From 583854e37efde7f461e073e735a1736b02d28c70 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Mon, 17 Apr 2023 00:08:32 -0600
Subject: switched the rest of FSM + Anduril to use SPDX license headers
 instead of full GPL headers (or all too often, nothing at all)

There are a few "FIXME" entries where I'm not sure about the correct copyright.

---
 hwdef-BLF_GT.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'hwdef-BLF_GT.h')

diff --git a/hwdef-BLF_GT.h b/hwdef-BLF_GT.h
index 51b391d..94d510c 100644
--- a/hwdef-BLF_GT.h
+++ b/hwdef-BLF_GT.h
@@ -1,7 +1,9 @@
-#ifndef HWDEF_BLF_GT_H
-#define HWDEF_BLF_GT_H
+// BLF GT driver layout
+// Copyright (C) 2018-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
 
-/* BLF GT driver layout
+/*
  *           ----
  *   Reset -|1  8|- VCC (unused)
  * eswitch -|2  7|- Voltage divider
@@ -57,4 +59,3 @@
 
 #define LAYOUT_DEFINED
 
-#endif
-- 
cgit v1.2.3


From 9f5be1da4a3f01c4891f1f1b1372a603638da37b Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Sun, 23 Jul 2023 12:04:56 -0600
Subject: converted BLF GT to multi-channel

---
 hwdef-BLF_GT.h | 61 ----------------------------------------------------------
 1 file changed, 61 deletions(-)
 delete mode 100644 hwdef-BLF_GT.h

(limited to 'hwdef-BLF_GT.h')

diff --git a/hwdef-BLF_GT.h b/hwdef-BLF_GT.h
deleted file mode 100644
index 94d510c..0000000
--- a/hwdef-BLF_GT.h
+++ /dev/null
@@ -1,61 +0,0 @@
-// BLF GT driver layout
-// Copyright (C) 2018-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-/*
- *           ----
- *   Reset -|1  8|- VCC (unused)
- * eswitch -|2  7|- Voltage divider
- * AUX LED -|3  6|- Current control (buck level)
- *     GND -|4  5|- PWM (buck output on/off)
- *           ----
- */
-
-#define PWM_CHANNELS 2
-
-#ifndef AUXLED_PIN
-#define AUXLED_PIN   PB4    // pin 3
-#endif
-
-#ifndef SWITCH_PIN
-#define SWITCH_PIN   PB3    // pin 2
-#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
-#endif
-
-#ifndef PWM1_PIN
-#define PWM1_PIN PB0        // pin 5, 1x7135 PWM
-#define PWM1_LVL OCR0A      // OCR0A is the output compare register for PB0
-#endif
-#ifndef PWM2_PIN
-#define PWM2_PIN PB1        // pin 6, FET PWM
-#define PWM2_LVL OCR0B      // OCR0B is the output compare register for PB1
-#endif
-
-#define USE_VOLTAGE_DIVIDER // use a voltage divider on pin 7, not VCC
-#ifndef VOLTAGE_PIN
-#define VOLTAGE_PIN PB2     // pin 7, voltage ADC
-#define VOLTAGE_CHANNEL 0x01 // MUX 01 corresponds with PB2
-#define VOLTAGE_ADC ADC1D  // Digital input disable bit corresponding with PB2
-// inherited from tk-attiny.h
-//#define VOLTAGE_ADC_DIDR DIDR0  // DIDR for ADC1
-// 1.1V reference, left-adjust, ADC1/PB2
-//#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | (1 << ADLAR) | VOLTAGE_CHANNEL)
-// 1.1V reference, no left-adjust, ADC1/PB2
-#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | VOLTAGE_CHANNEL)
-#endif
-#define ADC_PRSCL   0x07    // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V (in-between, we assume values form a straight line)
-#ifndef ADC_44
-#define ADC_44 (184*4)
-#endif
-#ifndef ADC_22
-#define ADC_22 (92*4)
-#endif
-
-#define FAST 0xA3           // fast PWM both channels
-#define PHASE 0xA1          // phase-correct PWM both channels
-
-#define LAYOUT_DEFINED
-
-- 
cgit v1.2.3