From 688387a75413fe8213ac1bf1458176ddaa7df0ae Mon Sep 17 00:00:00 2001 From: Selene ToyKeeper Date: Thu, 27 Apr 2023 04:26:03 -0600 Subject: Noctigon KR4-tintramp updated to use new channel system (was easy since it just uses the generic Emisar-2ch build with a couple small overrides) --- hwdef-noctigon-kr4-2ch.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 hwdef-noctigon-kr4-2ch.h (limited to 'hwdef-noctigon-kr4-2ch.h') diff --git a/hwdef-noctigon-kr4-2ch.h b/hwdef-noctigon-kr4-2ch.h new file mode 100644 index 0000000..a450693 --- /dev/null +++ b/hwdef-noctigon-kr4-2ch.h @@ -0,0 +1,47 @@ +// Noctigon KR4 w/ tint ramping +// Copyright (C) 2021-2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +/* + * (same driver as emisar-2ch, but with the switch on a different pin) + * + * Pin / Name / Function + * 1 PA6 2nd LED PWM (linear) (PWM1B) + * 2 PA5 R: red aux LED (PWM0B) + * 3 PA4 G: green aux LED + * 4 PA3 B: blue aux LED + * 5 PA2 button LED + * 6 PA1 Opamp 2 enable (2nd LEDs) + * 7 PA0 Opamp 1 enable (main LEDs) + * 8 GND GND + * 9 VCC VCC + * 10 PC5 (none) + * 11 PC4 (none) + * 12 PC3 RESET + * 13 PC2 (none) + * 14 PC1 SCK + * 15 PC0 main LED PWM (FET) (PWM0A) (unused on some models because tint ramping) + * 16 PB3 main LED PWM (linear) (PWM1A) + * 17 PB2 MISO / e-switch (PCINT10) + * 18 PB1 MOSI / battery voltage (ADC6) + * 19 PB0 (none) + * 20 PA7 (none) + * ADC12 thermal sensor + */ + +#define ATTINY 1634 +#include + +// move the switch to a different pin +#define SWITCH_PIN PB2 // pin 17 +#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt +#define SWITCH_PCIE PCIE1 // PCIE1 is for PCINT[11:8] +#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8] +#define SWITCH_PORT PINB // PINA or PINB or PINC +#define SWITCH_PUE PUEB // pullup group B +#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8] + +// the rest of the config is the same as the generic Emisar 2ch build +#include "hwdef-emisar-2ch.h" + -- cgit v1.2.3