From 583854e37efde7f461e073e735a1736b02d28c70 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Mon, 17 Apr 2023 00:08:32 -0600
Subject: switched the rest of FSM + Anduril to use SPDX license headers
 instead of full GPL headers (or all too often, nothing at all)

There are a few "FIXME" entries where I'm not sure about the correct copyright.

---
 hwdef-Emisar_D4.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'hwdef-Emisar_D4.h')

diff --git a/hwdef-Emisar_D4.h b/hwdef-Emisar_D4.h
index d062d6f..fdb42a1 100644
--- a/hwdef-Emisar_D4.h
+++ b/hwdef-Emisar_D4.h
@@ -1,7 +1,9 @@
-#ifndef HWDEF_EMISAR_D4_H
-#define HWDEF_EMISAR_D4_H
+// Emisar D4 driver layout
+// Copyright (C) 2017-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
 
-/* Emisar D4 driver layout
+/*
  *           ----
  *   Reset -|1  8|- VCC
  * eswitch -|2  7|-
@@ -44,4 +46,3 @@
 #define FAST 0xA3           // fast PWM both channels
 #define PHASE 0xA1          // phase-correct PWM both channels
 
-#endif
-- 
cgit v1.2.3


From 6c7c99b1be9a684e3a6ccc533f46979b39f7a529 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Tue, 18 Jul 2023 14:44:40 -0600
Subject: converted Emisar D4 and BLF Q8 to multi-channel, and enabled
 previously-removed tactical mode on the Q8 since there seems to be enough
 space now (also lowercased their hwdef files)

---
 hwdef-Emisar_D4.h | 48 ------------------------------------------------
 1 file changed, 48 deletions(-)
 delete mode 100644 hwdef-Emisar_D4.h

(limited to 'hwdef-Emisar_D4.h')

diff --git a/hwdef-Emisar_D4.h b/hwdef-Emisar_D4.h
deleted file mode 100644
index fdb42a1..0000000
--- a/hwdef-Emisar_D4.h
+++ /dev/null
@@ -1,48 +0,0 @@
-// Emisar D4 driver layout
-// Copyright (C) 2017-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-/*
- *           ----
- *   Reset -|1  8|- VCC
- * eswitch -|2  7|-
- * AUX LED -|3  6|- PWM (FET)
- *     GND -|4  5|- PWM (1x7135)
- *           ----
- */
-
-#define LAYOUT_DEFINED
-
-#define PWM_CHANNELS 2
-
-//#define AUXLED_PIN   PB4    // pin 3
-
-#ifndef SWITCH_PIN
-#define SWITCH_PIN   PB3    // pin 2
-#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
-#endif
-
-#ifndef PWM1_PIN
-#define PWM1_PIN PB0        // pin 5, 1x7135 PWM
-#define PWM1_LVL OCR0A      // OCR0A is the output compare register for PB0
-#endif
-#ifndef PWM2_PIN
-#define PWM2_PIN PB1        // pin 6, FET PWM
-#define PWM2_LVL OCR0B      // OCR0B is the output compare register for PB1
-#endif
-
-// (FIXME: remove?  not used?)
-//#define VOLTAGE_PIN PB2     // pin 7, voltage ADC
-//#define ADC_CHANNEL 0x01    // MUX 01 corresponds with PB2
-//#define ADC_DIDR    ADC1D   // Digital input disable bit corresponding with PB2
-#define ADC_PRSCL   0x07    // clk/128
-
-// average drop across diode on this hardware
-#ifndef VOLTAGE_FUDGE_FACTOR
-#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V
-#endif
-
-#define FAST 0xA3           // fast PWM both channels
-#define PHASE 0xA1          // phase-correct PWM both channels
-
-- 
cgit v1.2.3