wurkkos TS25 Boost helper functions -// Copyright (C) 2023 Selene ToyKeeper -// SPDX-License-Identifier: GPL-3.0-or-later -#pragma once - -#include "fsm/chan-rgbaux.c" - - -void set_level_zero(); - -void set_level_main(uint8_t level); -bool gradual_tick_main(uint8_t gt); - - -Channel channels[] = { - { // channel 1 only - .set_level = set_level_main, - .gradual_tick = gradual_tick_main - }, - RGB_AUX_CHANNELS -}; - - -void set_level_zero() { - // disable timer overflow interrupt - // (helps improve button press handling from Off state) - DSM_INTCTRL = 0; - - // turn off all LEDs - ch1_dsm_lvl = 0; - CH1_PWM = 0; - PWM_CNT = 0; // reset phase - CH1_ENABLE_PORT &= ~(1 << CH1_ENABLE_PIN); // disable regulator -} - -// single set of LEDs with single power channel, boost -void set_level_main(uint8_t level) { - if (level == actual_level - 1) return; // prevent flicker on no-op - - PWM_DATATYPE ch1 = PWM_GET(pwm1_levels, level); - - // set delta-sigma soft levels - ch1_dsm_lvl = ch1; - - // set hardware PWM levels and init dsm loop - CH1_PWM = ch1_pwm = ch1 >> 7; - - // enable timer overflow interrupt so DSM can work - DSM_INTCTRL = DSM_OVF_bm; - - // force reset phase when turning on from zero - // (because otherwise the initial response is inconsistent) - if (! actual_level) PWM_CNT = 0; - - CH1_ENABLE_PORT |= (1 << CH1_ENABLE_PIN); // enable regulator -} - -// delta-sigma modulation of PWM outputs -// happens on each Timer overflow (every 512 cpu clock cycles) -// uses 8-bit pwm w/ 7-bit dsm (0b 0PPP PPPP PDDD DDDD) -ISR(DSM_vect) { - // set new hardware values first, - // for best timing (reduce effect of interrupt jitter) - CH1_PWM = ch1_pwm; - - // calculate next values, now that timing matters less - - // accumulate error - ch1_dsm += (ch1_dsm_lvl & 0x007f); - // next PWM = base PWM value + carry bit - ch1_pwm = (ch1_dsm_lvl >> 7) + (ch1_dsm > 0x7f); - // clear carry bit - ch1_dsm &= 0x7f; - - // clear the interrupt flag to indicate it was handled - // as per: https://onlinedocs.microchip.com/pr/GUID-C37FFBA8-82C6-4339-A2B1-ABD9A0F6C162-en-US-8/index.html?GUID-C2A2BEFD-158F-413D-B9D4-0F0556AA79BD - DSM_INTFLAGS = DSM_OVF_bm; -} - - -bool gradual_tick_main(uint8_t gt) { - PWM_DATATYPE ch1 = PWM_GET(pwm1_levels, gt); - - // adjust multiple times based on current brightness - // (so it adjusts faster/coarser when bright, slower/finer when dim) - - // higher shift = slower/finer adjustments - const uint8_t shift = 9; // ((255 << 7) >> 9) = 63 max - uint8_t steps; - - steps = ch1_dsm_lvl >> shift; - for (uint8_t i=0; i<=steps; i++) - GRADUAL_ADJUST_SIMPLE(ch1, ch1_dsm_lvl); - - if ((ch1 == ch1_dsm_lvl) - ) { - return true; // done - } - return false; // not done yet -} - diff --git a/hw/wurkkos/ts25/boost/hwdef.h b/hw/wurkkos/ts25/boost/hwdef.h deleted file mode 100644 index d645ded..0000000 --- a/hw/wurkkos/ts25/boost/hwdef.h +++ /dev/null @@ -1,174 +0,0 @@ -// Wurkkos TS25 driver layout -// Copyright (C) 2023 Selene ToyKeeper -// SPDX-License-Identifier: GPL-3.0-or-later -#pragma once - -/* Boost driver based on MP3432 and attiny1616 - * with high dynamic range and DAC control, AUX : RGB + button - * hardware version : 2.0+ - * compatible with BST20-FWxA v1.0 (no button LED A) - * - * Pin / Name / Function - * 1 PA2 - - * 2 PA3 - - * 3 GND GND - * 4 VCC VCC - * 5 PA4 - - * 6 PA5 e-switch - * 7 PA6 - - * 8 PA7 - - * 9 PB5 - - * 10 PB4 - - * 11 PB3 - - * 12 PB2 EN: boost enable - * 13 PB1 - - * 14 PB0 PWM - * 15 PC0 - - * 16 PC1 B: aux blue - * 17 PC2 G: aux green - * 18 PC3 R: aux red - * 19 PA0 UDPI - * 20 PA1 Vbat sense (voltage divider) - * - */ - -#define HWDEF_C wurkkos/ts25/boost/hwdef.c - -// allow using aux LEDs as extra channel modes -#include "fsm/chan-rgbaux.h" - -// channel modes: -// * 0. main LEDs -// * 1+. aux RGB -#define NUM_CHANNEL_MODES (1 + NUM_RGB_AUX_CHANNEL_MODES) -enum CHANNEL_MODES { - CM_MAIN = 0, - RGB_AUX_ENUMS -}; - -#define DEFAULT_CHANNEL_MODE CM_MAIN - -// right-most bit first, modes are in fedcba9876543210 order -#define CHANNEL_MODES_ENABLED 0b0000000000000001 - - -#define PWM_BITS 16 // 0 to 32640 (0 to 255 PWM + 0 to 127 DSM) at constant kHz -#define PWM_GET PWM_GET16 -#define PWM_DATATYPE uint16_t -#define PWM_DATATYPE2 uint32_t // only needs 32-bit if ramp values go over 255 -#define PWM1_DATATYPE uint16_t // 15-bit PWM+DSM ramp - -#define PWM_TOP TCA0.SINGLE.PERBUF // holds the TOP value for for variable-resolution PWM -#define PWM_TOP_INIT 255 -#define PWM_CNT TCA0.SINGLE.CNT // for checking / resetting phase -// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM) -#define DSM_TOP (255<<7) // 15-bit resolution leaves 1 bit for carry - -// timer interrupt for DSM -#define DSM_vect TCA0_OVF_vect -#define DSM_INTCTRL TCA0.SINGLE.INTCTRL -#define DSM_INTFLAGS TCA0.SINGLE.INTFLAGS -#define DSM_OVF_bm TCA_SINGLE_OVF_bm - -#define DELAY_FACTOR 90 // less time in delay() because more time spent in interrupts - -// regulated channel -uint16_t ch1_dsm_lvl; -uint8_t ch1_pwm, ch1_dsm; -#define CH1_PIN PB0 -#define CH1_PWM TCA0.SINGLE.CMP0BUF // CMP0 is the output compare register for PB0 - -#define CH1_ENABLE_PIN PIN2_bp -#define CH1_ENABLE_PORT PORTB_OUT - -// e-switch -#define SWITCH_PIN PIN5_bp -#define SWITCH_PORT VPORTA.IN -#define SWITCH_ISC_REG PORTA.PIN2CTRL -#define SWITCH_VECT PORTA_PORT_vect -#define SWITCH_INTFLG VPORTA.INTFLAGS - -// Voltage divider battLVL -#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is regulated -#define ADMUX_VOLTAGE_DIVIDER ADC_MUXPOS_AIN1_gc // which ADC channel to read -// don't use the default VDD converter -#undef voltage_raw2cooked -#define voltage_raw2cooked mcu_vdivider_raw2cooked - -// Raw ADC readings at 4.4V and 2.2V -// calibrate the voltage readout here -// estimated / calculated values are: -// (voltage - D1) * (R2/(R2+R1) * 4096 / 1.1) -// Resistors are 330k and 100k -#define ADC_44 4095 // raw value at 4.40V -#define ADC_22 2048 // raw value at 2.20V - -// this light has aux LEDs under the optic -#define AUXLED_R_PIN PIN3_bp // pin 3 -#define AUXLED_G_PIN PIN2_bp // pin 2 -#define AUXLED_B_PIN PIN1_bp // pin 1 -#define AUXLED_RGB_PORT PORTC // PORTA or PORTB or PORTC - -// this light has three aux LED channels: R, G, B -#define USE_AUX_RGB_LEDS - - -inline void hwdef_setup() { - - mcu_clock_speed(); - - // Outputs: - //VPORTA.DIR = ...; - VPORTB.DIR = PIN0_bm // PWM - | PIN2_bm; // boost enable - VPORTC.DIR = PIN1_bm // aux B - | PIN2_bm // aux G - | PIN3_bm; // aux R - - // enable pullups on the unused pins to reduce power - PORTA.PIN0CTRL = PORT_PULLUPEN_bm; - //PORTA.PIN1CTRL = PORT_PULLUPEN_bm; // Vbat sense - PORTA.PIN2CTRL = PORT_PULLUPEN_bm; - PORTA.PIN3CTRL = PORT_PULLUPEN_bm; - PORTA.PIN4CTRL = PORT_PULLUPEN_bm; - PORTA.PIN5CTRL = PORT_PULLUPEN_bm | PORT_ISC_BOTHEDGES_gc; // eSwitch - PORTA.PIN6CTRL = PORT_PULLUPEN_bm; - PORTA.PIN7CTRL = PORT_PULLUPEN_bm; - - //PORTB.PIN0CTRL = PORT_PULLUPEN_bm; // regulated channel - PORTB.PIN1CTRL = PORT_PULLUPEN_bm; - //PORTB.PIN2CTRL = PORT_PULLUPEN_bm; // boost enable - PORTB.PIN3CTRL = PORT_PULLUPEN_bm; - PORTB.PIN4CTRL = PORT_PULLUPEN_bm; - PORTB.PIN5CTRL = PORT_PULLUPEN_bm; - - PORTC.PIN0CTRL = PORT_PULLUPEN_bm; - //PORTC.PIN1CTRL = PORT_PULLUPEN_bm; // RGB Aux - //PORTC.PIN2CTRL = PORT_PULLUPEN_bm; // RGB Aux - //PORTC.PIN3CTRL = PORT_PULLUPEN_bm; // RGB Aux - - // set up the PWM - // https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny1614-16-17-DataSheet-DS40002204A.pdf - // PB0 is TCA0:WO0, use TCA_SINGLE_CMP0EN_bm - // PB1 is TCA0:WO1, use TCA_SINGLE_CMP1EN_bm - // PB2 is TCA0:WO2, use TCA_SINGLE_CMP2EN_bm - // For Fast (Single Slope) PWM use TCA_SINGLE_WGMODE_SINGLESLOPE_gc - // For Phase Correct (Dual Slope) PWM use TCA_SINGLE_WGMODE_DSBOTTOM_gc - // See the manual for other pins, clocks, configs, portmux, etc - TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm - //| TCA_SINGLE_CMP1EN_bm - | TCA_SINGLE_WGMODE_DSBOTTOM_gc; - TCA0.SINGLE.CTRLA = TCA_SINGLE_CLKSEL_DIV1_gc - | TCA_SINGLE_ENABLE_bm; - - PWM_TOP = PWM_TOP_INIT; - - // set up interrupt for delta-sigma modulation - // (moved to hwdef.c functions so it can be enabled/disabled based on ramp level) - //DSM_INTCTRL |= DSM_OVF_bm; // interrupt once for each timer cycle - -} - - -#define LAYOUT_DEFINED - diff --git a/hw/wurkkos/ts25/boost/model b/hw/wurkkos/ts25/boost/model deleted file mode 100644 index 028b833..0000000 --- a/hw/wurkkos/ts25/boost/model +++ /dev/null @@ -1 +0,0 @@ -0721 diff --git a/hw/wurkkos/ts26/anduril.h b/hw/wurkkos/ts26/anduril.h new file mode 100644 index 0000000..e1c2e33 --- /dev/null +++ b/hw/wurkkos/ts26/anduril.h @@ -0,0 +1,83 @@ +// Wurkkos TS26 +// Copyright (C) 2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +#define