From 75afd1d8843ec8d6f0cf46acb0d4a33c733ae3cc Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Thu, 9 May 2019 23:59:35 -0600
Subject: Added Mateminco MF01S build target.

---
 hwdef-Mateminco_MF01S.h | 60 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 hwdef-Mateminco_MF01S.h

(limited to 'hwdef-Mateminco_MF01S.h')

diff --git a/hwdef-Mateminco_MF01S.h b/hwdef-Mateminco_MF01S.h
new file mode 100644
index 0000000..ab1c5bf
--- /dev/null
+++ b/hwdef-Mateminco_MF01S.h
@@ -0,0 +1,60 @@
+#ifndef HWDEF_MF01S_H
+#define HWDEF_MF01S_H
+
+/* MF01S driver layout
+ *           ----
+ *   Reset -|1  8|- VCC (unused)
+ * eswitch -|2  7|- Voltage divider (2S)
+ * AUX LED -|3  6|- PWM (FET)
+ *     GND -|4  5|- PWM (smaller FET)
+ *           ----
+ */
+
+#define PWM_CHANNELS 2
+
+#ifndef AUXLED_PIN
+#define AUXLED_PIN   PB4    // pin 3
+#endif
+
+#ifndef SWITCH_PIN
+#define SWITCH_PIN   PB3    // pin 2
+#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
+#endif
+
+#ifndef PWM1_PIN
+#define PWM1_PIN PB0        // pin 5, 1x7135 PWM
+#define PWM1_LVL OCR0A      // OCR0A is the output compare register for PB0
+#endif
+#ifndef PWM2_PIN
+#define PWM2_PIN PB1        // pin 6, FET PWM
+#define PWM2_LVL OCR0B      // OCR0B is the output compare register for PB1
+#endif
+
+#define USE_VOLTAGE_DIVIDER // use a voltage divider on pin 7, not VCC
+#ifndef VOLTAGE_PIN
+#define VOLTAGE_PIN PB2     // pin 7, voltage ADC
+#define VOLTAGE_CHANNEL 0x01 // MUX 01 corresponds with PB2
+#define VOLTAGE_ADC_DIDR ADC1D  // Digital input disable bit corresponding with PB2
+// 1.1V reference, left-adjust, ADC1/PB2
+//#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | (1 << ADLAR) | VOLTAGE_CHANNEL)
+// 1.1V reference, no left-adjust, ADC1/PB2
+#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | VOLTAGE_CHANNEL)
+#endif
+#define ADC_PRSCL   0x06    // clk/64
+
+// Raw ADC readings at 4.4V and 2.2V (in-between, we assume values form a straight line)
+#ifndef ADC_44
+#define ADC_44 234
+#endif
+#ifndef ADC_22
+#define ADC_22 117
+#endif
+
+#define TEMP_CHANNEL 0b00001111
+
+#define FAST 0xA3           // fast PWM both channels
+#define PHASE 0xA1          // phase-correct PWM both channels
+
+#define LAYOUT_DEFINED
+
+#endif
-- 
cgit v1.2.3