From 583854e37efde7f461e073e735a1736b02d28c70 Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Mon, 17 Apr 2023 00:08:32 -0600 Subject: switched the rest of FSM + Anduril to use SPDX license headers instead of full GPL headers (or all too often, nothing at all) There are a few "FIXME" entries where I'm not sure about the correct copyright. --- hwdef-Noctigon_KR4-tintramp.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'hwdef-Noctigon_KR4-tintramp.h') diff --git a/hwdef-Noctigon_KR4-tintramp.h b/hwdef-Noctigon_KR4-tintramp.h index 3bd57fe..78a4d6b 100644 --- a/hwdef-Noctigon_KR4-tintramp.h +++ b/hwdef-Noctigon_KR4-tintramp.h @@ -1,7 +1,9 @@ -#ifndef HWDEF_KR4_TINTRAMP_H -#define HWDEF_KR4_TINTRAMP_H +// Noctigon KR4 w/ tint ramping +// Copyright (C) 2021-2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once -/* Noctigon KR4 w/ tint ramping +/* * (same driver as D4Sv2-tintramp, but with the switch on a different pin) * * Pin / Name / Function @@ -43,4 +45,3 @@ // the rest of the config is the same as D4Sv2-tintramp #include "hwdef-Emisar_D4Sv2-tintramp.h" -#endif -- cgit v1.2.3 From 688387a75413fe8213ac1bf1458176ddaa7df0ae Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Thu, 27 Apr 2023 04:26:03 -0600 Subject: Noctigon KR4-tintramp updated to use new channel system (was easy since it just uses the generic Emisar-2ch build with a couple small overrides) --- hwdef-Noctigon_KR4-tintramp.h | 47 ------------------------------------------- 1 file changed, 47 deletions(-) delete mode 100644 hwdef-Noctigon_KR4-tintramp.h (limited to 'hwdef-Noctigon_KR4-tintramp.h') diff --git a/hwdef-Noctigon_KR4-tintramp.h b/hwdef-Noctigon_KR4-tintramp.h deleted file mode 100644 index 78a4d6b..0000000 --- a/hwdef-Noctigon_KR4-tintramp.h +++ /dev/null @@ -1,47 +0,0 @@ -// Noctigon KR4 w/ tint ramping -// Copyright (C) 2021-2023 Selene ToyKeeper -// SPDX-License-Identifier: GPL-3.0-or-later -#pragma once - -/* - * (same driver as D4Sv2-tintramp, but with the switch on a different pin) - * - * Pin / Name / Function - * 1 PA6 2nd LED PWM (linear) (PWM1B) - * 2 PA5 R: red aux LED (PWM0B) - * 3 PA4 G: green aux LED - * 4 PA3 B: blue aux LED - * 5 PA2 button LED - * 6 PA1 Opamp 2 enable (2nd LEDs) - * 7 PA0 Opamp 1 enable (main LEDs) - * 8 GND GND - * 9 VCC VCC - * 10 PC5 (none) - * 11 PC4 (none) - * 12 PC3 RESET - * 13 PC2 (none) - * 14 PC1 SCK - * 15 PC0 main LED PWM (FET) (PWM0A) (unused on some models because tint ramping) - * 16 PB3 main LED PWM (linear) (PWM1A) - * 17 PB2 MISO / e-switch (PCINT10) - * 18 PB1 MOSI / battery voltage (ADC6) - * 19 PB0 (none) - * 20 PA7 (none) - * ADC12 thermal sensor - */ - -#define ATTINY 1634 -#include - -// move the switch to a different pin -#define SWITCH_PIN PB2 // pin 17 -#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt -#define SWITCH_PCIE PCIE1 // PCIE1 is for PCINT[11:8] -#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8] -#define SWITCH_PORT PINB // PINA or PINB or PINC -#define SWITCH_PUE PUEB // pullup group B -#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8] - -// the rest of the config is the same as D4Sv2-tintramp -#include "hwdef-Emisar_D4Sv2-tintramp.h" - -- cgit v1.2.3