HWDEF_H wurkkos/ts26/hwdef.h +#include "wurkkos/anduril.h" + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS + +// don't turn on the aux LEDs while main LEDs are on +#ifdef USE_INDICATOR_LED_WHILE_RAMPING +#undef USE_INDICATOR_LED_WHILE_RAMPING +#endif +// (nope, 20250210 prototype has front aux instead of RGB button) +// show real-time battery status on RGB button +// when main LEDs are bright enough to overpower the front aux +//#define USE_INDICATOR_LED_WHILE_RAMPING +//#define USE_AUX_RGB_LEDS_WHILE_ON 20 + + +#define RAMP_SIZE 150 + +// delta-sigma modulated PWM (0b0HHHHHHHHLLLLLLL = 0, 8xHigh, 7xLow bits) +// level_calc.py 5.01 1 150 7135 0 0.2 2000 --pwm 32640 +// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM) +#define PWM1_LEVELS 0,1,2,3,4,5,6,7,9,10,12,14,17,19,22,25,28,32,36,41,45,50,56,62,69,76,84,92,101,110,121,132,143,156,169,184,199,215,232,251,270,291,313,336,360,386,414,442,473,505,539,574,612,651,693,736,782,829,880,932,987,1045,1105,1168,1233,1302,1374,1449,1527,1608,1693,1781,1873,1969,2068,2172,2279,2391,2507,2628,2753,2883,3018,3158,3303,3454,3609,3771,3938,4111,4289,4475,4666,4864,5068,5280,5498,5724,5957,6197,6445,6701,6965,7237,7518,7808,8106,8413,8730,9056,9392,9737,10093,10459,10835,11223,11621,12031,12452,12884,13329,13786,14255,14737,15232,15741,16262,16798,17347,17911,18489,19082,19691,20314,20954,21609,22281,22969,23674,24397,25137,25895,26671,27465,28279,29111,29963,30835,31727,32640 +#define MIN_THERM_STEPDOWN 50 +#define DEFAULT_LEVEL 70 +#define MAX_1x7135 150 +// moon at 1/4th speed for max runtime +// the rest at full speed, to reduce PWM +// (speed changes make a big visible bump because PWM) +#define HALFSPEED_LEVEL 1 +#define QUARTERSPEED_LEVEL 1 + +#define RAMP_SMOOTH_FLOOR 1 +#define RAMP_SMOOTH_CEIL 150 +// 10, 30, 50, [70], 90, 110, 130 +#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_DISCRETE_CEIL 130 +#define RAMP_DISCRETE_STEPS 7 + +// at Wurkkos's request, reduce the Simple UI ceiling a little bit +// 25 50 [75] 100 125 +#define SIMPLE_UI_FLOOR 25 +#define SIMPLE_UI_CEIL 125 +#define SIMPLE_UI_STEPS 5 + +// stop panicking at ~50% power +#define THERM_FASTER_LEVEL 120 // throttle back faster when high + +#define BLINK_BRIGHTNESS 30 +#define BLINK_ONCE_TIME 12 + +// show each channel while it scroll by in the menu +#define USE_CONFIG_COLORS + +// blink numbers on the main LEDs by default +// (so battcheck will be visible while charging) +#define DEFAULT_BLINK_CHANNEL CM_MAIN +// blink numbers on the aux LEDs by default +//#define DEFAULT_BLINK_CHANNEL CM_AUXWHT + +// slow down party strobe; this driver can't pulse for less than 2ms +#define PARTY_STROBE_ONTIME 2 +//#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses + +// use aux red + aux blue for police strobe +#define USE_POLICE_COLOR_STROBE_MODE +#define POLICE_STROBE_USES_AUX +#define POLICE_COLOR_STROBE_CH1 CM_AUXRED +#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU + +// the default of 26 looks a bit rough, so increase it to make it smoother +#define CANDLE_AMPLITUDE 33 + +// don't blink mid-ramp +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + diff --git a/hw/wurkkos/ts26/hwdef.c b/hw/wurkkos/ts26/hwdef.c new file mode 100644 index 0000000..e6c77a2 --- /dev/null +++ b/hw/wurkkos/ts26/hwdef.c @@ -0,0 +1,101 @@ +// Wurkkos TS26 helper functions +// Copyright (C) 2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +#include "fsm/chan-rgbaux.c" + + +void set_level_zero(); + +void set_level_main(uint8_t level); +bool gradual_tick_main(uint8_t gt); + + +Channel channels[] = { + { // channel 1 only + .set_level = set_level_main, + .gradual_tick = gradual_tick_main + }, + RGB_AUX_CHANNELS +}; + + +void set_level_zero() { + // disable timer overflow interrupt + // (helps improve button press handling from Off state) + DSM_INTCTRL = 0; + + // turn off all LEDs + ch1_dsm_lvl = 0; + CH1_PWM = 0; + PWM_CNT = 0; // reset phase + CH1_ENABLE_PORT &= ~(1 << CH1_ENABLE_PIN); // disable regulator +} + +// single set of LEDs with single power channel, boost +void set_level_main(uint8_t level) { + if (level == actual_level - 1) return; // prevent flicker on no-op + + PWM_DATATYPE ch1 = PWM_GET(pwm1_levels, level); + + // set delta-sigma soft levels + ch1_dsm_lvl = ch1; + + // set hardware PWM levels and init dsm loop + CH1_PWM = ch1_pwm = ch1 >> 7; + + // enable timer overflow interrupt so DSM can work + DSM_INTCTRL = DSM_OVF_bm; + + // force reset phase when turning on from zero + // (because otherwise the initial response is inconsistent) + if (! actual_level) PWM_CNT = 0; + + CH1_ENABLE_PORT |= (1 << CH1_ENABLE_PIN); // enable regulator +} + +// delta-sigma modulation of PWM outputs +// happens on each Timer overflow (every 512 cpu clock cycles) +// uses 8-bit pwm w/ 7-bit dsm (0b 0PPP PPPP PDDD DDDD) +ISR(DSM_vect) { + // set new hardware values first, + // for best timing (reduce effect of interrupt jitter) + CH1_PWM = ch1_pwm; + + // calculate next values, now that timing matters less + + // accumulate error + ch1_dsm += (ch1_dsm_lvl & 0x007f); + // next PWM = base PWM value + carry bit + ch1_pwm = (ch1_dsm_lvl >> 7) + (ch1_dsm > 0x7f); + // clear carry bit + ch1_dsm &= 0x7f; + + // clear the interrupt flag to indicate it was handled + // as per: https://onlinedocs.microchip.com/pr/GUID-C37FFBA8-82C6-4339-A2B1-ABD9A0F6C162-en-US-8/index.html?GUID-C2A2BEFD-158F-413D-B9D4-0F0556AA79BD + DSM_INTFLAGS = DSM_OVF_bm; +} + + +bool gradual_tick_main(uint8_t gt) { + PWM_DATATYPE ch1 = PWM_GET(pwm1_levels, gt); + + // adjust multiple times based on current brightness + // (so it adjusts faster/coarser when bright, slower/finer when dim) + + // higher shift = slower/finer adjustments + const uint8_t shift = 9; // ((255 << 7) >> 9) = 63 max + uint8_t steps; + + steps = ch1_dsm_lvl >> shift; + for (uint8_t i=0; i<=steps; i++) + GRADUAL_ADJUST_SIMPLE(ch1, ch1_dsm_lvl); + + if ((ch1 == ch1_dsm_lvl) + ) { + return true; // done + } + return false; // not done yet +} + diff --git a/hw/wurkkos/ts26/hwdef.h b/hw/wurkkos/ts26/hwdef.h new file mode 100644 index 0000000..391994e --- /dev/null +++ b/hw/wurkkos/ts26/hwdef.h @@ -0,0 +1,174 @@ +// Wurkkos TS26 driver layout +// Copyright (C) 2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +/* Boost driver based on MP3432 and attiny1616 + * with high dynamic range and DAC control, AUX : RGB + button + * hardware version : 2.0+ + * compatible with BST20-FWxA v1.0 (no button LED A) + * + * Pin / Name / Function + * 1 PA2 - + * 2 PA3 - + * 3 GND GND + * 4 VCC VCC + * 5 PA4 - + * 6 PA5 e-switch + * 7 PA6 - + * 8 PA7 - + * 9 PB5 - + * 10 PB4 - + * 11 PB3 - + * 12 PB2 EN: boost enable + * 13 PB1 - + * 14 PB0 PWM + * 15 PC0 - + * 16 PC1 B: aux blue + * 17 PC2 G: aux green + * 18 PC3 R: aux red + * 19 PA0 UDPI + * 20 PA1 Vbat sense (voltage divider) + * + */ + +#define HWDEF_C wurkkos/ts26/hwdef.c + +// allow using aux LEDs as extra channel modes +#include "fsm/chan-rgbaux.h" + +// channel modes: +// * 0. main LEDs +// * 1+. aux RGB +#define NUM_CHANNEL_MODES (1 + NUM_RGB_AUX_CHANNEL_MODES) +enum CHANNEL_MODES { + CM_MAIN = 0, + RGB_AUX_ENUMS +}; + +#define DEFAULT_CHANNEL_MODE CM_MAIN + +// right-most bit first, modes are in fedcba9876543210 order +#define CHANNEL_MODES_ENABLED 0b0000000000000001 + + +#define PWM_BITS 16 // 0 to 32640 (0 to 255 PWM + 0 to 127 DSM) at constant kHz +#define PWM_GET PWM_GET16 +#define PWM_DATATYPE uint16_t +#define PWM_DATATYPE2 uint32_t // only needs 32-bit if ramp values go over 255 +#define PWM1_DATATYPE uint16_t // 15-bit PWM+DSM ramp + +#define PWM_TOP TCA0.SINGLE.PERBUF // holds the TOP value for for variable-resolution PWM +#define PWM_TOP_INIT 255 +#define PWM_CNT TCA0.SINGLE.CNT // for checking / resetting phase +// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM) +#define DSM_TOP (255<<7) // 15-bit resolution leaves 1 bit for carry + +// timer interrupt for DSM +#define DSM_vect TCA0_OVF_vect +#define DSM_INTCTRL TCA0.SINGLE.INTCTRL +#define DSM_INTFLAGS TCA0.SINGLE.INTFLAGS +#define DSM_OVF_bm TCA_SINGLE_OVF_bm + +#define DELAY_FACTOR 90 // less time in delay() because more time spent in interrupts + +// regulated channel +uint16_t ch1_dsm_lvl; +uint8_t ch1_pwm, ch1_dsm; +#define CH1_PIN PB0 +#define CH1_PWM TCA0.SINGLE.CMP0BUF // CMP0 is the output compare register for PB0 + +#define CH1_ENABLE_PIN PIN2_bp +#define CH1_ENABLE_PORT PORTB_OUT + +// e-switch +#define SWITCH_PIN PIN5_bp +#define SWITCH_PORT VPORTA.IN +#define SWITCH_ISC_REG PORTA.PIN2CTRL +#define SWITCH_VECT PORTA_PORT_vect +#define SWITCH_INTFLG VPORTA.INTFLAGS + +// Voltage divider battLVL +#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is regulated +#define ADMUX_VOLTAGE_DIVIDER ADC_MUXPOS_AIN1_gc // which ADC channel to read +// don't use the default VDD converter +#undef voltage_raw2cooked +#define voltage_raw2cooked mcu_vdivider_raw2cooked + +// Raw ADC readings at 4.4V and 2.2V +// calibrate the voltage readout here +// estimated / calculated values are: +// (voltage - D1) * (R2/(R2+R1) * 4096 / 1.1) +// Resistors are 330k and 100k +#define ADC_44 4095 // raw value at 4.40V +#define ADC_22 2048 // raw value at 2.20V + +// this light has aux LEDs under the optic +#define AUXLED_R_PIN PIN3_bp // pin 3 +#define AUXLED_G_PIN PIN2_bp // pin 2 +#define AUXLED_B_PIN PIN1_bp // pin 1 +#define AUXLED_RGB_PORT PORTC // PORTA or PORTB or PORTC + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS + + +inline void hwdef_setup() { + + mcu_clock_speed(); + + // Outputs: + //VPORTA.DIR = ...; + VPORTB.DIR = PIN0_bm // PWM + | PIN2_bm; // boost enable + VPORTC.DIR = PIN1_bm // aux B + | PIN2_bm // aux G + | PIN3_bm; // aux R + + // enable pullups on the unused pins to reduce power + PORTA.PIN0CTRL = PORT_PULLUPEN_bm; + //PORTA.PIN1CTRL = PORT_PULLUPEN_bm; // Vbat sense + PORTA.PIN2CTRL = PORT_PULLUPEN_bm; + PORTA.PIN3CTRL = PORT_PULLUPEN_bm; + PORTA.PIN4CTRL = PORT_PULLUPEN_bm; + PORTA.PIN5CTRL = PORT_PULLUPEN_bm | PORT_ISC_BOTHEDGES_gc; // eSwitch + PORTA.PIN6CTRL = PORT_PULLUPEN_bm; + PORTA.PIN7CTRL = PORT_PULLUPEN_bm; + + //PORTB.PIN0CTRL = PORT_PULLUPEN_bm; // regulated channel + PORTB.PIN1CTRL = PORT_PULLUPEN_bm; + //PORTB.PIN2CTRL = PORT_PULLUPEN_bm; // boost enable + PORTB.PIN3CTRL = PORT_PULLUPEN_bm; + PORTB.PIN4CTRL = PORT_PULLUPEN_bm; + PORTB.PIN5CTRL = PORT_PULLUPEN_bm; + + PORTC.PIN0CTRL = PORT_PULLUPEN_bm; + //PORTC.PIN1CTRL = PORT_PULLUPEN_bm; // RGB Aux + //PORTC.PIN2CTRL = PORT_PULLUPEN_bm; // RGB Aux + //PORTC.PIN3CTRL = PORT_PULLUPEN_bm; // RGB Aux + + // set up the PWM + // https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny1614-16-17-DataSheet-DS40002204A.pdf + // PB0 is TCA0:WO0, use TCA_SINGLE_CMP0EN_bm + // PB1 is TCA0:WO1, use TCA_SINGLE_CMP1EN_bm + // PB2 is TCA0:WO2, use TCA_SINGLE_CMP2EN_bm + // For Fast (Single Slope) PWM use TCA_SINGLE_WGMODE_SINGLESLOPE_gc + // For Phase Correct (Dual Slope) PWM use TCA_SINGLE_WGMODE_DSBOTTOM_gc + // See the manual for other pins, clocks, configs, portmux, etc + TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm + //| TCA_SINGLE_CMP1EN_bm + | TCA_SINGLE_WGMODE_DSBOTTOM_gc; + TCA0.SINGLE.CTRLA = TCA_SINGLE_CLKSEL_DIV1_gc + | TCA_SINGLE_ENABLE_bm; + + PWM_TOP = PWM_TOP_INIT; + + // set up interrupt for delta-sigma modulation + // (moved to hwdef.c functions so it can be enabled/disabled based on ramp level) + //DSM_INTCTRL |= DSM_OVF_bm; // interrupt once for each timer cycle + +} + + +#define LAYOUT_DEFINED + diff --git a/hw/wurkkos/ts26/model b/hw/wurkkos/ts26/model new file mode 100644 index 0000000..028b833 --- /dev/null +++ b/hw/wurkkos/ts26/model @@ -0,0 +1 @@ +0721 -- cgit v1.2.3