From 583854e37efde7f461e073e735a1736b02d28c70 Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Mon, 17 Apr 2023 00:08:32 -0600
Subject: switched the rest of FSM + Anduril to use SPDX license headers
 instead of full GPL headers (or all too often, nothing at all)

There are a few "FIXME" entries where I'm not sure about the correct copyright.

---
 hwdef-Mateminco_MT35-Mini.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'hwdef-Mateminco_MT35-Mini.h')

diff --git a/hwdef-Mateminco_MT35-Mini.h b/hwdef-Mateminco_MT35-Mini.h
index 344f658..995a514 100644
--- a/hwdef-Mateminco_MT35-Mini.h
+++ b/hwdef-Mateminco_MT35-Mini.h
@@ -1,7 +1,9 @@
-#ifndef HWDEF_MT35_MINI_H
-#define HWDEF_MT35_MINI_H
+// Mateminco MT35-Mini / Astrolux FT03
+// Copyright (C) 2022-2023 (FIXME)
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
 
-/* Mateminco MT35-Mini / Astrolux FT03
+/*
  *           ----
  *   Reset -|1  8|- VCC
  * eswitch -|2  7|- Aux LED
@@ -44,4 +46,3 @@
 
 #define LAYOUT_DEFINED
 
-#endif
-- 
cgit v1.2.3


From 490d80aeac2a04db0d8bc9d0613b0a91fa8f373c Mon Sep 17 00:00:00 2001
From: Selene ToyKeeper
Date: Mon, 30 Oct 2023 04:03:35 -0600
Subject: converted mateminco-mt35-mini to new API (but it's not tested; it's
 the only circuit with its particular design,  and I don't have compatible
 hardware)

---
 hwdef-Mateminco_MT35-Mini.h | 48 ---------------------------------------------
 1 file changed, 48 deletions(-)
 delete mode 100644 hwdef-Mateminco_MT35-Mini.h

(limited to 'hwdef-Mateminco_MT35-Mini.h')

diff --git a/hwdef-Mateminco_MT35-Mini.h b/hwdef-Mateminco_MT35-Mini.h
deleted file mode 100644
index 995a514..0000000
--- a/hwdef-Mateminco_MT35-Mini.h
+++ /dev/null
@@ -1,48 +0,0 @@
-// Mateminco MT35-Mini / Astrolux FT03
-// Copyright (C) 2022-2023 (FIXME)
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-/*
- *           ----
- *   Reset -|1  8|- VCC
- * eswitch -|2  7|- Aux LED
- *  1x7135 -|3  6|- NC
- *     GND -|4  5|- FET
- *           ----
- */
-
-#define PWM_CHANNELS 2
-
-#ifndef SWITCH_PIN
-#define SWITCH_PIN   PB3    // pin 2
-#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
-#endif
-
-#ifndef PWM1_PIN
-#define PWM1_PIN PB4        // pin 3, 1x7135 PWM
-#define PWM1_LVL OCR1B      // OCR1B is the output compare register for PB0
-#endif
-
-#ifndef PWM2_PIN
-#define PWM2_PIN PB0        // pin 5, FET PWM
-#define PWM2_LVL OCR0A      // OCR0A is the output compare register for PB4
-#endif
-
-#define ADC_PRSCL   0x07    // clk/128
-
-// average drop across diode on this hardware
-#ifndef VOLTAGE_FUDGE_FACTOR
-#define VOLTAGE_FUDGE_FACTOR 7  // add 0.35V
-#endif
-
-// lighted button
-#ifndef AUXLED_PIN
-#define AUXLED_PIN   PB2    // pin 7
-#endif
-
-#define FAST 0xA3           // fast PWM both channels
-#define PHASE 0xA1          // phase-correct PWM both channels
-
-#define LAYOUT_DEFINED
-
-- 
cgit v1.2.3